• 제목/요약/키워드: Feed Water Temperature

검색결과 399건 처리시간 0.022초

Alkanolamine계 수용액을 이용한 이산화탄소 흡수에 관한 연구 (A Study on the Absorption of $CO_2$Using Alkanolamine Solution)

  • 이성남;송호철;현재휴;박진원
    • 한국대기환경학회지
    • /
    • 제17권5호
    • /
    • pp.407-414
    • /
    • 2001
  • In this study, the absorption kinetics of $CO_2$onto a mixture of AMP (2-amino-2-methyl-1-propanol) MEA (monoethanolamine) water were investigated at 30 and 4$0^{\circ}C$ using a packed absorption tower. Solubility and absorption rate of $CO_2$into alkanolamine solutions and optimal condition of $CO_2$absorption process were investigated. The experimental conditions are as follows; temperature of 30 and 4$0^{\circ}C$, gas flow rate of 3ι/min for the absorption tower, and liquid flow rate of 0.1ι/min. Feed gas was a mixture of 85% $N_2$and 15% $CO_2$. The experimental results showed that AMP had greater solubilities and faster absorption rates than MEA and DEA. In addition, MEA had the fastest initial reaction rate. To improve the properties of AMP which have low initial reaction rate and high cost, AMP was used with MEA. The mixing ratio was also changed in constant total molarity of 1,2,3 and 4. The experimental results can be summarized as follows: (1) in solubility experiment, the addition of MEA in constant total polarity decreased the solubility of $CO_2$in AMP/MEA mixture. (2) from 0 to about 0.3 in mixing ratio, the solubility of $CO_2$in AMP/MEA mixture had little differences compared with the sum of solubility of AMP only and solubility of MEA only . (3) mixing ratio of 0.3 was found to be an optimal point with the fastest $CO_2$absorption rate.

  • PDF

Performance evaluation of submerged membrane bioreactor for model textile wastewater treatment

  • Guembri, Marwa;Saidi, Neila;Neifar, Mohamed;Jaouani, Atef;Heran, Marc;Ouzari, Hadda-Imene
    • Membrane and Water Treatment
    • /
    • 제11권2호
    • /
    • pp.123-130
    • /
    • 2020
  • Submerged Membrane bioreactor (SMBR) is one of the last techniques that allow a high quality of treated industrial effluents by coupling biological treatment and membrane separation. Thus, this research was an effort to evaluate performance of a SMBR treating a model textile wastewater (MTWW). Different SMBR operating parameters like mixed liquor suspended solids (MLSS) and Dissolved oxygen concentration, hydraulic retention time (HRT), and nutrients addition (N and P) have been investigated. MTWW (influent to the SMBR) was generated using the reactive azo-dye, Novacron blue FNG (100mg/L feed concentration). Results of MTWW treatment using SMBR under optimal operating conditions (MLSS, 4.2-13.3g/L; HRT, 4 days; pH, 6.9-7.2; conductivity, 400-900 μS/cm and temperature, 19.4-22.2 ℃) showed that COD and blue colour treatment performances are between 94-98% and 30-80%, respectively. It is concluded that SMBR can be used in large scale textile wastewater treatment plants to improve effluent quality in order to meet effluent discharge standards.

Culicoides arakawae의 실험실내 colonization (Experimental colonization of Culicoides arakawae in laboratory)

