• Membrane Journal
• /
• v.32 no.2
• /
• pp.126-132
• /
• 2022

Water purifiers have a quite different characteristic in comparison with general membrane water treatment processes in which the running and resting are repeated dozens of times a day. In the case of water purifiers using reverse osmosis membranes, this characteristic makes a phenomenon that the total dissolved solids (TDS) of permeate in water purifiers at the beginning of running shows a higher value than a normal value (TDS reduction is lower than a normal value). It is called "TDS creep". The effects of resting times and feed concentrations on the TDS creep were investigated. The feed flushing, the volume increase in permeate side and the flushing with purified water were applied to reduce TDS creep and the effectiveness were observed. Among these trials, the minimization of concentration between feed and permeate side of reverse osmosis membrane like the flushing with purified water can be an ultimate solution to reduce the TDS creep.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.11
• /
• pp.1657-1661
• /
• 2015

Newborn chicks are susceptible to Salmonella enterica serovar Enteritidis (SE). The objective of this study was to evaluate the effect of Lactobacillus probiotic isolated from chicken feces on heterophil phagocytosis in broiler chicks. A total of 150 newborn broiler chicks were divided into 5 groups (30 chicks per group) as follows: group 1 (normal control), given feed and water only, group 2 (positive control) given feed, water and SE infection, group 3 (L61 treated) given feed, water, SE infection followed by Lactobacillus salivarius L61 treatment, group 4 (L55 treated) given feed, water, SE infection followed by L. salivarius L55 treatment, and group 5 given feed, water, SE infection followed by L. salivarius L61 + L55 combination treatment. After SE infection, L. salivarius treatment lasted for 7 days. The results showed that L. salivarius L61 and L. salivarius L55 treatment, either alone or combination of both, increased the survival rate after SE infection, and upregulated heterophil phagocytosis and phagocytic index (PI). Conversely, chick groups treated with Lactobacillus showed lower SE recovery rate from cecal tonsils than that of the positive control group. The PI values of the chicken group with SE infection, followed by the combination of L. salivarius L61 and L. salivarius L55 were the highest as compared to either positive control or normal control group. Two Lactobacillus strains supplementation group showed significantly (p<0.05) higher PI value at 48 h than 24 h after treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.756-761
• /
• 2017

This study investigated the growth of juvenile mandarin fish Siniperca scherzeri, reared at high water temperatures. Feed-trained juvenile fish were reared at four water temperatures: 27, 29, 31, and $33^{\circ}C$. The fish were fed to apparent satiation twice daily using pelleted diet. After 10 weeks of feeding trial, the survival exceeded 98% in all groups. The weight gain of fish reared at $31^{\circ}C$ was higher than for fish reared at the other temperatures. The feed efficiency and protein efficiency ratio of fish reared at 29 and $31^{\circ}C$ were higher than for the fish reared at 27 and $33^{\circ}C$. The daily feed intake of fish reared at 27 and $33^{\circ}C$ was higher than for the 29 and $31^{\circ}C$ groups. The whole body moisture content of fish reared at $33^{\circ}C$ was higher than in the $27^{\circ}C$ group. The whole body crude protein and lipid contents of fish reared at $27^{\circ}C$ were higher than in the $33^{\circ}C$ group. The results indicate that suitable rearing water temperature was $31^{\circ}C$ for optimal growth and feed efficiency of juvenile mandarin fish under the experimental conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.663-670
• /
• 2019

Corrective thermal performance analysis is required for power plants' turbine cycles to determine the performance status of the cycle and improve the economic operation of the power plant. We developed a sectional classification method for the main feed-water flow to make precise corrections for the performance analysis based on the Performance Test Code (PTC) of the American Society of Mechanical Engineers (ASME). The method was developed for the estimation of the turbine cycle performance in a classified section. The classification is based on feature identification of the correlation status of the main feed-water flow measurements. We also developed predictive algorithms for the corrected main feed-water through a Kernel Regression (KR) model for each classified feature area. The method was compared with estimation using an Artificial Neural Network (ANN). The feature classification and predictive model provided more practical and reliable methods for the corrective thermal performance analysis of a turbine cycle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.8
• /
• pp.1196-1200
• /
• 2008

