• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1108-1111
• /
• 2009

Auto Pilot is the system which move automatically the vessel through locating operation mode to automatic after entering operating course using a electronic chart or plotter. And water jet is the a propulsion system that make a power to push the vessel through spouting the accelerated water which is absorbed by the hole in the bottom of vessel. The water jet receive the effect of the depth of water lowly, it's acceleration efficiency is higher under high speed and have an advantage on vibrating and floating sound, so it's demand is increasing as new propulsion system. However, the signal systems of auto pilot and water jet are different, we need the system to interface between each system. We designed the interface that efficiently digital feed back control embedded module between auto pilot and water jet system in this paper.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.29-41
• /
• 2008

This research was conducted to develop a technology transfer and farmer's extension of newly released technology of Bokto seeding method for crop and vegetable production based on the theory of Asian and Pacific Center for Transfer of Technology(APCTT). This technology has recently transferred to not only Korea but also other countries like North Korea, China, Japan, Taiwan, Russia and Africa(Cameroon, Sudan and South Africa) since 2005. It has known as a highly reduction of production cost in terms of labors, chemical fertilizer and pesticides as well as environmental friendly due to a deep and side banded placement of chemical fertilizer at basal application. In addition this technology was proven to a precision farming on sowing depth and mechanism of chemical application method and also highly resistant against disasters like typhoon, flooding, low temperature, drought and lodging due to silicate application. It has improved a constraints such as a poor seedling establishment, weed occurrence, lodging, low yield and poor grain and eating quality in the previous direct seeding methods but still have a problem in occurrence of weedy rice and ununiformed operation of wet or flooded soil condition. Also this technology has a limit in marketing and A/S system. Based on a theory of APCTT evaluation and analysis this technology may be more concentrated on establishment of a special cooperation team among researcher and scientists, extension workers, industry sections and governmental sectors in order to rapidly transfer this technology to farmer's field. Also there will be needed to operate a web site for this newly released technology to inform and exchange an idea, experiences and newly improved information. A feed back system might be operated in this technology as well to improve a technology under way on users' operation. Also user's manual will be internationally released and provided for farmer's instruction and training at field site.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.1
• /
• pp.142-148
• /
• 2016

The present study investigated the effects of back-fat thickness at d 107 of gestation and housing types during gestation on reproductive performance and behavior of sows. A total of 64 crossbred sows ($Landrace{\times}Yorkshire$) in their 3 to 4 parities were allotted to one of four treatments (n = 16) over two consecutive parities. During each parity, sows were assigned to two gestational housing types (stall or group housing) and two level of back-fat thickness (<20 or ${\geq}20$) at d 107 of gestation. Gestating sows were transferred from gestational crates to stalls or pens (group housing) 5 weeks before farrowing. All sows were moved to farrowing crates on d 109 of gestation. At weaning, back-fat thickness changes were lesser (p<0.05) in sows having back-fat thickness <20 mm than that of sows with ${\geq}20mm$ back-fat thickness at 107 d of gestation. Group housed sows had greater (p<0.05) feed intake and shorter (p<0.05) weaning-to-estrus interval than that of sows in stalls. At weaning, back-fat thickness changes were lesser (p<0.05) in group housed sows than that of sows in stalls. The number of piglets at weaning, growth rate and average daily gain were greater (p<0.05) in group housed sows than that of sows in stalls. During gestation, walking duration was more (p<0.05) in group housed sows. Group housed sows had lesser (p<0.05) farrowing duration and greater (p<0.05) eating time than that of sows in stalls. Result obtained in present study indicated that sows with ${\geq}20mm$ back-fat thickness at 107 days had better reproductive performance. Additionally, group housing of sows during last five week of gestation improved the performance and behavior and reproductive efficiency of sows.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.11
• /
• pp.1427-1435
• /
• 2010

The present study was conducted to examine the effect of a stair-stepped feed intake pattern on growth, feed efficiency, and meat quality of Hanwoo steers. Twenty-seven 11-month-old Hanwoo steers were randomly divided into three groups. The control group was fed according to the Korean steer feeding program, and the other two groups were fed according to an alternated feeding schedule of 3-2-4-2 months. During the first three months of the experiment, treatment group 1 (T1) and treatment group 2 (T2) were fed 20% and 30% less than the control group, respectively. For the following two months, the T1 group was fed 20% more than the control group while the T2 group was fed 20% less than the control group. In the third step, T1 and T2 groups were fed 20% and 10% less, respectively, than the control group for four months. In the last two months, T1 and T2 groups were fed 20% more than the control group. After the stair-step feeding trial, steers were fed concentrated feed ad libitum for five months. The altered feed intake pattern did not affect daily body weight gain. However, daily feed intake tended to decrease and growth efficiency tended to increase in the two treatment groups compared to the control group. Altered feed intake also affected blood metabolite levels. The serum glucose and BUN level of the T1 group increased in the first re-fed period compared to the T2 and control groups. The serum cholesterol level of the T2 group decreased in the first restricted-re-fed growth period compared to the T1 and control groups. The serum NEFA levels of the two treatment groups increased from the first restricted period compared to the controls. The serum insulin level of the T2 group increased in the last period compared to the T1 and control groups. Regarding meat yield index, the control group was significantly higher than the T2 group (p<0.05). Regarding meat yield grade, the carcass back fat thickness of the T2 group was significantly higher than the control group (p<0.05). In marbling score, the T1 group was the highest (4.9), followed by the control group (4.1) and the T2 group (4.0). These results indicate that using a stair-stepped growth pattern (T1) can contribute to improvements in growth efficiency and muscle marbling.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.71-81
• /
• 2000