  • 최상호;주후돈;위성환;김기석;박근식
    • 대한수의학회지
    • /
    • 제33권3호
    • /
    • pp.471-478
    • /
    • 1993
  • Culicoides arakawae is a kind of the main blood sucking insects of domestic fowls and serves as a vector of Leukocytozoom caulleryi, the causative protozoon of chicken leukocytozoonosis. In this study, the complete life history of C arakawae was cycled by laboratory colonization. Adult midges were collected from various poultry farm by light trap. The laboratory colonization was performed under the conditions of constant temperature of $25{\pm}1^{\circ}C$ and relative humidity of 80% or above. The hatched larvae were cultured in larval medium consisted of rice field mud and activated charcoal powder. The surface of medium was continuously flowed with biologically conditioned water. The fine powder meal composed of pellet feed for mice and equal mount of yeast was supplied for feeding larvae at every 72 hours. The life cycle completed at $25^{\circ}C$ in 35~35 days ; the period of preoviposition, egg. larval and pupal stage was 2~3, 3~4, 28~30 and 3 days, respectively. The measurements of the eggs, the lst instar larvae, the 4th instar larvae and pupae was $36.28{\mu}m{\pm}1.95$, $13.58{\mu}m{\pm}0.72$, $4000{\mu}m{\pm}1.47$ and $219.95{\mu}m{\pm}6.25$ in $mean{\pm}S.D.$, respectively. In order to confirm experimental colonization of C arakawae in laboratory, the colonized adult midges were allowed to suck blood from chicken infected with L caulleryi. The oocysts and sporozoites could be identified in midguts and salivary grands of engorged midges at 72 hours after blood sucking.

  • PDF

다중금속복합층 핵연료 피복관의 필거링 공정에 관한 유한 요소 해석 연구 (Finite Element Analysis of Pilgering Process of Multi-Metallic Layer Composite Fuel Cladding)

  • 김태용;이정현;김지현
    • 한국압력기기공학회 논문집
    • /
    • 제13권2호
    • /
    • pp.75-83
    • /
    • 2017
  • In severe accident conditions of light water reactors, the loss of coolant may cause problems in integrity of zirconium fuel cladding. Under the condition of the loss of coolant, the zirconium fuel cladding can be exposed to high temperature steam and reacted with them by producing of hydrogen, which is caused by the failure in oxidation resistance of zirconium cladding materials during the loss of coolant accident scenarios. In order to avoid these problems, we develop a multi-metallic layered composite (MMLC) fuel cladding which compromises between the neutronic advantages of zirconium-based alloys and the accident-tolerance of non-zirconium-based metallic materials. Cold pilgering process is a common tube manufacturing process, which is complex material forming operation in highly non-steady state, where the materials undergo a long series of deformation resulting in both diameter and thickness reduction. During the cold pilgering process, MMLC claddings need to reduce the outside diameter and wall thickness. However, multi-layers of the tube are expected to occur different deformation processes because each layer has different mechanical properties. To improve the utilization of the pilgering process, 3-dimensional computational analyses have been made using a finite element modeling technique. We also analyze the dimensional change, strain and stress distribution at MMLC tube by considering the behavior of rolls such as stroke rate and feed rate.

화재모델 CFAST를 이용한 원전 화재구역의 CCDP평가(II) (CCDP Evaluation of the Eire Areas in NPP Applying CEAST Model (II))

  • 이윤환;양준언;김종훈;김운형
    • 한국화재소방학회논문지
    • /
    • 제19권3호
    • /
    • pp.20-27
    • /
    • 2005
  • 본 논문에서는 화재 모델 CFAST를 사용하여 원자력발전소에 있는 8개 펌프실의 화재 안전 수준을 평가해 보고, 그 결과를 조건부 노심손상확률에 반영하여 분석해 보았다. 분석 대상 구역은 원자력발전소 일차보조건물에 위치한 고압안전주입 펌프실 A/B,저압안전주입 펌프실 A/B, 격납건물 살수 펌프실 A/B 및 모터구동 보조급수 펌프실 A/B 총 8곳이었다. 각 화재구역의 상부층 가스 온도를 분석하였으며, 분석 결과를 바탕으로 상부층에 위치한 케이블의 손상 유무를 파악하였다. 분석 결과에 의하면 총 8개 화재구역의 상부층 케이블은 건전성을 유지하는 것으로 확인되었다. 케이블의 건전성 평가 결과를 바탕으로 각 화재구역의 조건부 노심손상확률을 평가한 결과, 기존의 보수적인 가정 하에 수행된 화재위험도분석 결과보다 약 2배정도 감소하는 보다 현실적이고 불확실성이 감소한 결과를 도출할 수 있었다.

