• Asian-Australasian Journal of Animal Sciences
• /
• 제8권4호
• /
• pp.311-316
• /
• 1995

Data on available feed resources, feeding practices and nutrient adequacy of rations under small farm conditions in Sri Lanka were obtained in a baseline survey involving 104 pig farms. The results showed that a wide range of non-conventional feedstuffs are used for pig feeding under typical small farm conditions and that dietary protein quality is a major factor limiting productivity. Following the survey, two on-farm trials were conducted to evaluate cheaper, alternative feeding strategies. In trial 1, a test diet was formulated using several non-conventional feedstuffs and compared with a commercial feed that is normally fed in the farms. In trial 2, the possibility of improving growth rates by amino acid supplementation was evaluated. The results demonstrated that feed costs can be considerably lowered through these packages. Some problems inherent to on-farm livestock trials are highlighted.

• 농업과학연구
• /
• 제37권1호
• /
• pp.143-149
• /
• 2010

This study analyzed the income of large scale honey bee farming of Korea. Using a questionnaire, 44 large scale honey bee farming farmhouseholds were surveyed. The average hive sizes are 258. The results are as follows. First, gross receipts of bee farming farmhouseholds are 50,342 thousand won, and it's components are honey 71%, bee selling and/or lent 26%. Second, working expenses are 23,778 thousand won that is 47% of gross receipts. Feed costs are 38.2%, material costs are 23.9%, hired labor costs are 11.0%, moving costs are 10.1%. Finally, receipts per hive are 195.1 thousand won, working expenses per hive are 23,778 thousand won, so income per hive is 103.0 thousand won.

• 한국수자원학회논문집
• /
• 제44권10호
• /
• pp.809-817
• /
• 2011

한국수자원공사에서 위탁 관리하고 있는 서남해안 도서지역 역삼투 해수담수화 시설 40여곳에 대한 비용 분석을 통하여 비용에 큰 영향을 미치는 요소를 찾아내고 담수화 비용 절감방안을 제시하였다. 시설에 공급되는 원수의 염도(TDS)는 담수로 취급될 수 있는 1,000mg/L 이하에서부터 해수수준인 3,000mg/L 이상까지 다양한 범위를 보이고 있다. 2005년부터 5년 동안의 비용분석 결과 유지보수비가 50.6%, 인건비가 36.9%, 그리고 에너지비가 7.8%의 순으로 나타났다. 본 연구에서는 일반적으로 잘 알려진 에너지 비용은 물론 담수화 비용의 가장 큰 비중을 차지하는 유지보수 비용도 원수의 TDS 농도에 직접적인 영향을 받고 있음을 밝혔다. 이는 원수의 TDS 농도가 담수화 비용의 60%에 달하는 부분에 영향을 끼치므로 담수화 비용 절감을 위해서는 저염도 원수 확보에 노력을 기울여야 한다는 것을 의미한다.

• 오토저널
• /
• 제14권6호
• /
• pp.113-126
• /
• 1992

Recently the multi-kind, small-amount manufacturing system has been replacing the mass manufacturing system, and domestic machining inustry also is eager to absorb the new technology because of its high productivity and cost reduction. The optimization of the cutting condition has been a vital problem in the machining industry, which would help increase the productivity and raise the international competitiveness. It is intended in this study to investigate the machining costs per unit time which is essential to the analysis of the optimal cutting condition, to computer the cutting speed that lead to the minimum machining costs and the maximum production to suggest the cutting speed range that enables efficient speed cutting, and to review the machining economy in relation to cutting depth and feed. Also considered are the optimal cutting speed and prodution rated in rrelation with feed. It is found that the minimum-cost cutting speed increases and the efficient cutting speed range is reduced as machining cost per unit time increases since the cutting speed for maximum production remains almost constant. The machining cost is also lowered and the production rate increases as the feed increases, and the feed should be selected to satisfy the required surface roughness. The machining cost and production rate are hardly affected by the cutting depth if the cutting speed stays below 100m/min, however, they are subject to change at larger cutting depth and the high-efficient speed range also is restricted. It can be established an adaptive optimal cutting conditions can be established in workshop by the auto-selection progam for optimal operation. It is expected that this method for choosing the optimal cutting conditions might contribute to the improvement of the productivity and reduced the cost. It is highly recommended to prepare the optimal cutting conditionthus obtained for future use in the programing of G-function of CNC machines. If proper programs that automatically select the optimal cutting conditions should be developed, it would be helpful to the works being done in the machine shops and would result in noticeable production raise and cost reduction.

