• Proceedings of the Korean Nuclear Society Conference
• /
• 2001.05a
• /
• pp.94.2-94
• /
• 2001

• Journal of Animal Science and Technology
• /
• v.53 no.6
• /
• pp.525-532
• /
• 2011

Insufficient pre-slaughter fasting leaves serious amount of feed-like contents (designated here as un-fasted stomach spent feed, USSF) in the eviscerated pig stomach. This study was intended to evoke economical and environmental seriousness of USSF discharge by estimating its value as pig feed. For finishing pigs feeding trial, three levels (0, 5, and 10%) of USSF were blended with pig feed to prepare control and two treatment diets, respectively. A total of 42 (21 males, 21 females) crossbred (Landrace ${\times}$ Yorkshire ${\times}$ Duroc) finishing pigs weighing $81.5{\pm}8.0$ kg were employed to 28d feeding trial and in vivo digestibility trial by $Cr_2O_3$ indicator method with 7 males and 7 female pigs per treatment. In vitro total tract digestion of USSF showed 70.5% and 57.6% of DM and OM digestibilities, respectively which were poorer (p<0.05) than those of pig diet. There were no differences in body weight gain, daily feed intake and feed conversion ratio among treatments although 10% USSF substitution exerted relatively poor performance. In vivo apparent digestibilities of diets containing USSF 5% and 10% were lower (p<0.05) than that of 100% pig feed. There were no differences (p>0.05) in dressing percentage and carcass grade among treatments. Results of this study showed that 5% USSF substitution in finishing pigs diet did not exert any disadvantage in terms of production performance and carcass grade. This study implied that un-fasted slaughter causing excessive excretion of USSF should be avoided. If not avoidable, the USSF should not be wasted in abattoir but could be recycled as pig feed.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.154-157
• /
• 2008

A class-E RF(Radio Frequency) power amplifier for wireless application is designed using standard CMOS technology. To drive the class-E power amplifier, a class-F RF power amplifier is used and the reliability characteristics are studied with a class-E load network. The reliability characteristic is improved when a finite-DC feed inductor is used instead of an RF choke with the load. After one year of operating, when the load is an RF choke the output current and voltage of the power amplifier decrease about 17% compared to initial values. But when the load is a finite DC-feed inductor the output current and voltage decrease 9.7%. The S-parameter such as input reflection coefficient(S11) and the forward transmission scattering parameter(S21) is simulated with the stress time. In a finite DC-feed inductor the characteristics of S-parameter are changed slightly compared to an RF-choke inductor. From the simulation results, the class-E power amplifier with a finite DC-feed inductor shows superior reliability characteristics compared to power amplifier using an RF choke.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.99-102
• /
• 1999

In recent years, attempts have been made to greatly improve the display quality of active-matrix liquid crystal display devices, and many techniques have been proposed to solve such problems as gate signal delay, feed-through voltage and image sticking. To improve these problems which are caused by the fried-through voltage, we have evaluated new driving methods to reduce the fled-through voltage. Two level gate-pulse was used for the gate driving of the cst-on-common structure pixels. And two-gate line driving methods with the optimized gate signals were applied for the cst-on-gate structure pixels. These gate driving methods were better feed-through characteristics than conventional simple gate pulse. The evaluation of the suggested driving methods were performed by using a TFT-LCD array simulator PDAST which can simulate the gate, data and pixel voltages of a certain pixel at any time and at any location on a TFT array. The effect of the new driving method was effectively analyzed.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.5
• /
• pp.745-754
• /
• 2020

The dye marker Sudan Red 7B was tested as an effective and appropriate marking method for searching the territory of the termite, Reticulitermes speratus, in Korea. The sensitivity of termites to the dye marker was evaluated by measuring the feed consumption amount, survival rate, retention time, and transfer efficiency of R. speratus according to the concentration and feeding period of Sudan Red 7B. As the concentration conditions of dye marker increase, Sudan Red 7B remarkably reduced the feed consumption of the termites. The survival rate was not significantly different from that of the control group (more than 90%), except when feed containing 1% or 2% concentrations of the dye marker was given for five days. The duration of the marking effect persisted for seven days, even at a concentration of 2% dye marker in the feed. No dye transfer by trophallaxis occurred between termites marked with Sudan Red 7B and unmarked termites.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.5
• /
• pp.391-400
• /
• 2017

