• Resources Recycling
• /
• v.25 no.2
• /
• pp.49-59
• /
• 2016

Steel slag is being recycled into industrial by-products for civil generated inevitably in the seasonal course, road and cement raw materials. However, the field of recycling most of the bottom portion is concentrated in the areas that are required to take advantage of the situation in various fields taking advantage of the steel slag. But various studies to take advantage of the steel slag as aggregate for concrete made for limiting slag was a situation that most of the studies are incomplete research on the suitability of as aggregate for concrete practical relates to an expandable suppressed. In this study, the separation of the slag aggregate according to the production methods to assess the feasibility aggregate for concrete aggregates, including through Steel making slag, a total of seven kinds of steel slag aggregate. Studies show that ordinary concrete, steel slag aggregate for aggregate and on the equally to take advantage of grading, chloride content standards such as to what is lacking, although appropriate aggregate of concrete include the deployment of only in special sectors through the combination was assessed to have a very high.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.112-117
• /
• 2017

Interest in the development of renewable energy sources has been increasing over the past 10 years and the west coast of Korea is one of the most favorable regions for tidal power. Barrage type tidal power is representative of the experience of installation and operation of such power sources for long periods. However, future projects for barrage type energy sources are either delayed or closed due to their environmental impact. For this reason, we applied a new tidal power technology with minimized environmental impact to a candidate area in the west coast and then analyzed its feasibility. The new tidal power technology is called Dynamic Tidal Power (DTP). Because its verification is impossible both in the laboratory and field, a numerical model is used for the evaluation of DTP. This new technology produces tidal power by means of the phase difference caused by diffraction on both sides of a dike built tens of km away from the coast. Because DTP is theoretically able to almost double the tidal range, it is expected to be applicable to even a small tidal area. Unlike the barrage type, it has the advantage of reducing the environmental impact by not enclosing the sea water. The west coast of Korea is close to the metropolitan area and has a high tidal range and, thus, it is thought to be a suitable candidate for tidal power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.458-465
• /
• 2020

Technological advances in artificial intelligence are affecting many industries, such as telecommunications, logistics, security, and healthcare, and research and development related to economic, efficiency, linkage with commercial technologies are the current focus. Predicting the changes in the future battlefield environment and ways of conducting war from a strategic point of view, as well as designing/planning the direction of military development for a leading response is not only a basic element to prepare for comprehensive future threats but also an indispensable factor that can produce an optimal effect over a limited budget/time. From this perspective, this study was conducted as part of a technology-driven plan to discover potential future technologies with high potential for use in the defense field and apply them to R&D. In this study, based on research data collected in a defense future technology investigation, the future new technology that requires further research was predicted by considering the redundancy with existing defense research projects and the feasibility of technology. In addition, an empirical study was conducted to verify the significance between the future new defense technology and the evaluation indicators in the AI field.

• Journal of Korean Society of Transportation
• /
• v.25 no.4
• /
• pp.57-66
• /
• 2007

According to the rapid economic growth and the escalation of recreational tourism activities due to the change of job and working patterns, currently various traffic problems often occur in tourist areas. As tourist traffic, contrary to general traffic, is not regional but rather from outside the area of interest, it is hard to grasp the traffic situation surrounding the tourist area. Furthermore, since the traffic is concentrated during a limited tourist season, it is difficult to examine and solve the problem. In this study, in order to test the feasibility of introducing a traffic transfer system to reduce congestion in tourist areas, the authors considered the differences in traffic congestion between typical and tourist seasons and designed a willingness to pay model. The willingness to pay amount for a shuttle bus fare is assumed as 1,430 Won and 1,650 Won is assumed for a transfer parking charge. These amounts were slightly above the current bus fare in the study area, but many people thought that the introduction of a traffic transfer system would help to relieve the traffic congestion approaching the tourist area and to develop tourism resources. As the willingness to pay appeared high from the persons used in this study, it was indirectly confirmed that the introduction of a traffic transfer system would be a step in the right direction.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.439-445
• /
• 2020

The purpose of this study was to investigate the feasibility of stent placement and the evaluation of tissue hyperplasia caused by bare metallic stent placement in a mouse colon model. In a pilot study, C57BL/6 mouse were used to verify diameter of colon. Mean diameter size was 4.05 mm. Twenty C57BL/6 mice were divided into two groups to assess differing stent diameters (Group A, 5 mm diameter; Group B. Group B, 4 mm diameter). Follow-up, 1-week fluoroscopic imaging, 4-week endoscopic imaging were obtained. Mice were sacrificed 4-week after stent placement. Microscopic findings were evaluated. Stent placement was technically successful except one mouse in Group A. Data from the mouse was omitted. During follow-up, five mice in Group A died within 7 days after stent placement, and one stent in Group B was migrated into the rectum. The incidence of stent-related complication was 60% and 10% between group A and Group B, respectively. Gross and Endoscopic findings showed tissue hyperplasia through the mesh, and all the stents had become incorporated into the wall of the colon. Microscopic findings were no statistically significant difference. colonic stent placement was technically feasible, and stent-induced tissue hyperplasia was evident in a mouse model. With stent large size, there was the highest incidence of colon perforation.