For the construction of NATM tunnel, it is required a design based on the accurate soil condition from soil investigation. However, in practice, it often designs tunnels without fully understanding the condition. Especially, when soft soil comes up, or ground water breaks out suddenly on the construction, it needs to secure the stability of tunnel by appropriate reinforcing construction according to the results of measurements on field superlatively reflecting the faced situation. This report reviews the mostsuitable stability of tunnel in the construction of soft soil of tunnel by numerical analysis using FDM after re-evaluated the soil properties through back analysis using the results of measurements to simulate abruptly occurred deformation. And applying steel pipe grouting row by row on the wall and the low part of tunnel and also applying the construction method of temporary invert after excavation of the upper part of tunnel, the excavation of soft soil tunnel secured the structural stability of tunnel has been completed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.457-463
• /
• 2016

In this paper, a method of enhancing the bandwidth of a double-dipole quasi-Yagi antenna (DDQYA) using a modified integrated balun is presented. The modified integrated balun consists of a microstrip (MS) line inserted along the center of a coplanar strip (CPS) line and the end of the MS line is connected to the CPS line through a shorting pin at the feed point. The geometry of the modified integrated balun is adjusted to improve the bandwidth of the DDQYA. In addition, the performance of the proposed balun in a back-to-back configuration is compared with a conventional balun. The proposed antenna with the optimized modified integrated balun is fabricated on an FR4 substrate, and the experiment results show that the antenna has a frequency band of 1.56-3.04 GHz(64.4%) for a VSWR < 2, which shows enhanced bandwidth compared to the DDQYA with the conventional balun.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.4
• /
• pp.28-33
• /
• 2009

In 2008, the global photovoltaic(PV) market reached 5.6GW and the cumulative PV power installed totalled almost 15GW compared to 9GW in 2007. Due to a favourable feed-in-tariff, Korea emerged in 2008 as the 4th largest PV market worldwide. PV power installation rose 495.5 percent to 268MW in 2008 compare to 45MW in 2007. Building integrated photovoltaic(BIPV) has the potential to become a major source of renewable energy in the urban environment. BIPV has significant influenced on the reflection by rear materials such as white back sheet and the heat transfer through the building envelope because of the change of the thermal resistance by adding or replacing the building elements. In this study, to use as suitable building materials into environmentally friendly house like green home, characteristic analysis of BIPV module according to rear materials achieved. Electrical output of PV module with white back sheet is high about 10% compared to other pv module because of 83% reflectivity of white back sheet compared to 8.4% reflectivity of other PV modules with different rear materials(black back sheet and glass). In the result of outdoor experiment during a year, electrical output of four different PV module is decreased about 3.72%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.12
• /
• pp.1044-1052
• /
• 2016

In this paper, a cavity back slot antenna with a rotated rectangular patch is proposed. The proposed antenna consists of a ground plane with cavity structure, a microstrip feed line, and a rectangular patch with slot. With a dimension of $55mm{\times}40mm{\times}10mm$, the proposed antenna has the wide bandwidth due to the cavity structure. Measured 10 dB return loss bandwidth and fractional bandwidth of the proposed antenna is 5,030 MHz(3.02~8.05 GHz) and 90.9 % at the center frequency of 5.05 GHz. The proposed antenna is designed and simulated using ANSYS HFSS v.15.0.0. The designed antenna is fabricated and tested to validate its performances.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1083-1095
• /
• 2023

Recently, the demand for low-voltage, high-capacity ESS is rapidly increasing due to the revitalization of the e-mobility industry, which is mainly powered by electricity. In addition, the demand for portable power banks is rapidly increasing due to the revitalization of leisure industries such as camping and fishing. The ESS with this structure consists of a small number of series cells and many parallel cells, resulting in a system with a large rated current. Therefore, the number of power devices for cell balancing configured in series is small, but a balancing device with a large current capacity is required. Construction of a constant temperature device in such a low-voltage, high-current ESS is difficult due to economic issues. The demand for an active balancing system that can solve the passive balancing heating problem is rapidly increasing. In this paper, propose a power feedback fly-back topology that can solve the balancing heating problem. The characteristic of the proposed topology is that a series-connected voltage sharing voltage is used as the input of the flyback converter, and the converter output is connected to one transformer. In this structure, the converter output for cell voltage balancing shares magnetic flux through one high-frequency transformer, so the cell voltage connected to the converter automatically converges to the same voltage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.4
• /
• pp.503-510
• /
• 2014

The study was conducted to determine the effect of feeding diets containing Andrographis paniculata leaves (APL), whole Andrographis paniculata plant (APWP) and a control without Andrographis paniculata (AP0), on growth performance, carcass characteristics and meat yield of 24 intact Boer bucks. The results obtained indicated that inclusion of Andrographis paniculata significantly improved feed intake, weight gain, feed efficiency and live weight. The ratios of carcass to fat, lean to bone, lean to fat, and composition of meat were also improved. In addition, there were significant differences (p<0.05) between the dietary treatments in dressing percentage and chilling loss. Goats fed on AP0 (control) had significantly higher proportions of fat and bone, as well as thicker back fat than the supplemented animals (APL and APWP). Higher gut fill in animals fed Andrographis paniculata suggested slow rate of digestion, which could have improved utilization and absorption of nutrients by the animals. Goats fed Andrographis paniculata also produced higher meat yield and relatively lower fat contents (p<0.05).