• Journal of the Korean Solar Energy Society
• /
• v.29 no.1
• /
• pp.58-63
• /
• 2009

In this paper, the power loss due to PV module mismatch in PV string is analyzed and a mismatch compensation method is proposed to improve the efficiency of PV system. The analysis of mismatch loss using PV model simulation reveals that the mismatch module may decrease the total efficiency because the MPPT function of power conditioner make the PV system operate at the local maximum point. The mismatch loss can be severe if the maximum power point current of mismatch module is less than that of string. The proposed compensation method which is simply implemented with a buck type converter shows the possibility to remove the mismatch loss. The effectiveness of the analysis and compensation method is verified by a prototype experiment.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.9
• /
• pp.1741-1749
• /
• 2009

It is very important to maintain the balanced output voltage waveforms under the unbalanced DC-link voltages in the four-switch three-phase inverter(FSTPI). In this paper, the improvement of output voltage waveforms is proposed with the aid of DC-link voltage ripple estimation. The proposed method can be implemented without the additional voltage sensor. The proposed method applied to the permanent magnet synchronous motor (PMSM) is simulated and experimented in order to verify its feasibility.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.73-78
• /
• 2011

We developed a noise reduction algorithm for the measurement accuracy improvement of a fiber-optic distributed temperaure sensor system. The denoising technique is based on the wavelet transform. The proposed algorithm was applied to a FBG sensor output with the Gaussian line-fitting algorithm to minimize the output noise which originated from the intensity noise of the laser light source and the instability of signal porcessing. We confirmed the feasibility of the denoising algorithm by comparing the measurement results with those obtained with the Gaussian line-fitting algorithm only.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.209-219
• /
• 2017

Logistics companies want to be competitive companies in fierce logistics market and are worrying about securing of differentiated competitiveness for it. The standards judging if logistics industry maintains the competitiveness are based on the satisfaction of users due to the well-established service system that can response not only economic feasibility of logistics costs such as transportation costs, storage costs, unloading charges, information costs, etc. but also diversity and upgradability of logistics needs. Therefore, this study focuses on seeking of service quality improvements with VBSD(Value Based Service Design) model focusing on customer value factors based on Kano model and QFD based service design approach from angles of customer value improvement and service costs reduction.

• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.887-896
• /
• 2002

Based on SPICE (Software Process Improvement and Capability dEtermination) evaluation model, SPIRE (Software Process Improvement in Regions of Europe) is developed and published as a process improvement model for small and medium size organizations. However, practical selection guidelines or mapping rules between business goals and software processes do not exist within SPIRE. This research aims to construct an objective reference mapping table between business goals and software processes, and to propose a process selection method using the mapping table. The mapping table is constructed by the convergence of domestic software process experts' opinions using Delphi techniques. In the suggested process selection method, target processes are selected using the intuition of project participants or project managers as well as the reference mapping table. The feasibility of the proposed selection method has been reviewed by applying to two small software companies. Using the reference mapping table, we could select key processes which were passed over by project managers.

• Korean System Dynamics Review
• /
• v.10 no.1
• /
• pp.77-95
• /
• 2009

The ever-increasing government budget constraints have led to a continued decline in the increase rate for defense spending, and the government's 5-year National Fiscal Management Plan has served to reinforce the verification and validation procedures for the Force Improvement Programs (FIP) budget requirements and performance. Additionally, as large programs are controlled in accordance with the Total Program Cost Management Guidelines, timely and credible feasibility study and performance measurement need to be conducted. Due to these internal and external circumstances, needs have surged for feasibility and economic effectiveness study for big ticket projects in the FIP sector, with an increasing number of studies conducted by external research institutes. However, questions have been raised regarding the credibility and thoroughness of the program analyses performed by these research institutes due to various restrictions. This paper analyzes and identifies the structural limitations and problems using a systems thinking approach, and examines the systemic characteristics of the program analysis system. It also presents policy intervention recommendations based on the theory of systems thinking, a method to regularize and reinforce the program analysis system. Policy interventions recommended to ensure alignment of the external studies to the clear analysis objectives and resolve the bottlenecks in the external analysis include training those in charge of external study commissioning for a short term intervention, and increasing the number of research institutes and consulting agencies utilizing analysis and evaluation experts who transition to the private sector from the military for a long term intervention. additionally presented are strategies and policy alternatives to best utilize these policy interventions. They will contribute to the stable funding of Force Improvement Programs and efficient utilization of defense budget.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.6
• /
• pp.81-88
• /
• 2010