미강안정화(米糠安定化)를 위한 저렴 Extruder의 개발 및 이용 (Development and Use of a Low-Cost Extruder for the Rice-Oil Stabilization)

  • 최홍식;김철진
    • 한국식품과학회지
    • /
    • 제16권1호
    • /
    • pp.37-40
    • /
    • 1984
  • 국내도정공장에 간단히 부착운용할 수있는 미강안정화 처리용 저렴 Extruder (K-E3030 - 100. 처리능력 시간당 400kg)를 개발하였다. 부산된 미강을 그대로 안정화기로 처리하면 pellet형으로 성형된 안정화 미강을 얻을 수 있다. 안정화 처리온도는 원료투입속도를 조절함으로서 $95-150^{\circ}C$ 범위에서 조절이 가능하며, 이때 전력 소모량은 원료미강kg 당 0.060-0.070KWH이었다. 안정화 처리미강은 처리온도에 따라 용적밀도가 원료미강의 0.313g/cc에서 0.526-0.601g/cc로 증가하였고, 수분함량은 13.08%에서 10.41-6.03%로 감소하였다. 그리고, 처리온도가 $120^{\circ}C$이상인 경우에는 학절기의 기후 조건하에서 9 주간 저장하여도 유리 지방산의 함량이 15%를 넘지 못하였다.

  • PDF

핵융합 배가스 중 수소 회수를 위한 촉매반응 특성 연구 (Study on the Characteristics of Catalyst Reaction for Hydrogen Recovery from Nuclear Fusion Exhaust Gas)

  • 정우찬;정필갑;김정원;문흥만
    • 한국수소및신에너지학회논문집
    • /
    • 제26권5호
    • /
    • pp.402-408
    • /
    • 2015
  • In D-T fusion reaction, $D_2$ (duterium) and $T_2$(tritium) are used as fuel gas. The exhaust gas of nuclear fusion includes hydrogen isotopes $Q_2$ (Q means H, D or T), tritiated components ($CQ_4$ and $Q_2O$), CO, $CO_2$, etc. All of hydrogen isotopes should be recovered before released to the atmosphere. This study focused on the recovery of hydrogen isotopes from $CQ_4$ and $Q_2O$. Two kinds of experiments were conducted to investigate the catalytic reaction characteristics of SMR (Steam Methane Reforming) and WGS (Water Gas Shift) reactions using Pt catalyst. First test was performed to convert $CH_4$ into $H_2$ using 6% $CH_4$, 6% CO/Ar feed gas. In the other test, 100% CO gas was used to convert $H_2O$ into $H_2$ at various reaction conditions (reaction temperature, S/C ratio, GHSV). As a result of the first test, $CH_4$ and CO conversion were 41.6%, 57.8% respectively at $600^{\circ}C$, S/C ratio 3, GHSV $2000hr^{-1}$. And CO conversion was 72% at $400^{\circ}C$, S/C ratio 0.95, GHSV $333hr^{-1}$ in the second test.

매립지가스(LFG)로부터 합성가스 제조시 반응조건에 따른 수율에 미치는 연구 (A Effect of Reaction Conditions on Syngas Yield for the Preparation of Syngas from Landfill Gas)

  • 조욱상;최경돈;백영순
    • 한국수소및신에너지학회논문집
    • /
    • 제26권5호
    • /
    • pp.477-483
    • /
    • 2015
  • LFG (Land-Fill Gas) includes components of $CH_4$, $CO_2$, $O_2$, $N_2$, and water. The preparation of synthesis gas from LFG as a DME (Dimethyl Ether) feedstock was studied by methane reforming of $CO_2$, $O_2$ and steam over $NiO-MgO-CeO_2/Al_2O_3$ catalyst. Our experiments were performed to investigate the effects of methane conversion and syngas yield on the amount of LFG components over $NiO-MgO-CeO_2/Al_2O_3$ catalyst. Results were obtained through the methan reforming experiments at the temperature of $900^{\circ}C$ and GHSV of 8,800. The results were as following; it has generally shown that syngas yield increase with the increase of oxygen and steam amounts and then decrease. Highly methane conversion of above 98% and syngas yield of approximately 60% were obtained in the feed of gas composition flow-rate of 243ml/min of $CH_4$, 241ml/min of $CO_2$, 195ml/min of $O_2$, 48ml/min of $N_2$, and 450ml/min of steam, respectively, under reactor pressure of 1 bar for 200 hrs of reaction time. Also, it was shown that catalyst deactivation by coke formation was reduced by excessively adding oxygen and steam as an oxidizer of the methane reforming.

