• 제목/요약/키워드: Feasibility evaluation

검색결과 1,427건 처리시간 0.025초

고효율 전동기를 다중이용시설 환기설비에 도입하기 위한 LCCA 및 LCA 분석 (LCCA and LCA to Evaluate Feasibility for Introducing High-Efficiency Motors into Air Ventilation Systems of Public Facilities)

  • 전준용;최수호;권태환;최혜미;김주형;김재준
    • 한국건설관리학회논문집
    • /
    • 제16권4호
    • /
    • pp.41-49
    • /
    • 2015
  • 다중이용시설의 환기부문 에너지소비량이 전체 에너지소비에서 차지하는 비중은 약40%로서 상당히 크다. 환기설비분야의 에너지절약방안으로는 주동력원이자 주요에너지소비원인 전동기를 고효율 제품으로 교체하거나 인버터를 이용한 가변운전을 통하여 에너지를 절감시키는 방안이 있다. 그러나 이런 방안들을 도입하기 위해서는 기존설비보다 높은 초기투자비가 필요하므로 장기적인 관점에서의 경제성평가가 요구된다. 경제성평가 방법으로 생애주기동안 지출되는 모든 비용을 예측하는 LCCA(Life Cycle Cost Analysis)가 적절하지만 LCCA는 분석내용이 단순 비용절감측면에 치중되어 있어, 환경영향을 고려하지 못하는 한계가 있다. 환경영향을 분석하기 위한 방법으로 LCA(Life Cycle Assessment)있지만 이는 주로 건축물에만 사용되어왔고 또한 환경적인 측면만 치중하여 경제적은 측면을 고려하지 못하는 한계가 있다. 이에 본 연구에서는 LCCA 및 LCA를 이용해 경제적 측면 및 환경적 영향을 종합적으로 분석하여 다중이용시설 환기설비에 고효율 전동기 도입의 타당성 검토를 진행하고자 한다.

Degradation of Fat, Oil, and Grease (FOGs) by Lipase-Producing Bacterium Pseudomonas sp. Strain D2D3

  • Shon, Ho-Kyong;Tian, Dan;Kwon, Dae-Young;Jin, Chang-Suk;Lee, Tae-Jong;Chung, Wook-Jin
    • Journal of Microbiology and Biotechnology
    • /
    • 제12권4호
    • /
    • pp.583-591
    • /
    • 2002
  • Biodegradation of fat, oil, and grease (FOGs) plays an Important role in wastewater management and water pollution control. However, many industrial food-processing and food restaurants generate FOG-containing waste waters for which there Is no acceptable technology for their pretreatment. To solve these problems, this study evaluated the feasibility of effective FOG-degrading microorganisms on the biodegradation of olive oil and FOG-containing wastewater. Twenty-two strains capable of degrading FOGs were isolated from five FOG-contaminated sites for the evaluation of their FOG degradation capabilities. Among twenty-two strains tested, the lipase-producing Pseudomonas sp. strain D2D3 was selected for actual FOG wastewater treatment. Its biodegradability was performed at 3$0^{\circ}C$ and pH 8. The extent of FOG removal efficiency was varied for each FOG tested, being the highest for olive oil and animal fat (94.5% and 94.4%), and the lowest for safflower oil (62%). The addition of organic nitrogen sources such as yeast extract, soytone, and peptone enhanced the removal efficiency of FOGs, but the addition of the inorganic nitrogen nutrients such as $NH_4$Cl and $(NH_4)_2SO_4$ did not increase. The $KH_2PO_4$ sources in 0.25% to 0.5% concentrations showed more than 90% degradability. As a result, the main pathway for the oxidation of fatty acids results in the removal of two carbon atoms as acetyl-CoA with each reaction sequence: $\beta$-oxidation. Its lipase activity showed 38.5 U/g DCW using the optimal media after 9 h. Real wastewater and FOGs were used for determining the removal efficiency by using Pseudomonas sp. strain D2D3 bioadditive. The degradation by Pseudomonas sp. strain D2D3 was 41% higher than that of the naturally occurring bacteria. This result indicated that the use of isolated Pseudomonas sp. strain D2D3 in a bioaugmentating grease trap or other processes might possibly be sufficient to acclimate biological processes for degrading FOGs.

DETERMINATION OF SUGARS AND ORGANIC ACIDS IN ORAGE JUICES USING NEAR INFRARED DIFFUSE REFLECTANCE SPECTROSCOPY

  • Tewari, Jagdish;Mehrotra, Ranajana;Gupta, Alka;Varma, S.P.
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1522-1522
    • /
    • 2001
  • Beverages based on fruit juices are among the most popular commercially available drinks. There is an ever-increasing demand for these juices in the market. Orange juice is one of the most common as well as most favorite flavor. The fruit processing industries have a tremendous responsibility of quality control. For quality evaluation estimation of various components of the juice is necessary. Sucrose, glucose, fructose, citric acid and malic acid are the prime components of orange juice. Little information is available on analysis of orange juice. However, conventional and general wet chemistry procedures are currently being used which are no longer desired by the industry owing to the time involved, labor input and harmful chemicals required for each analysis. Need to replace these techniques with new, highly specific and automated sophisticated techniques viz. HPLC and spectroscopy has been realized since long time. Potential of Near Infrared Spectroscopy in quantitative analysis of different components of food samples has also been well established. A rapid, non-destructive and accurate technique based on Near Infrared Spectroscopy for determination of sugars and organic acids in orange juice will be highly useful. The current study is an investigation into the potential of Near Infrared Diffuse Reflectance Spectroscopy for rapid quantitative analysis of sucrose, glucose, fructose citric acid and malic acid in orange juice. All the Near Infrared measurements were peformed on a dispersive NIR spectrophotometer (ELICO 153) in diffuse reflectance mode. The spectral region from 1100 to 2500nm has been explored. The calibration has been performed on synthetic samples that are mixtures of sucrose, glucose, fructose, citric acid and malic acid in different concentration ranges typically encountered real orange juice. These synthetic samples are therefore considered to be representatives of natural juices. All the Near Infrared spectra of synthetic samples were subjected to mathematical analysis using Partial Least Square (PLS) algorithm. After the validation, calibration was applied to commercially available real samples and freshly squeezed natural juice samples. The actual concentrations were compared with those predicted from calibration curve. A good correlation is obtained between actual and predicted values as indicated by correlation coefficient ($R^2$) value, which is close to unity, showing the feasibility of the technique.

