• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.6
• /
• pp.538-543
• /
• 2006

A packed bed reactor (PBR) was fed with nitrate containing synthetic wastewater or effluent from a sequencing batch reactor used for nitrification. The C source introduced into the PBR consisted of volatile fatty acids (VFAs) produced from anaerobic acidogenesis of food wastes. When nitrate loading rates ranged from $0.50\;to\;1.01\;kg\;N/m^{3}{\cdot}d$, the PBR exhibited $100{\sim}98.8%\;NO_{3}^{-}-N$ removal efficiencies and nitrite concentrations in the effluent ranged from $0\;to\;0.6\;NO_{2}^{-}-N\;mg/L$. When the PBR was further investigated to determine nitrate removal activity along the bed height using a nitrate loading rate less than $1.01\;kg\;N/m^{3}{\cdot}d$, 100% nitrate removal efficiency was observed. Approximately 83.2% nitrate removal efficiency was observed in the lower 50% of the packed-bed height. When reactor performance at a C/N ratio of 4 and a C/N ratio of 5 was compared, the PBR showed better removal efficiency (96.5%) of nitrate and less nitrite concentration in the effluent at the C/N ratio of 5. VFAs were found to be a good alternative to methanol as a carbon source for denitrification of a municipal wastewater containing 40 mg-N/L.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.38-43
• /
• 1998

Application of pervaporative extraction of ethanol to simultaneous saccharification and fermentation(SSF) of cellulose was investigated. From batch experiments, optimum cellulose substrate and enzyme loadings were found to be 10% and 15 IFPU/g cellulose, respectively. The cellulose conversion was lowered in fed-batch system due to the ethanol accumulation. The activity of the yeast Saccharomyces uvarum used in this study was significantly reduced at ethanol concentrations above around 40 g/L. From pervaporation experiments using PDMS membrane, ethanol was efficiently separated at 38$^\circ C$ and 10 mmHg of a down stream pressure. The pervaporation unit with 240 cm$^2$ of surface area was combined into the SSF reactor. The continuous removal of ethanol by pervaporation during SSF resulted in an improved cellulose conversion. Within the scope of this experiment, ethanol yields in the pervaporative SSF and simple SSF were 68.3% and 56.6%, respectively. The permeate flux for SSF broth pervaporation was about one-half that for the pervaporation of aqueous ethanol solution. Accordingly, the development of a membrane with higher ethanol selectivity and flux will increase the feasibility of this technology.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.75-80
• /
• 2000

An improved method of refolding recombinant human proinsulin from E. coli was presented. It was based on a two-stage stirred tank reactor in which denatured proinsulin-s-sulfonate was mixed instantaneously with a reaction buffer in the first stage reactor, and then fed to the second stage reactor. The mixture was stirred further for a total of 30h in the second stage reactor. In this system, unfavorable effects present due to the increase in reaction volume and protein concentration for protein refolding, which becomes significant in a large-scale operation, were avoided. Refolding yields of over 80% was obtained for achieving reaction volume of upto 50 l at protein concentration of 1 mg/ml. The optimum urea concentration was 1M. Refolding yield at the 1-1 reaction volume and protein concentration of 0.5mg/ml was increased about 2.5-fold, compared to that in a batch reactor. By increasing protein concentration in a two-stage refolding reaction, the cost for insulin production could be reduced, therefore, making this process economical.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.676-679
• /
• 2003

Long time over 6 month was required to form granuler sludge, which is critically necessary for UASB reactor. By feeding both high molecular cationic polymer and anionic silica sol to conventional digestion sludge, granular sludge was obtained within 5 minutes. Succession adaptation was performed for granular sludge for 30 days. $80{\sim}90%$ COD removal efficiency was shown with granular sludge, which was comparable with that of typical UASB granular sludge.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.77-80
• /
• 2000

Various analytical methods such as electron microscopy, quinone analysis, and 16S rDNA sequencing studies were used to investigate the microbial communities and to identify the microorganisms responsible for enhanced biological phosphorus removal (EBPR) in an anaerobic/aerobic sequencing batch reactor (SBR) fed with acetate. Electron photomicrographs showed that oval-shaped microorganisms of about $0.7\;{\sim}\;1\;{\mu}m$ in diameter dominated the microbial sludge. These microorganisms contained polyphosphate granules and glycogen inclusions, which suggests that they are a kind of phosphorus accumulating organism. Quinone and 16S rRNA sequence analyses showed that the members of Proteobacteria beta subclass were the most abundant species, which were affiliated with the Rhodocyclus-likes group. Phylogenetic analysis revealed that the two dominating clones of the beta subclass were most distantly related to Propionivibrio dicarboxylicus DSM 5885 and Rhodocyclus tenuis DSM 109 with about 95% and 96% sequence similarity, respectively. Therefore, it was concluded that the oval-shaped organisms related to the Rhodocyclus-likes group are likely to be responsible for biological phosphorus removal in SBR operation supplied with acetate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1654-1660
• /
• 2009