• Journal of Hospice and Palliative Care
• /
• v.19 no.2
• /
• pp.109-118
• /
• 2016

The purpose of this study was to evaluate Korean advance directives (K-AD) by examining the degree of adults' acceptance and reliability of the directive itself. Methods: Survey was performed with 181 adults aged 20 or older who were recruited from three regions. A questionnaire used to examine the participants' acceptance of their K-AD in terms of visual analogue scale score of complexity, difficulty, necessity, satisfaction, recommendation. Then, a retest was carried out by asking participants to write up a K-AD again to confirm the reliability of the directives. Results: On a scale of 100, the average acceptance score was 70 or above, which represents rather high level of acceptance in all five categories. The test-retest reliability kappa values ranged from 0.592 to 0.950, and the conformity degree was moderate or high. Regarding K-AD components such as values, treatment preference, proxy appointment, differences among age groups were observed in each component. Conclusion: The results of this study suggest that K-AD is a feasible instrument to analyze its acceptability and reliability for adult population. K-AD could be utilized to help people make their own decision on their end-of-life care. Further studies are needed to confirm this study results and promote widespread use of K-AD.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.421-428
• /
• 2009

In Korea, the change of river flux due to seasons change is so considerable because of the mountainous terrain with the sharp slope and leaned rainfall. This unfavorable natural condition and the difficulties in precise grasping of the river status made the water resource management difficult so that the necessity of the precise river management has been continuously increased. In this study, a precise river-region DEM using the latest equipments of ALS and MBES is constructed. After acquiring DEM from each senor on the river region, a single DEM was generated by combining them. Also, the field inspection was carried out in the overlapped region of ALS and MBES in order to verify the quality of DEM. The verification of DEM was carried out by comparison between TINs obtained from the combined result of ALS and MBES and the surveying result from total station at more than 10 points in the selected two test areas. As a result, NO.1-area's RMSE of 0.322m and 0.113m are obtained for NO. 1 and NO. 2 areas, respectively. The result of this study shows the feasibility of DEM construction for river region using ALS and MBES as seen in the case of NO. 2 area. At the same time, it was appeared that a better method on the data fusion should be developed as seen in the result of NO. 1 area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.4
• /
• pp.247-254
• /
• 2012

Vitrification technology has been widely applied as one of effective processing methods for wastes generated in nuclear power plants. The advantage of vitrifying for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. Recently, a filter using on HVAC(Heating Ventilating & Air Conditioning System) is composed with media (glass fiber) and separator (aluminum film) has been studied the proper treatment technology for meeting the waste disposal requirement. Present paper is a feasibility study for the filter vitrification that developing of the glass compositions for filter melting and melting test for physicochemical characteristic evaluation. The aluminum metal of film type is preparing with 0.5 cm size for proper mixing with glass frit, glass fiber is also preparing with 1 cm size within crucible. The glass compositions should be developed considering molten glass are related with wastes reduction. Glass compositions obtained from developing on glass formulation are mainly composed of $SiO_2$ and $B_2O_3$ for aluminum metal. A variety of factors obtained from the glass formulation and melting test are reviewed, which is feeding rate and glass characteristics of final products such as durability for implementing the wastes disposal requirement.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.399-406
• /
• 2016

Near-infrared radiation (NIR) is non-ionizing, non-invasive, and deep tissue penetration in biological material, thereby increasing research interests as a medical imaging technique in the world. However, the use of current near-infrared medical image is extremely limited in Korea (ROK) since it is not well known among radiologic technologists and radiological researchers. Therefore to strengthen the knowledge for NIR medical imaging is necessary so as to prepare a qualified radiological professionals to serve medical images in high-quality on the clinical sites. In this study, an overview of the features and principles of NIR imaging was demonstrated. The latest research topics and worldwide research trends were introduced for radiologic technologist to reinforce their technical skills. In particular, wound care and diabetic foot which have high feasibility for clinical translation were introduced in order to contribute to accelerating NIR research for developing the field of radiological science.

• The Journal of Engineering Geology
• /
• v.15 no.1
• /
• pp.29-39
• /
• 2005

For detecting a ground contamination survey, soil sampling method have been used a drilling or coring technique in general. However these methods are very difficult to systematically real-time monitoring of variation of contamination degree in field. ]'n this research frequency Domain Reflectometry (FDR) system was suggested and carried out to experimental approaches for determination of oil contamination on surface and underground. Experimental method using FDR method was discussed with feasibility of measurement in the laboratory column test. It is determined to degree of oil contamination due to response of dielectric constant re-lated with volumetric water content(θ/sub w/) and volumetric oil content( θ/sub al/ ) of saturated and unsaturated soil media. And physical properties such as effective porosity and oil residual ratio of saturated soil media were also measured through real-time monitoring works using installed FDR measurement sensors, which are defected characteristics of oil movement in the saturated soil media under the soil column tests. In the results of these experiments, a range of effective porosity was estimated to about 0.35 compared with initial porosity 0.40 of manufactured saturated soil media, which is also calculated to about 87.5% to the ratio of initial porosity to effective porosity. Finally oil residual ratio which is compared with volumetric water content and volumetric oil content was calculated about 62.5%.