• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.732-736
• /
• 2008

The traditional method to calculate the gravity feed is to assume that only one tank in fuel system supplies the needed fuel to the engine, and then calculated for the single branch. Actually, all fuel tanks compete for supplying oil. Our method takes into consideration all fuel tanks and therefore, we believe, our method is intrinsically superior to traditional methods and is closer to understanding the real seriousness of the oil supply situation. Firstly, the thesis gives the mathematical model for fuel flow pipe, pump, check valve and the simulation model for fuel tank. On the basis of flow network theory and time difference method, we established a new calculation method for gravity feed oil of aeroplane fuel system, secondly. This model can solve the multiple-branch and transient process simulation of gravity feed oil. Finally, we give a numerical example for a certain type of aircraft, achieved the variations of oil level and flow mass per second of each oil tanks. In addition, we also obtained the variations of the oil pressure of the engine inlet, and predicted the maximum time that the aeroplane could fly safely under gravity feed. These variations show that our proposed method of calculations is satisfactory.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권1호
• /
• pp.86-90
• /
• 2006

This study was carried out to determine the effects of free choice feeding of starter feed and whole cereals on the growth of turkey poults. Two hundred-seventy poults (7-d old) were divided into 3 treatment groups each with 3 replications containing 15 males and 15 females. Control poults (C) were fed only on starter feed (280 g CP and 11.7 MJ ME/kg). Treatments for choice-fed turkey poults were offered a choice of a starter feed and wheat (120 g CP and 12.3 MJ ME/kg) for wheat selecting (WS) or maize (83 g CP and 13.9 MJ ME/kg) for maize selecting (MS) group in separate feeders. Final live weight (2,280.7 g for the C vs. 2,374.3 and 2,324.6 g for the WS and MS), daily gain (39.21 g vs. 40.87 and 39.99 g) and total feed intake (95.2 g vs. 103.2 and 97.9 g) in the WS poults were significantly higher (p<0.05) than those of the C group, but feed conversion ratio was not significantly different between the treatments. The proportional intakes of cereals vs. total feed intake were 11% in both the WS and MS group. The amount of protein intake in the C group (280 g CP/kg diet) was significantly (p<0.05) higher than that in WS and MS groups (263 and 259 g CP/kg diet, respectively) whilst the ME intake in the C group (11.7 MJ/kg diet) was significantly (p<0.05) lower than that in MS group (11.9 MJ/kg diet). Our results showed that turkey poults fed starter feed and whole wheat in a free choice feeding system have a higher efficiency in terms of daily gain, final live weight, and an economic advantage may be obtained from free choice feeding due to a reduced protein intake and feed cost.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권3호
• /
• pp.432-444
• /
• 2001

In this manuscript, several effective feeding and management systems to reduce environmental pollution in swine production have been briefly introduced. It is logical that reducing the excretion of nutrients in manure should be the first step to reduce the environmental impact of pig production. it is evident that the excretion of nitrogen and phosphorus can be reduced when more digestible or available feedstuffs are used. Also, it is well known that proper feed processing can reduce anti nutritional factors (ANF) and improve nutrient digestibilities. Supplementation of effective feed additives can reduce excretion of nitrogen and phosphorus due to efficient feed utilization. These include enzymes (e.g., phytase), antibiotics, probiotics, organic acids and growth hormones ($\beta$-agonists and porcine somatotropin). One of the most effective ways to reduce pollutants from swine manure is to use synthetic amino acids in feed manufacturing. Many studies showed that reduction of 2 to 4% unit (U) of dietary protein with supplemental amino acid (AA) could dramatically reduce (15 to 20%) nitrogen excretion. Regarding feeding strategies, it has been recognized that phase feeding regimen could be used to reduce nitrogen and phosphorous excretion by feeding pigs in better agreement with age and physiological state. Feeding barrows and gilts separately, known as split sex feeding, can also decrease excretion of nitrogen and phosphorus. With the increasing concerns on the negative impact of animal production systems on the environment, animal nutritionists and producers should be aware that sustainability of animal agriculture is as important as high production performance. Therefore, some feeding and management strategies described in this manuscript will help to reduce environmental pollution in swine production. Proper combination of feeding regimen and environment-friendly diet formulation through nutritional approach will be more effective to reduce nutrient excretion in swine production system compared to single approach to do so.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.88-94
• /
• 2002