This study compared the feasibility of utilizing a wood bioenergy system over a conventional central heating and cooling system and a cogeneration system in an apartment complex. The performance of the three systems were compared in the following areas: energy consumption, environmental impact(output of CO2, CH4, and N2O), and life cycle cost. The results showed that energy performance of the wood bioenergy system was similar to the conventional central system (just a 1% improvement) but the cogeneration system showed a 12% reduction in energy consumption compared to the conventional system. In terms of environmental impact, the bioenergy system reduced pollutants by 50% while the cogeneration system reduced pollutants by 30% compared to the conventional system. Life cycle cost analysis indicated bioenergy and cogeneration to have an 8% and 19% improvement over the conventional system. The findings of the study suggest that it is both economically and environmentally beneficial to use a wood bioenergy system in place of a conventional central heating and cooling system in apartment complexes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.199-206
• /
• 2021

This paper describes the feasibility and reliability verification of installing a protective structure to protect attack periscopes. The attack periscope is the critical equipment of a submarine to enable the user to monitor surface and air activity, collect navigational data, and detect and identify targets. The attack periscope provides target information acquired through TV, IR camera, and laser range finder to the combat system. In the product improvement program, the upper part of the masts was exposed to the outside of the sail because the existing attack periscope was replaced with a new one. On the other hand, the head sensor can be damaged by floating objects, such as fishing nets, during sea navigation. Therefore, the installation of a protective structure for an attack periscope improved the equipment operation performance. The feasibility and reliability of the installation of the protective structure were verified by examining the influence of URN.

• Journal of Plant Biotechnology
• /
• v.44 no.2
• /
• pp.107-114
• /
• 2017

Implementation of crop improvement programs relies on genetic diversity. To overcome the limited occurrence of natural mutations, researchers and breeders applied diverse methods, ranging from conventional crossing to classical bio-technologies. Earlier generations of knockout and gain-of-function technologies often result in incomplete gene disruption or random insertions of transgenes into plant genomes. The newly developed editing tool, CRISPR/Cas9 system, not only provides a powerful platform to efficiently modify target traits, but also broadens the scope and prospects of genome editing. Customized Cas9/guide RNA (gRNA) systems suitable for efficient genomic modification of mammalian cells or plants have been reported. Following successful demonstration of this technology in mammalian cells, CRISPR/Cas9 was successfully adapted in plants, and accumulating evidence of its feasibility has been reported in model plants and major crops. Recently, a modified version of CRISPR/Cas9 with added novel functions has been developed that enables programmable direct irreversible conversion of a target DNA base. In this review, we summarized the milestone applications of CRISPR/Cas9 in plants with a focus on major crops. We also present the implications of an improved version of this technology in the current plant breeding programs.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.2
• /
• pp.119-123
• /
• 1998

The feasibility of using combined treatments of electric field and chemical mutagen N-methyl-N'-nitro-N-nitroso-guanidine (NTG) for the strain improvement of Saccharomyces sp. in ethanol production was examined. The treatment of electric field alone resulted in no effect on the lethality of yeast cells under the conditions of this study. However, when the electric field was applied together to the treatment of yeast cells with NTG, the electric field increased the lethal effect and auxotrophic mutation rate of NTG. The combined treatment of electric field and NTG also increased the chances of. obtaining superior yeast strains for the ethanol production from tapioca. A higher number of improved clones was obtained by the combined treatments of electric field and NTG than by the NTG treatment alone. The best clone, NF 30-9, which was also obtained by the combined treatment, produced $11.07\%$ (w/v) ethanol from tapioca slurry containing 25% (w/v) reducing sugar while the parental strain produced 9.77% (w/v).