An experiment was conducted to evaluate the physiological changes of laying hens subjected to feed removal during induced molting while received probiotics in the drinking water. Post-molt performance and egg quality criteria were also studied. Ninety 78-week-old Hy-line W36 laying hens were divided into two treatment groups according to equal body weight and subjected to induced molting by continuous feed removal until around 30% BW reduction. The experiment lasted 12 wks consisting of 4-wk molting and 8-wk post-molt periods. Treatment 1 received no probiotics and was considered as the control. Treatment 2 was similar to the control except that hens received probiotics in the drinking water at 400 mg/L during feed deprivation. The results indicated that hens in both groups went out of production by Day 5. However, hens received probiotics reached 5 and 50% egg production sooner than the control (30 and 52 days vs. 31 and 54 days). Starvation during molting increased heterophil to lymphocyte (H/L) ratio, hematocrit and plasma T4 and $Na^+$ levels while plasma T3 and Cl- levels were decreased. Probiotics had no significant impact on BW reduction during molt. Post-molt egg production and egg mass were higher in hens which previously received probiotics, but these responses were not significant. However, feed conversion ratio was significantly better in hens which received probiotics. Hematocrit, plasma thyroid hormone concentrations (T3 and T4) and plasma $Na^+$, $K^+$ and Cl- levels during molting were not significantly influenced by supplementation of probiotics. However, H/L ratio showed a significant (p<0.05) reduction in birds which received probiotics suggesting beneficial effects of this product for feed-deprived laying hens. No significant difference was observed in post-molt egg quality criteria.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.7
• /
• pp.999-1005
• /
• 2015

Bacillus-based feed additive was evaluated for its efficacy on growth performance, nutrient digestibility, fecal gas emission, and the consumption of time and amount of water for cleaning the pen of growing finishing pigs. A total of 120 growing pigs ($23.59{\pm}1.41kg$) were used in a 16-wk feeding trial. Pigs were randomly distributed into 1 of 2 treatments on the basis of body weight and sex. There were 12 replicate pens per treatment, with 5 pigs (3 barrows and 2 gilts) per pen. Dietary treatments were CON which was basal diet, and T1 which was CON+62.5 ppm microbial feed additive that provided $1.47{\times}10^8cfu$ of Bacillus organisms per gram of supplement. During the weeks 0 to 6, average daily gain (ADG) in T1 treatment was higher (p<0.05) than CON, but no improvement in average daily feed intake (ADFI) and feed efficiency (G:F) was noted. During 6 to 16 weeks, no difference (p>0.05) was noted in growth performance. However, ADG was improved (p<0.05) and overall ADFI tended (p = 0.06) to improve in T1 compared with CON. At week 6, the co-efficient of apparent total tract digestibility (CATTD) of dry matter (DM) nitrogen (N) was increased (p<0.05) in T1 compared with CON. Fecal $NH_3$ emission was decreased (p<0.05) in T1 compared with CON, at the end of 6th and 15th weeks. The time and water consumed for washing the pens were decreased (p<0.05) in T1 compared with CON. In conclusion, supplementation with Bacillus-based feed additive could improve the overall growth performances, increase the CATTD of DM and decrease the fecal $NH_3$ content and the time and water consumed in washing the pens for growing-finishing pigs.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1407-1414
• /
• 2014

Physicochemical properties of rice-based expanded snacks extruded with rice flour, high amylose starch, and isolated soy protein were investigated using a twin-screw extruder. The ingredients were extruded at various feed moisture contents (19~23%) and screw speeds (200~400 rpm) at a constant feed rate (43.4 kg/hr). Bulk density and apparent density of rice snacks were 0.06~0.21, and 0.55~0.65 respectively. Bulk density, apparent density, water absorption index, and breaking strength of rice snacks increased with increasing feed moisture content and decreasing screw speed. However, expansion and water solubility index of rice snacks increased with decreasing feed moisture content and increasing screw speed. Hunter's color L values of rice snacks was lower with increasing screw speed at feed moisture contents of 19% and 21%, but was not significantly different from a feed moisture content of 23%. On the other hand, a and b values of rice snacks were higher with increasing screw speed a feed moisture content of 19%. X-ray diffraction intensity of rice snacks decreased with decreasing feed moisture content and increasing screw speed. X-ray diffraction of rice snacks was V-type at feed moisture contents of 19% and 21% and screw speeds of 300, and 400 rpm. In the microstructure of the cross section of rice snacks, air cells in rice snacks were not well formed, and cell walls were thicker with increasing feed moisture content and decreasing screw speed.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.274-283
• /
• 2024