• 한국초지조사료학회지
• /
• 제38권3호
• /
• pp.150-155
• /
• 2018

This study was conducted to determine grazing intensity of growing Korean native goats(Capra hircus coreanae) on mountainous pasture. It was carried out to obtain basic information for improvement of mountainous pasture management and establishing feeding system of Korean native goat. A total of 20 goats were grouped by feeding systems [A mountainous pasture grazing group (Concentrated feed of 1.5% body weight, treatment 1, T1, n=10) and a barn feeding group (TMR, treatment 2, T2), n=10] to conduct study from April to September. The average forage productivity of the mountain pasture was $500.9{\pm}61.41kg/ha$. The average dry matter intake in T1 was 0.64 and the calculated grazing intensity was 21 head/ha. In productivity, when the two treatments(T1, T2) were compared, the dry matter intake was about two to three times the difference. The average daily gain per day during the experiment was 63.3 in the mountain pasture and 120 g in barn feeding. When grazing, considering mountainous pasture productivity it is necessary to increase the productivity through proper feeding. The feed costs of black goats raised by grazing on the grassland in the same period showed an average 75% reduction compared to barn feeding. As a result of this study, it can be expected that a considerable reduction of feed costs can be expected in the breeding of Korean native black goat using the mountain pasture.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.666-672
• /
• 2000

Two experiments were conducted to determine the ileal digestibility of the amino acids contained in sunflower meal using the regression technique and then applying the values obtained, in a growth trial, using growing-finishing pigs. For the digestibility trial, four 20 kg crossbred ($Yorkshire{\times}Landrace{\times}Beijing$ Black) barrows were fitted with simple Tcannula in the terminal ileum. After recovery, the barrows were fed one of four experimental diets according to a $4{\times}4$ Latin Square design. The pigs were fed corn-soybean meal based diets supplemented with 0, 25, 50 or 75% sunflower meal. For the growth trial, 80 crossbred ($Yorkshire{\times}Landrace{\times}Beijing$ Black) growing pigs (21.5 kg) were fed corn-soybean meal diets supplemented with 0, 5, 10 or 15% sunflower meal. Five pens (2 gilts and 2 castrates) were assigned to each treatment. With the exception of arginine and valine, the digestibility coefficients for the indispensible amino acids declined as the level of sunflower meal in the diet increased. During both the growing (21.5-49.1 kg) and finishing (49.1-90.3 kg) periods and over the entire experiment (21.5-90.3 kg), average daily gain declined in a linear manner (p<0.05) with increasing amounts of sunflower meal. Feed intake was not significantly altered while feed conversion declined in a linear manner (p<0.05) during the grower period only. When the entire experimental period was taken into account, there would appear to be little penalty in either growth or feed conversion for including sunflower meal at levels up to 10% of the diet. Therefore, the price relationship between sunflower meal and other high-protein feedstuffs may provide an excellant opportunity for pork producers to use sunflower meal in order to reduce feed costs.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권1호
• /
• pp.66-74
• /
• 2008

Two experiments were conducted to assess the effect of replacing a conventional concentrate with mixed cassava (Manihot esculenta) foliage and legume (Phaseolus calcaratus) foliage. In Exp. 1, three rumen fistulated crossbred cows were used for in sacco rumen degradability studies. In vitro gas production was also studied. In Exp. 2, 11 crossbred F2 heifers (Red Sindhi$\times$Holstein Friesian), with initial live weight of $129{\pm}6kg$ and aged six months, were allocated in a Completely Randomized Design (CRD) to evaluate a mixture (ratio 3:1) of cassava and legume foliage (CA-LE feed) as a protein source compared to a traditional concentrate feed (Control) in diets based on fresh elephant grass (Pennisetum purpureum) and urea treated rice straw ad libitum. The Control feed was replaced by the CA-LE feed at levels of 0% (Control), 40% (CA-LE40), and 60% (CA-LE60) based on dry matter (DM). The in sacco degradation of CA-LE feed was higher than Control feed (p<0.05). After 48 h incubation the degradation of CA-LE feed and Control feed was 73% vs. 58% of DM and 83% vs. 65% of CP, respectively. The gas production of CA-LE feed was also significantly higher than of Control feed during the first 12 h of incubation. The results of the performance study (Exp. 2) showed that the level of CA-LE feed in the concentrate had no effect on total dry matter intake (p>0.05), but live weight gains (LWG) in CA-LE40 and CA-LE60 were significantly higher (551 and 609 g/d, respectively) than in the Control group (281 g/d). The intake of CP was higher (p<0.05) for the treatments CA-LE40 and CA-LE60 (556 and 590 g/d, respectively) compared to that of Control (458 g/d), while there was no significant difference in ME intake. The feed conversion ratio was 16.8, 9.0 and 7.9 kg DM/kg LWG in Control, CA-LE40 and CA-LE60, respectively. The feed cost of CA-LE40 and CA-LE60 corresponded to 43% and 35%, respectively, of the feed cost of Control feed. The best results were found when CA-LE feed replaced 60% of DM in Control feed and considerably decreased feed cost. It is concluded that feeding cassava foliage in combination with Phaseolus calcaratus legume as a protein supplement could be a potentially valuable strategy which leads to reduced feed costs and a more sustainable system in smallholder dairy production in Vietnam.

