• Title/Summary/Keyword: Feasibility improvement

Search Result 689, Processing Time 0.023 seconds

A Study on Improvement of Feasibility Evaluation for Public Projects (공공사업 타당성 평가의 개선 방안에 관한 연구)

  • Park, Seung-Jun
    • Journal of the Korea Convergence Society
    • /
    • v.8 no.2
    • /
    • pp.163-168
    • /
    • 2017
  • The feasibility evaluation of public projects has been carried out mainly in the economic analysis. However, items of political, technological and balanced regional development aspects are further evaluated by applying analytic hierarchy process, This paper suggests to analyzes preliminary feasibility study of construction and research & development project during the past three years and to verify correlation between B/C ratio and AHP weight. The result shows that the correlation between cost benefit ratio and the weight of the hierarchy is 0.744 in construction projects and 0.899 in research & development project. Namely, AHP weight be under the control of B/C ratio and is devoted to its role against expectation. Therefore it must be sufficiently discussed in various designs of studies to maximize the effects of AHP analysis.

Improvement of the Design Space Feasibility Using the Response Surface and Kriging Method (반응면 기법과 크리깅 기법을 이용한 설계공간의 타당성 향상)

  • Ku, Yo-Cheon;Jeon, Yong-Heu;Kim, Yu-Shin;Lee, Dong-Ho
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.33 no.2
    • /
    • pp.32-38
    • /
    • 2005
  • In this research, a procedure to improve the feasibility of design space is proposed by an approximation model. The Chebyshev Inequality is used as the criterion of modification of design space. This procedure is applied to the aero-elastic transonic wing design problem and the feasibility of the design space is greatly improved. Also the optimization results are improved by appling this procedure. That is, the probability to satisfy all imposed constraints is increased and the better design points are included in design space after this procedure. And the use of both a second-order response surface model and the Kriging model is investigated and compared in accuracy, efficiency, and robustness as approximation models in this procedure for different sampling methods. As a result, the second-order response surface model is more appropriate for our application than the Kriging model, because it is linear enough to be fitted well by the response surface model.

Development and feasibility test of sit-to-stand transfer assistive device

  • Ha, SinHo;Jeong, SeYeon;Hong, SoungKyun;Choi, Wonjae;Lee, Kwangkook;Park, Donghwan;Son, SangJun;Shin, HyeonHui;Lee, GyuChang
    • Journal of Korean Physical Therapy Science
    • /
    • v.29 no.1
    • /
    • pp.41-46
    • /
    • 2022
  • Background: The purpose of this study was to develop a sit-to-stand transfer assistive device, and to conduct a feasibility test. Design: A technical note. Methods and results: In this study, we developed a sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. The sit-to-stand transfer assistive device allows the user to transfer the weight from a sitting position to a standing position while shifting the weight forward by grabbing and pulling a support stand. Ten healthy adults participated in the feasibility test of the device. Each participant used the developed sit-to-stand transfer assistive device and investigated supplementation through a brief interview. As a result of the feasibility test, the opinion was that the device could assist the sit-to-stand transfer to some extent. There were opinions that it needed a function to adjust the height of the knee protective plate in the sitting position according to the user's physical characteristics. Because of the inconvenience of operating the lock device for fixing the position and adjusting inclination, there was an opinion that the improvement for a locking device is needed. There were opinions that it would be better to reduce the size of the device due to its inconvenience of portability. Conclusion: In this study, we developed the sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. In addition, it is considered that the upgrade of the device is necessary for the future since there are supplementary opinions on some points.

A Study on the Feasibility of the Improvement of Traffic Congestion : Focusing on Small and Medium-Sized Cities in Chuncheong Province (중소도시 교통혼잡도로 적용범위에 관한 연구 : 충청권 중심으로)

  • Kwon, Hyun Joong;Oh, Ju Taek
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.18 no.3
    • /
    • pp.34-45
    • /
    • 2019
  • Based on the analysis of congestion conditions in small cities with a population of less than 500,000 in Chungcheong Province, this study conducted a feasibility study on the scope of congestion improvement projects. Further, traffic congestion management standards were further established by analyzing LOS as well as the speed of traffic presented by congestion criteria in the existing Project. According to the analysis according to the congestion management standard LOS suggested in this study, Asan city has the most major number of highways where LOS E occurs for more than 3 hours, followed by Sejong City and Gongju City. In addition, when comparing the ratio of the busy main roads according to the frequency of LOS E by city size, it was analyzed that the ratio and extension of the busy highways relative to the overall extension of the large Chungcheong area are similar to the ratio in small cities in the Chungcheong region. Therefore, traffic congestion occurred in small cities and the feasibility of the improvement project was revealed.