고압의 불활성 기체를 이용하여 엔진에 추진제를 공급하는 액체로켓의 경우, 추진제 탱크의 압력은 정상연소상태의 연소압을 기준으로 하여 설계한다. 그러나 연소초기의 연소실 압력은 대기압 상태이므로 과도한 유량이 공급되어 이로 인해 hard-start가 발생하며, 최악의 경우 엔진의 파손을 가져온다. 본 연구에서는 이러한 문제를 해결하고 안정된 연소를 위하여 개선된 추진제 공급시스템을 제안하며, 이는 실제 연소실험을 통해 그 성능을 규명 하였다. 이 공습시스템은 연소 초기 및 연소 중의 일정한 유량공급을 위해 Cavitating Venturi를 사용하는 시스템이다. Cavitating Venturi는 오직 공급압력에 의해서만 유량이 결정되며, 출구압력에 영향을 받지 않으므로 연소 초기는 물론이고, 연소 중 이상 연소에 의해 연소압이 떨어져도 설계치 이상의 유량이 공급되지 않는다. 본 실험을 통해서 Cavitating Venturi의 설계 영역에서의 유량에 대한 안정성이 입증되었기 때문에, Cavitating Venturi는 액체로켓 이외의 압력강하량 변화가 큰 시스템에서 매우 효과적일 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.3-6
• /
• 2002

This paper presents the cutting simulation system for prediction and regulation of cutting force in CNC machining. The cutting simulation system includes geometric model, cutting force model, and off-line fred rate scheduling model. ME Z-map(Moving Edge node Z-map) is constructed for cutting configuration calculation. The cutting force models using cutting-condition-independent coefficients are developed for flat-end milling and ball-end milling. The off-line feed rate scheduling model is derived from the developed cutting force model. The scheduled feed rates are automatically added to a given set of NC code, which regulates the maximum resultant cutting force to the reference force preset by an operator. The cutting simulation system can be used as an effective tool for improvement of productivity in CNC machining.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.76-79
• /
• 1999

A study on simulation using Matlab shows the dynamic condition of a beam on feed-back with encorder. A controller for rapid response interpreted the stability on simulation with pole-placement technique. The effect of response was considered feed-back gain. The result of feed-back is described that various feed-back coefficient shows stable controll systems. It would be expected each result according to controllers.

• 대한전자공학회논문지
• /
• 제15권3호
• /
• pp.7-10
• /
• 1978

이 논문은 single transistor를 사용하여 정현파를 전파정류하는 한 방법을 검토한다. switching으로 동작되는 inverter에 R-feed back을 하고 최적 parameter를 설정하므로써 도통상태의 반파와 cut-off 상태에서 feed back을 통한 반파를 합성하여 전파정류의 출력을 얻는다. cassette deck의 code재생 system에 이용한 바 효과적이었고, AGC 등에 이용 가능하다.

• 한국정밀공학회지
• /
• 제15권7호
• /
• pp.104-118
• /
• 1998

In this paper, the motion of ballscrew and shape of workpiece are the main objective variables varying with load conditions. To verify feed mechanism in NC lathe, the monitoring system is designed and cutting condition variables are spindle speed depth of cut and feed. During machining, rotation number of ballscrew motion of ballscrew in direction to gravity center and cutting force are measured. After machining, the roughness of workpiece is measured.

• Journal of Biosystems Engineering
• /
• 제12권4호
• /
• pp.31-43
• /
• 1987

This study was performed to develop a hot water boiler system with small scale automatic rice hull furnace for the multi-purpose use in the farm. For the experiment a prototype hot water boiler system with rice hull furnace was fabricated, which was equipped with automatic hull feeder, igniter and ash removal device. Optimum operational conditions of the prototype: system were analyzed. The results arc summarized as follows. 1. The temperature measured right above the burning surface should be higher than $500^{\circ}C$ combustion. 2. The top zone of the combustion chamber was the most suitable location of the thermocouple to pick up the control temperature for the automatic operation of the rice hull furnace. 3. The content of carbon monoxide in the flue gas was increased with the filling height of burning material but it was less than 0.3 percent in volume in this experiment. When the filling height was expressed as the ratio of rice hull feed rate to the volume of the combustion chamber above the burning surface, the optimum ratio was about $150kg/m^3-h$. 4. The combustion efficiency of the prototype was higher than 95 percent when the feed rate was 1.1 to 2.3 kg/h and moisture content of rice hull was 22.4 percent (w.b.) or less. 5. It was estimated that the optimum operational conditions of the system were 1.3 to 2.0 kg/h in feed rate, 70 to 100 percent in excess air and 500 to $510^{\circ}C$ in control temperature. 6. The efficiency of coil heal exchanger increased with a decrease in feed rate of rice hull. When the rice hull feed rates were 1.1, 1.7 and 2.3 kg/h, the efficiencies of coil heat exchanger were about 34, 30 and 25 percent and heat transfer rates were 5.7, 7.6 and 8.8 MJ/h, respectively. When the flat plate heat exchanger was used in addition to the coil heat exchanger, the efficiency of the heat exchanger system increased to 48 percent.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.768-778
• /
• 1993

The system is designed for the production and processing of feed, fertilizer, sugar , and grain. It can be used to weigh and transport automatically their pellet, power or nonstickness materials. In this system, we use discontinuous totalising automatic weighing instruments to weigh materials. It is a closed-cycle control system controlled by industrial controlling computer STD bus. The system used for processing grain and feed can improve the quality of products , carry out scientific management, increase productivity and decrease the intensity of labour