• 농업과학연구
• /
• 제43권5호
• /
• pp.761-768
• /
• 2016

Recently, swine production costs have increased due to increased feed cost, especially the price of corn and soybean meals. Soybean meal is traditionally an expensive ingredient, but the price of corn has dramatically increased because of increased biofuel production. This change has resulted in the swine industry looking for alternatives in order to reduce feed cost, resulting in decreased production costs. Thus, various alternatives have been used as feed ingredients to replace corn, soybean meal, or other expensive ingredients. One othercandidate may be palm kernel co-products that are a by-product of oil extraction from palm fruits. Palm kernel co-products have not been used in swine diets due to high fiber content and imbalanced amino acids compared with corn and soybean meal. However, recent studies showed that palm kernel co-products did not have any negative effects on growth performance of pigs when they replaced some proportions of corn and soybean meal. In addition, palm kernel co-products may provide some physiological properties to pigs by modifying gut microbiota and/or immunity of pigs, resulting in improvement of growth and health of pigs. Therefore, the value of palm kernel co-products were reviewed as one of the alternatives for corn, soybean meal, or other major ingredients in swine diets.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.605-613
• /
• 2023

The multi-axis combined machining technology has enabled combined machining, which was difficult. However, the reality is that manufacturing costs are rising due to expensive equipment and there is a shortage of machine operation engineers. The purpose of this research is to present the optimum cutting conditions for the surface roughness when processing the inner diameter of SUS440C, which is an egg material, using a CNC automatic lathe. As a result of measuring the surface roughness, dry machining was the best at R_a0.481㎛ at a spindle speed of 4,000rpm, a feed rate of 0.05rev/min, and a cutting depth of 0.3mm. In wet machining, the highest value was R_a0.317 at a spindle speed of 2,000 rpm, a feed rate of 0.05 rev/min, and a cutting depth of 0.2 mm. The lower the feed rate, the better surface roughness appears. It was found that the feed rate had more influence than the number of revolutions and depth of cut.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.89-93
• /
• 2002

A total of six crossbred barrows ($Duroc{\times}Landrace{\times}Large$ White, $44.17{\pm}1.94kg$ BW) were housed conducted to evaluate apparent fecal digestibilities of Brown Rice (BR) as an alternative energy source in growing pigs. Pigs were housed individually on metabolism crate on the basis of body weight. Four treatments contained: 1) 100% of corn-soybean meal (C100; Control diet), 2) 75% of corn-soybean meal diet plus 25% of corn meal (C25), 3) 100% of brown rice-soybean meal diet (BR100), 4) 75% of brown rice-soybean meal diet plus 25% of brown rice meal (BR25). Brown rice has an excellent gross energy and crude protein composition compared to corn. The BR used had 3,801 kcal of gross energy/kg, 8.0% crude protein, 2.6% of ether extract, 0.035% calcium and 0.35% total phosphorus. The best digestibilities of energy (87.75%), DM (81.71%) and CP (78.57%) were observed in BR 100 group and the worst were found in Corn 25 group. The nutrient digestibility was not significantly different in most nutrients. Through this experiment, BR appeared a good alternative energy source that can replace corn yellow to 100% in growing pigs. Therefore, the price relationship between corn and BR may provide an excellent opportunity for pork producers to use BR in order to reduce feed costs provided that diet has been balanced for digestible amino acids.