Effects of elastic band orthosis (aider) on balance and gait in chronic stroke patients

  • Daher, Noha;Lee, Seungjun;Yang, You Jin
    • Physical Therapy Rehabilitation Science
    • /
    • v.2 no.2
    • /
    • pp.81-86
    • /
    • 2013
  • Objective: The objective of this study was to investigate the feasibility and effects of balance training using a newly developed elastic band orthosis (aider) for improvement of mobility and balance in chronic stroke patients. Design: Cross-sectional study. Methods: Ten patients with chronic hemiplegia participated in this study. There were six males and four females; two patients had right hemiplegia and eight had left hemiplegia. This study investigated the effect of the elastic band orthosis on balance and gait ability compared with bare foot condition. Gait parameters were measured using the opto-gait system for analysis of the spatial and temporal parameters of walking in stroke patients. In addition, balance ability in stroke patients was evaluated using the Timed Up and Go (TUG) and Berg Balance Scale (BBS). Results: This study investigated the effect of the elastic band orthosis on balance compared with bare foot condition. The TUG and BBS showed significant improvement with use of the elastic band orthosis (p<0.05). Use of the Elastic band orthosis resulted in significantly improved velocity, cadence, less-affected step length, less-affected stride length, and less-affected single limb support in stroke patients (p<0.05). Conclusions: We demonstrated a significant improvement in dynamic balance and gait ability in chronic stroke patients using the elastic band orthosis. This orthosis may aid in prevention of spastic foot drop, leading to improvement of walking ability.

A study of the improvement of the national technical qualification practical evaluation method for National Competency Standards in the seed and horticulture industry

  • Hyun-Ho, Jang;Taek-Keun, Oh;Jwakyung, Sung
    • Korean Journal of Agricultural Science
    • /
    • v.48 no.4
    • /
    • pp.729-738
    • /
    • 2021
  • The purpose of this study was to suggest an improvement plan ultimately to develop practical evaluation methods for national technical qualifications in the field of seeds and horticulture based on the National Competency Standards. Through this, national technical qualifications can be strengthened in terms of professionalism in the seeds and horticulture field. In order to conduct this study, the national technical qualification currently in use was matched to certain competency units and competency unit elements of National Competency Standards. We then visited an industrial site to understand the practical factors related to the technical, facility and equipment aspects of the seeds and horticulture industrial field, after which a practical evaluation exam was developed. Also, for a feasibility study, a pilot test assessment was conducted for students majoring in seeds and horticulture, with a survey also conducted with field experts and an advisory committee consisting of experts in seeds and horticulture. Based on the results, by suggesting an improvement plan for a practical evaluation method leading to better national technical qualifications in the field of seeds and horticulture, it was shown to be possible to improve knowledge, technical, and literacy aspects. This can lead to the training of outstanding technical professionals. Ultimately, the results here are expected to contribute to the improvement of the seeds and horticulture industry.

Evaluation of Ground Improvement on Sands at Yongjong Island Geotechnical Experimental Site (영종도 지반공학 야외시험장에서의 사질토지반 개량효과 평가)

  • 김동수;박형춘;김영웅;김수일
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 1999.03a
    • /
    • pp.439-446
    • /
    • 1999
  • In situ experimental studies were Performed at Yongjong Island Geotechnical Experimental Site to evaluate the ground densification on sand deposited. Standard penetration test, cone penetration test, and SASW test were performed and soil profiles and quality of ground improvements were evaluated. The feasibility of applying SASW method were verified by comparing test results. The evaluation technique of in-situ density using SASW and resonant column tests was proposed, and the reliability of proposed method was verified by performing case studies.

  • PDF

Evaluation and Optimization of Power Electronic Converters using Advanced Computer Aided Engineering Techniques

  • Oza, Ritesh;Emadi, Ali
    • Journal of Power Electronics
    • /
    • v.3 no.2
    • /
    • pp.69-80
    • /
    • 2003
  • Computer aided engineering (CAE) is a systematic approach to develop a better product/application with maximum possible options and minimum transition time. This paper presents a comprehensive feasibility analysis of various CAE techniques for evaluation and optimization of power electronic converters and systems. Different CAE methods for analysis, design, and performance improvement are classified. In addition, their advantages compared to the conventional workbench experimental methods are explained in detail and through examples.

Cepstral Analysis of the Ultrasonic Signal from the liver tissue (간 조직 초음파 신호의 cepstrum 분석)

  • Kim, Jong-Won;Kwark, Cheol-Eun;Seo, Bo-Suk;Min, Byoun-Goo
    • Proceedings of the KIEE Conference
    • /
    • 1987.07b
    • /
    • pp.1247-1251
    • /
    • 1987
  • Cepstral analysis was performed on the ultrasonic echo signal from the tissue to achieve improvement on the estmation of the attenuation coefficient. In this paper, the feasibility of the acquiring the structural information of the tissue was also included by same method with band pass lifter.

  • PDF

Improved Viewing Quality of 3-D Images in Computational Integral Imaging Reconstruction Based on Lenslet Array Model

  • Shin, Dong-Hak;Lee, Byoung-Ho;Kim, Eun-Soo
    • ETRI Journal
    • /
    • v.28 no.4
    • /
    • pp.521-524
    • /
    • 2006
  • In this letter, we propose a novel computational integral imaging reconstruction technique based on a lenslet array model. The proposed technique provides improvement of viewing images by extracting multiple pixels from elemental images according to ray tracing based on the lenslet array model. To show the feasibility of the proposed technique, we analyze it according to ray optics and present the experimental results.

  • PDF