• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.157-163
• /
• 2012

Internet Data Centers (IDCs), which are essential facilities in the modern IT industry, typically have scores of MW of concentrated electric loads. The provision of an Uninterruptible Power Supply (UPS) is necessary for the power feed system of IDCs owing to the need for stable power. Thus, conventional IDC AC power feed systems have three cascaded power conversion stages, (AC-DC), (DC-AC), and (AC-DC), resulting in a very low conversion efficiency. In comparison, DC power feed systems require only a single power conversion stage (AC-DC) to supply AC main power to DC server loads, resulting in comparatively high conversion efficiency and reliability [4-11]. This paper compares the efficiencies of a 220V AC power feed system with those of a 300V DC power feed system under equal load conditions, as established by the Mok-Dong IDC of Korea Telecom Co. Ltd. (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is approximately 15% higher than that of the 220V AC power feed system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.1
• /
• pp.27-33
• /
• 2012

Internet Data Centers (IDC), as essential facilities for modern IT industry, typically have scores of MW of concentrated electric loads. Uninterruptible Power Supplies (UPS) are necessary for the power feed system of IDCs because of stable power requirement. Thus, conventional AC power feed systems of IDCs have three cascaded power conversion stages such as (AC-DC), (DC-AC), and (AC-DC), which results in very low conversion efficiency. On the contrary, DC power feed systems need just a single power conversion stage (AC-DC) supplying AC mains power to DC server loads, which gives comparatively high conversion efficiency and reliability. This paper compares the efficiencies between 220V AC power feed system and 300V DC power feed system on equal load conditions which were established in Mok-Dong IDC of Korea Telecom company (KT). Experimental results show that the total operation efficiency of the 300V DC power feed system is around 15% higher than that of the 220V AC power feed system.

• Journal of Aquaculture
• /
• v.18 no.2
• /
• pp.130-132
• /
• 2005

Genomics research has two ultimate applied goals: to Isolate and clone genes of economic importance for bio-technology and gene-assisted selection (GAS), and to locate and use markers for marker-assisted selection (MAS) in selective breeding programs. To this end, we have identified linked markers for feed conversion efficiency growth rate, and disease resistance to enteric septicemia of catfish (ESC). Three microsatellite markers Ip266, Ip384, and Ip607 were identified to be linked to feed conversion efficiency. Similarly one marker each was identified to be linked to growth rate (Ip607) and disease resistance to ESC (Ip477). Ip607 marker linked to both growth rate and feed conversion efficiency, indicating that the QTL for both growth rate and feed conversion efficiency may either be the same or located in the same chromosomal region in the catfish genome. On phenotypic evaluation, certain traits such as growth rate can be accurately evaluated by body weight evaluation while other traits such as disease resistance can be quite complex. The linked DNA markers will be highly useful for MAS programs and for directing further efforts of genomic mapping for important quantitative traits.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.192-195
• /
• 1998

Biomass conversion efficiencies (B.C.E) of six fish species viz, Catla catla, Labeo, rohita, Cirrhina mrigala, Hypophthalmicthys molitrix, Ctenopharyngodon idella and Cyprinus carpio cultured under artificial feed (T1), broiler manure (T2), buffalo manure (T3), N:P:K (25:25:0) (T4) and control pond (T5) have been determined for the period of one year. The overall biomass conversion efficiencies under the influence of T2, T3, and T4 were statistically similar. However, the best (0.40) efficiency was determined under feed supplement-ation (T1).

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.747-755
• /
• 2009

The feed resource for animals is a major cost determinant for profitability in livestock production enterprises, and thus any effort at improving the efficiency of feed use will help to reduce feed cost. Feed conversion ratio, expressed as feed inputs per unit output, is a traditional measure of efficiency that has significant phenotypic and genetic correlations with feed intake and growth traits. The use of ratio traits for genetic selection may cause problems associated with prediction of change in the component traits in future generations. Residual feed intake, a linear index, is a trait derived from the difference between actual feed intake and that predicted on the basis of the requirements for maintenance of body weight and production. Considerable genetic variation exists in residual feed intake for cattle and pigs, which should respond to selection. Phenotypic independence of phenotypic residual feed intake with body weight and weight gain can be obligatory. Genetic residual feed intake is genetically independent of its component traits (body weight and weight gain). Genetic correlations of residual feed intake with daily feed intake and feed conversion efficiency have been strong and positive in both cattle and pigs. Residual feed intake is favorably genetically correlated with eye muscle area and carcass weight in cattle and with eye muscle area and backfat in pigs. Selection to reduce residual feed intake (excessive intake of feed) will improve the efficiency of feed and most of the economically important carcass traits in cattle and pigs. Therefore, residual feed intake can be used to replace traditional feed conversion ratio as a selection criterion of feed efficiency in breeding programs. However, further studies are required on the variation of residual feed intake during different developmental stage of production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.377-381
• /
• 2002