Objective: The aim of the study was to evaluate the physicochemical properties (nutrient composition, pH, water content and activity, sorption properties) and mechanical properties (compression force and energy) of granulated feed mixtures with various inclusion levels of crude fibre concentrates ARBOCEL and VITACEL for broiler chickens, i.e. +0.0% (control group - group C), +0.3%, +0.8%, +1.0%, +1.2%. Methods: The feed mixtures were analyzed for their physicochemical properties (nutrient composition by near-infrared spectroscopy, pH with the use a CP-401 pH meter with an IJ-44C glass electrode, water content was determined with the drying method and activity was determined with the Aqua Lab Series 3, sorption properties was determined with the static method) and mechanical properties (compression force and energy with the use TA-HD plus texture analyzer). The Guggenheim-Anderson-de Boer (GAB) model applied in the study correctly described the sorption properties of the analyzed feed mixtures in terms of water activity. Results: The fibre concentrate type affected the specific surface area of the adsorbent and equilibrium water content in the GAB monolayer (p≤0.05) (significantly statistical). The type and dose of the fibre concentrate influenced the dimensionless C and k parameters of the GAB model related to the properties of the monolayer and multilayers, respectively (p≤0.05). They also affected the pH value of the analyzed feed mixtures (p≤0.05). In addition, crude fibre type influenced water activity (p≤0.05) as well as compression energy (J) and compression force (N) (p≤0.001) (highly significantly statistical) of the feed mixtures. Conclusion: The physicochemical analyses of feed mixtures with various inclusion levels (0.3%, 0.8%, 1.0%, 1.2%) of crude fiber concentrates ARBOCEL or VITACEL demonstrated that both crude fiber types may be used in the feed industry as a feedstuff material to produce starter type mixtures for broiler chickens.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.3
• /
• pp.304-311
• /
• 2014

In this study, to apply hydrogen energy to ship engine and to generate effective hydrogen production, we investigated the effects of high temperature $H_2SO_4$ feed rate and cooling water rate to pump parts with fixed frequency needed to reciprocate motion and a simulation was conducted at each condition. In the fixed frequency and cooling water inlet flow rate of 0.5 Hz and 3.9 kg/s, we changed the high temperature $H_2SO_4$ flow rate to 47.46 kg/s (it is 105 % of 45.2 kg/s), 49.72 kg/s (110 %), and 51.98 kg/s (115 %). Also, at 0.5 Hz and 45.2 kg/s of frequency and high temperature $H_2SO_4$ flow, the thermal hydraulic analysis was performed at the condition of 95 % (3.705 kg/s), 90 % (3.51 kg/s), and 85 % (3.315 kg/s). In overall simulation cases, the physical properties of materials are more influential to the temperature increase in the pump part rather than the changes on the feed rate of high temperature $H_2SO_4$ and cooling water. A continuous operation of pump was also capable even if the excess feed of high temperature $H_2SO_4$ of about 15 % or the less feed of cooling water of about 15 % were performed, respectively. When the increasing feed of high temperature $H_2SO_4$ of up to 5 %, 10 %, and 15 % were compared with base flow (45.2 kg/s), the deviation of time period rose to a certain temperature and ranged from 0 to 4.5 s in the same position (same material). In case of cooling water, the deviation of time period rose to a certain temperature and ranged from 0 to 5.9 s according to the decreasing feed changes of cooling water at 5 %, 10 %, and 15 % compared to a base flow (3.9 kg/s). Finally, the additional researches related to the two different materials (Teflon and STS for Pitch and End-plate), which are concerned about the effects of temperature changes to the parts contacting different materials, are needed, and we have a plan to conduct a follow-up study.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.3
• /
• pp.33-38
• /
• 2010

The evaporative desalination system using solar thermal energy would be the efficient and attractive method to get fresh water from brine due to low carbon dioxide generation. In this research the solar desalination system as a heating source of refrigerant R123 in the evaporator was considered. The circulation of refrigerant in the evaporator can reduce the energy consumption of the system, because of using the latent heat of the refrigerant 123 instead of the sensible heat of present hot water. The system was comprised of the single-stage fresh water production unit on the capacity of 1ton/day with shell and tube type evaporator, heaters instead of solar collector to supply the proper heat to refrigerant, and refrigerant and brine circulation systems. Various operating flowrate and temperature ranges were varied in the experiments to get the optimum design data. The results showed that the optimum flow rate of brine feed rate to evaporator was 1.2Liter/min, and the yield of fresh water was increased as higher temperature of feed brine. It was confirmed that the circulation flowrate of heating source of refrigerant was decrease of one fifth of the present warm water system, and very efficient system for solar desalination.