Two different cutting-oils from H and B companies which are sold as an eco-friendly cutting-oils were selected and the biodegradability of these commercially available cutting-oils was evaluated by the sequencing batch reactor (SBR) processes. The cutting-oil wastes ($H_1$) pre-treated by coagulation/flocculation was used as an influent to SBR. When the F/M ratio was operated 0.04 to 0.08kgCOD/kgMLSS d, removals of $BOD_5$and $COD_{Cr}$were above 97% and 91%, respectively. T-N and T-P removals were above 76% and 81%, respectively. If the diluted cutting-oil wastes ($B_1$) was used as an influent of the SBR, $COD_{Cr}$removals were above 77% at the F/M ratio of 0.01-0.02kgCOD/kgMLSS d. After the cutting-oil wastes was treated by coagulation/ flocculation ($B_2$), $COD_{Cr}$removals was above 85%. If the pre-treated cutting-oil wastes were mixed with a synthetic wastewater ($B_3$) and fed into the SBR in order to mimic the real wastewater treatment plant situation, $BOD_5$and $COD_{Cr}$removals were above 97%, 91%, respectively. T-N and T-P removals were above 79% and 76%. The ratio between $BOD_5$and $COD_{Cr}$, ($COD_{Cr}$-$BOD_5$)/$COD_{Cr}$, indicating the biodegradability of effluent of the SBR, was calculated to 85% and 61%. This means that significant amounts of non-readily-biodegradable organic compounds in the effluent of $H_1$, $B_3$are still present.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.241-245
• /
• 1989

A carriersupported mycelial growth of Sreptomyces erythreus was applied to erythromycin fermentation sistem using celite as a support material. Hyphal growth through the pore matrices of the materials showed anchorages and provided a stable biofilm growth. When the phospate concentration was limited to 0.8g corn steep liquor/L(corresponding to 40mg KH2PO4/L), the specific production rate of erythromycin was increased from 557$\mu$g/g-cell.hr under unlimited condition to 2, 898 $\mu$g/g-cell.hr. A fluidized-bed bioreactor was operated for erythromycin production by a repeated fed-batch mode. The control of free mycelial concentration and the extension of production phase were considered important to maintain the reactor productivity at a desired level. The erythromycin production under phosphate-limited condition could be maintained for at least 600hrs.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.43-52
• /
• 1989

A synthetic wastewater composed of powdered baby food and inorganic nutrients was treated by five 3.6L anaerobic reactors in order to test the relationship between solids retention time (SRT) and media surface ratio, and the removal efficiencies of organic substrate. Of the five reactors, four were semi-continuously fed stirred-tank reactors and one continuously-stirred batch reactor. The influent was 7430mg/L in COD, 7120 mg/L $BOD_L$ and 6350mg/L in $BOD_5$, respectively. Operating temperature was $35{\pm}1^{\circ}C$ and pH in the range 6.9 to 7.2. In this experimental study it was found that a linear relationship existed, within the experiment range, between SRT and media surface ratio, and that SRT and removal efficiency increased with increasing media surface ratio. The substrate removal efficiencies were 82.7 to $88.2\%$ in COD, 82.9 to $88.4\%$ in $BOD_L$ and 83.3 to $88.7\%$ in $BOD_5$, respectively.

• Journal of Soil and Groundwater Environment
• /
• v.24 no.5
• /
• pp.42-54
• /
• 2019

Biodegradation of an explosive compound, glyceryl trinitrate (GTN), was studied with a denitrifying microbial culture grown in a sequencing batch reactor and a GTN acclimated denitrifying culture. The GTN acclimated culture, which were fed on GTN for 1 month, degraded GTN regioselectively via denitration on C1 position as compared to C2 position denitration by denitrifying culture that has never been exposed to GTN. Accumulation of two isomeric glyceryl dinitrates (GDNs) in both culture medium suggests that GDN denitration is the rate-limiting step in GTN biodegradation. The first order GTN degradation rate normalized to cell concentration of the acclimated culture was calculated to be 0.045 (${\pm}0.002$) L/g-hr. Increasing concentration of electron acceptor(nitrate) resulted in discouraged GTN degradation. According to microbial community analysis, prolonged GTN exposure resulted in 25% increase in the genus level of the GTN acclimated culture with the disappearance of two dominating denitrifying microbial species of Methyloversatilis universalis and Hyphomicrobium zavarzinii in the denitrifying culture.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.681-686
• /
• 2010

Two different MFC designs were evaluated in batch mode: single compartment combined membrane-electrodes (SCME) design and twin-compartment brush-type anode electrodes (TBE) design (single chamber with two air cathodes and brush anodes at each side of the reactor). In SCME MFC, carbon anode and cathode electrodes were assembled with a proton exchange membrane (PEM). TBE MFC was consisted of brush-type anode and carbon cloth cathode electrodes without the PEM. A brush-type anode was fabricated with carbon fibers and was placed close to the cathode electrode to reduce the internal resistance. Substrates used in this study were glucose, leachate from cattle manure, or sucrose at different concentrations with phosphate buffer solution (PBS) of 200 mM to increase the conductivity thereby reduce the internal resistance. Hydrogen generating bacteria (HGB) were only inoculated in TBE MFC. The peak power densities ($P_{peak}$) produced from the SCME systems fed with glucose and leachate were 18.8 and $28.7mW/m^2$ at external loads of 1000 ohms, respectively. And the $P_{peak}$ produced from TBE MFC were 40.1 and $18.3mW/m^2$ at sucrose concentration of 5 g/L and external loads of 470 ohms, with a mediator (2-hydroxy-1, 4-naphthoquinone) and without the mediator, respectively. The maximum power density ($P_{max}$) produced from mediator present TBE MFC was $115.3mW/m^2$ at 47 ohms of an external resistor.