The growth rate, feed conversion efficiency and carcass characteristics of nine native Malpura (M) and eight Awassi ${\times}$ Malpura half bred (AM) male lambs were compared under intensive feeding on 60:40 concentrate and roughage based composite feed. Weaning body weight was similar in the two genetic groups while finishing body weight, total body weight gain and average daily gain during the experiment were higher (p<0.01) in AM than M lambs. The feed conversion efficiency was lower in M than AM lambs with 15.7 and 19.8 per cent feed conversion efficiency, respectively, in the two genetic groups. The dressing yield in terms of preslaughter weight or empty live weight was however similar in the two genetic groups. The loin eye area was also greater (p<0.01) in AM than M lambs. The cutability was similar for the two groups amounting to 33.2, 13.3, 13.2, 23.3 and 16.6% of half carcass, respectively, for leg, loin, rack, neck and shoulder and breast and foreshank. On an average the separable lean, fat and KOH bone content of the half carcass were 48.3, 16.8 and 23.3% for native M and 54.1, 15.0 and 19.0% for AM lambs, respectively. It is concluded that growth rate and feed conversion efficiency were better in Awassi ${\times}$ Malpura half bred than native Malpura lambs while dressing yield and cutability of standard cuts were similar in the two genetic groups.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2005

Feed conversion efficiency contributes directly or indirectly on the cost benefit ratio of silkworm rearing and is considered to be an important physiological criterion for evaluating the superiority of silkworm breeds/hybrids. Food intake, assimilation and conversion of indigenous as well as exotic silkworm races are well studied by many researchers. In this review, an attempt has been made to consolidate works on feed conversion aspects of indigenous and exotic silkworm races. The paper also deals with the effect of various factors viz., nutritional, environmental and feeding on food assimilation and conversion parameters of mulberry silkworm.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.3
• /
• pp.333-337
• /
• 2001

This study investigated the effects of fermented product from Bacillus subtilis (FPBS) on feed conversion efficiency, fat accumulation and ammonia production in broiler chicks. Sixty female broilers (strain Chunky, 7-day old) were divided into four groups and raised in individual cages. One group was fed a commercial diet without supplementation of FPBS as the control and the other three groups were fed commercial diets containing FPBS, either 0.5, 1.0 or 2.0%, for 21 days from 7 to 28 days of age. Water and feed were given ad libitum. Feed conversion efficiency was significantly improved in chicks supplemented with 0.5 or 1.0% of FPBS as compared with the control (p<0.05). The activities of hepatic acetyl-CoA carboxylase and fatty acid synthetase, and contents of triglyceride and cholesterol in the liver were significantly decreased in treatment groups (p<0.05) as compared with the control group. FPBS had no effect on the concentration of plasma triglyceride, phospholipids and cholesterol. Feeding FPBS at 1 % or 2% levels reduced ammonia gas release (p<0.05). The inclusion of FPBS at 1 % level may be recommended both to improve production efficiency and to reduce air pollution caused by ammonia gas release. For production efficiency to reach maximal profit, the inclusion of FPBS at 0.5% level can be recommended. Feeding FPBS reduced fat accumulation in the liver.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.2
• /
• pp.213-216
• /
• 2002

Food consumption and conversion efficiency of new bivoltine hybrids (CSR2$\times$CSR4 and CSR2$\times$CSR5) were studied under restricted feeding levels (10, 20 and 30% less quantity of mulberry leaves). The data were compared with a control fed with standard quantum of feed as per the recommendation. The nutritional indices parameters i. e. ingests, digesta, approximate digestibility (%) and reference ratio were recorded higher in control batches compared to less feed batches while nutritional efficiency parameters i. e., ECI and ECD to cocoon and shell were recorded significantly higher in restricted feeding level batches. This increase is attributed due to the physiological adaptation under nutritional stress condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.5
• /
• pp.748-763
• /
• 2003

Anaerobic rumen microorganisms mainly bacteria, protozoa and fungi degrade ligno-cellulosic feeds consumed by the ruminants. The ruminants in developing countries are predominantly maintained on low grade roughage and grazing on degraded range land resulting in their poor nutrient utilization and productivity. Hence, manipulation of rumen fermentation was tried during last two decades to optimize ruminal fermentation for improving nutrient utilization and productivity of the animals. Modification of rumen microbial composition and their activity was attempted by using chemical additives those selectively effect rumen microbes, introduction of naturally occurring or genetically modified foreign microbes into the rumen and genetically manipulation of existing microbes in the rumen ecosystem. Accordingly, rumen protozoa were eliminated by defaunation for reducing ruminal methane production and increasing protein outflow in the intestine, resulting in improve growth and feed conversion efficiency of the animals. Further, Interspecies trans-inoculation of rumen microbes was also successfully used for annulment of dietary toxic factor. Additionally, probiotics of bacterial and yeast origin have been used in animal feeding to stabilize rumen fermentation, reduced incidence of diarrhoea and thus improving growth and feed conversion efficiency of young stalk. It is envisaged that genetic manipulation of rumen microorganisms has enormous research potential in developing countries. In view of feed resource availability more emphasis has to be given for manipulating rumen fermentation to increase cellulolytic activity for efficient utilization of low grade roughage.