Italian ryegrass (IRG) is one of the fastest growing grasses available to farmers. It offers rapid establishment and starts growing early in the following spring and has fast regrowth after defoliation. So, IRG can be utilized as the dominant/single species of grass used in a farming system, or to play a role as a large producing pasture and sacrificial paddock. The objective of this study was to develop the use of unmanned aerial vehicle (UAV) for the evaluation of feed value of IRG. For this study, UAV imagery was taken on the Nonsan regions two times during the IRG growing season. We analyzed the relationships between $NDVI_{UAV}$ and feed value parameters such as fresh matter yield, dry matter yield, acid detergent fiber (ADF), neutral detergent fiber (NDF), total digestible nutrient (TDN) and crude protein at the season of harvest. Correlation analysis between $NDVI_{UAV}$ and feed value parameters of IRG revealed that $NDVI_{UAV}$ correlated well with crude protein (r = 0.745), and fresh matter yield (r = 0.655). According to the relationship, the variation of $NDVI_{UAV}$ was significant to interpret feed value parameters of IRG. Eight different regression models such as Linear, Logarithmic, Inverse, Quadratic, Cubic, Power, S, and Exponential model were used to estimate IRG feed value parameters. The S and exponential model provided more accurate results to predict fresh matter yield and crude protein than other models based on coefficient of determination, p- and F-value. The spatial distribution map of feed values in IRG plot was in strong agreement with the field measurements in terms of geographical variation and relative numerical values when $NDVI_{UAV}$ was applied to regression equation. These lead to the result that the characteristics of variations in feed value of IRG according to $NDVI_{UAV}$ were well reflected in the model.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.7
• /
• pp.961-966
• /
• 2008

Direct and maternal genetic parameters for production traits in 1,642 pigs and maternal genetic correlations among production (1,642 pigs) and feed efficiency (380 boars) traits were estimated in 7 generations of a Duroc population. Traits studied were daily gain (DG), intramuscular fat (IMF), loineye area (LEA), backfat thickness (BF), daily feed intake (FI), feed conversion ratio (FCR) and residual feed intake (RFI). The RFI was calculated as the difference between actual and predicted feed intake. The predicted feed intake was estimated by adjusting the initial test weight, DG and BF. Data for production traits were analyzed using four alternative animal models (including direct, direct+maternal permanent environmental, or direct+maternal genetic+maternal permanent environmental effects). Direct heritability estimates from the model including direct and all maternal effects were $0.41{\pm}0.04$ for DG, $0.27{\pm}0.04$ for IMF, $0.52{\pm}0.06$ for LEA and $0.64{\pm}0.04$ for BF. Estimated maternal heritabilities ranged from $0.04{\pm}0.04$ to $0.15{\pm}0.05$ for production traits. Antagonistic relationships were observed between direct and maternal genetic effects ($r_{am}$) for LEA (-0.21). Maternal genetic correlations of feed efficiency traits with FI ($r_g$ of FI with FCR and RFI were $0.73{\pm}0.06$ and $0.90{\pm}0.05$, respectively) and LEA (rg of LEA with FCR and RFI were $-0.48{\pm}0.05$ to $-0.61{\pm}0.05$, respectively) were favorable. The estimated moderate genetic correlations between direct and maternal genetic effects for IMF and LEA indicated that maternal effects has an important role in these traits, and should be accounted for in the genetic evaluation system.

• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1067-1074
• /
• 2023

Objective: Better feed efficiency can be achieved by selecting rabbit genotypes with lower residual feed intake (RFI) under high ambient temperatures. Methods: Two genotypes of rabbits (Jabali, Saudi local breed and imported, Spanish V-line) were used to derive RFI and to investigate the relationship between RFI and productive traits. In total, 250 animals (125 each) were housed in individual wire mesh cages in a semi-closed rabbitry. Growth performance, feed criteria, carcass evaluation, biochemical blood analysis, and immune responses were determined. Results: Superiority in growth performance, feed efficiency, carcass characteristics, and cellular immunity was recorded in the Jabali breed compared to the V-line genotype. According to regression analysis, a significant effect of daily body weight gain was found, upon computing the expected feed intake in both genotypes. Moreover, mid-body weight^0.75 had a significant effect only in the Jabali breed. Positive correlation coefficients between RFI and dry matter feed intake or feed conversion ratio were found. The same trend in this relationship between RFI and productive traits was observed in some cases for both genotypes. An opposite trend in correlations was observed in the studied genotypes for some traits. Conclusion: The results suggest that the relationship between RFI and productive traits must be taken into consideration in rabbit breeding programs under the prevailing environment. However, further studies are required to investigate the effect of rabbit genotype and environmental factors on computing RFI.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.345-348
• /
• 2018

The influence of various forms of Houttuynia cordata with fermented red koji as feed additives on the performance of duck livestock was evaluated through a field study. Two hundred and forty ducks (Pekins) aged 0-38 d were used. They were randomly assigned to four treatment groups (0%, 1% H. cordata powder with fermented red koji, 1% H. cordata pelleted with fermented red koji, and 1% H. cordata coated with fermented red koji) with four replicates (15 ducks per replication). Foreconomic evaluation, the data (a total of 240 duck) obtained from each treatment were applied to 10,000 ducks per treatment 38-d after the feeding trial. Overall, the results of economic evaluation were the highest in the treatment with 1% H. cordata coated with fermented red koji, followed by 1% H. cordatapelleted with fermented red koji, 1% H. cordatapowder with fermented red koji, and control. In conclusion, using 1% H. cordatawith fermented red koji as coating and pellet type duck diets might be of economic advantage for sustainable environmental management.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.