Enhanced oxidative stability of meat by including tannin-rich leaves of woody plants in goat diet

  • Garcia, Elisa Mariana;Lopez, Agustin;Zimerman, Maria;Hernandez, Olegario;Arroquy, Jose Ignacio;Nazareno, Monica Azucena
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제32권9호
    • /
    • pp.1439-1447
    • /
    • 2019
  • Objective: The aim of this study was to evaluate the effect of dietary incorporation of tanninrich woody species on meat oxidative stability, carcass traits and meat quality in goats. Methods: Two tannin-rich species were tested using a three-treatments feeding trial, where treatments consisted of: Larrea divaricata and Acacia aroma both at 12.5% in dry matter basis of the diet and a control diet (alfalfa hay). All feeding diets were iso-protein and iso-energy. Carcass conformation, carcass compactness, carcass fatness and subcutaneous fat deposition were evaluated. Intake, liveweigh, Longissimus thoracis et lumborum muscles of goats were analyzed in order to evaluate quality parameters such as pH value, instrumental color evaluation, water holding capacity, total phenolic content, antioxidant activity, meat oxidative stability and fatty acid profiles in meat. Results: Feed intake, liveweight gain, carcass, and meat traits did not differ among treatments. Changes in meat lipid profile among treatments were observed for oleic and elaidic acid contents. Meat total phenolic content and antioxidant activity did not differ among treatments; although, meat oxidative status after storage at room temperature, as well as under refrigerated and frozen conditions were different between control and both supplemented groups. Conclusion: The inclusion of Acacia aroma and Larrea divaricata leaves in goat diet enhanced meat oxidative stability. Modulation of the ruminal biohydrogenation of fatty acids produced by condensed tannins of these plant species need to be further investigated.

저수온기 넙치(Paralichthys olivaceus) 사료 내 가수분해 혈분(Hydrolyzed Blood Meal)의 이용성 평가 (Evaluation of Dietary Supplementation with Hydrolyzed Blood Meal for Olive Flounder Paralichthys olivaceus, in Low Water Temperature Conditions)

  • 임종호;고대현;조화정;이경준
    • 한국수산과학회지
    • /
    • 제56권4호
    • /
    • pp.532-540
    • /
    • 2023
  • This study aimed to evaluate the effects of dietary supplementation with two different types of hydrolyzed blood meal (HBM) on the growth performance, feed utilization, digestibility and innate immunity of olive flounder Paralichthys olivaceus. A control diet (Con) consisting of 60% fish meal was formulated and four diets containing two different types of HBM at varying concentrations were prepared 2.5 and 5.0% liquid HBM (L2.5 and L5.0) and 0.5 and 1.0% powdered HBM (P0.5 and P1.0). A total of 450 olive flounder (average body weight: 50±0.07 g) were distributed in 15 tanks (240 L), with three replicate groups per diet. The fish were fed the diets to apparent satiation for 9 weeks and subsequently exposed to Edwardsiella tarda. The results showed that fish fed L2.5, L5.0 and P0.5 diets exhibited significantly higher lysozyme activity compared to those fed the Con and P1.0 diets. During the challenge test against E. tarda, the L5.0 and P0.5 fish groups exhibited higher disease resistance than that of the Con group. These findings indicate that dietary supplementation with HBM could positively effect the innate immunity and disease resistance of olive flounder.