  • PDF

방사선사 실기시험제도 도입의 타당성 연구 (A Study on the Feasibility of a National Practical Examination in the Radiologic Technologist)

  • 손순룡;김태형;민정환;한동균;안성민
    • 한국산학기술학회논문지
    • /
    • 제12권5호
    • /
    • pp.2149-2162
    • /
    • 2011
  • 현행 실기시험의 형태가 실기능력 평가'라는 제 기능을 해내지 못함으로써 방사선사 면허시험에 합격하여도 임상적응(training) 과정을 이수해야 하는 모순이 발생되고 있다. 본 연구는 이러한 단점을 개선하기 위하여 현행 방사선사 실기시험제도 도입이 타당한지, 개선점은 무엇인지를 분석하여 가장 합리적인 개선 방안을 도출하고자 하였다. 연구대상은 임상에 근무 중인 방사선사 634명과 방사선(학)과 교수 56명을 대상으로 하였으며, 주요 선진국의 방사선사 실기시험의 실태를 조사하여 비교 분석하였다. 연구결과, 방사선선사 실기시험은 선진국과 국내 여건상 차이가 있어 임상실습으로 대체가 어려우며, 실기시험제도 도입이 필연적인 것으로 나타났다. 그러나 현행 실기시험 방식은 실기능력을 평가할 수 있는 시험 형태가 아니므로 객관적 임상능력 시험(OSCE; objective structured clinical examination)의 형태로 전환이 필수적이라는 결론을 얻었다. 향후 새로운 방사선사 실기시험 제도의 유형별 모델 제시 및 실행 방안에 관한 심도 있는 연구가 필요할 것으로 사료된다.

SPT 업홀기법을 이용한 지반의 2차원 전단파 속도 분포 도출 (Evaluation of near surface Vs distribution by using SPT uphole method)

  • 김동수;방은석;김종태
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2005년도 제7회 특별심포지움 논문집
    • /
    • pp.93-116
    • /
    • 2005
  • 기존 1차원 SPT 업홀 기법의 개선을 통하여 지반의 2차원적인 전단파 속도 분포를 경제적으로 도출하고자 하였다. 다수의 감지기를 사용하여 SPT 업홀 시험을 수행하고 시추공-지표면 조합의 주시 토모그래피 역산을 수행하게 되면 시추공 주변 지반에 대해 삼각형 형태의 전단파 속도 분포를 도출할 수 있다. 이러한 SPT 업홀 토모그래피 기법의 중요한 요소로는 정확한 전단파 성분의 도달시간 정보 획득 및 검증된 토모그래피 역산 프로그램의 적용이라 할 수 있다. SPT 업홀 기법에 대한 유한요소 수치해석을 통하여 수직 수평 입자 움직임의 크기합을 활용하여 도달시간 정보를 산출하는 것이 객관적이며 가장 정확한 결과를 주는 것으로 나타났다. 그리고 다양한 지반 모델에 대해 가상의 SPT 업홀 기법 수행을 통해 산출된 이론적 도달시간 정보로 토모그래피 역산 프로그램인 GeoTomCG를 사용하여 2차원 속도부포를 도출하여 봄으로써 GeoTomCG 프로그램의 신뢰성에 대해 검증하였다. 최종적으로 상향 및 하향으로 경사진 지반 모델에 대한 SPT 업홀 수치해석 모델링을 통해 지표면에서의 속도 시간 이력곡선을 획득하였고 도달시간 정보 획득 및 토모그래피 기법을 수행하여 그 결과를 수치모델 입력값과 비교해 봄으로써 SPT 업홀 기법의 2차원 적용 가능성을 확인하였다. 마지막으로 김제 지역의 풍하토 지반에서 SPT 업홀 시험을 수행하여 획득한 도달시간 정보를 이용하여 토모그래피 기법을 수행, 그 결과를 SPT-N값 등의 시추 자료와 비교하여 SPT 업홀 토모그래피 기법의 현장 적용성을 확인하였다.

  • PDF

노출 모델의 화평법 적용성: ECETOC TRA와 Stoffenmanager Tier 1 노출 모델을 활용한 벤젠의 작업자 노출 평가 (Occupational Exposure Assessment for Benzene Using Exposure Models (ECETOC TRA and Stoffenmanager) and Applicability Evaluation of Exposure Models in K-REACH)

  • 문준식;옥정원;정욱현;나진성;김기태
    • 한국환경보건학회지
    • /
    • 제44권5호
    • /
    • pp.460-467
    • /
    • 2018
  • Objectives: The objectives of this study are to estimate the inhalation exposure level of benzene for workers using Tier 1 exposure models ECETOC TRA (European Center for Ecotoxicology and Toxicology of Chemicals Target Risk Assessment) and Stoffenmanager, and to investigate their reliability for exposure assessment in K-REACH. Methods: Two exposure scenarios, 'manufacture of benzene' and 'use as solvents,' were developed for assessment of workers' exposure to benzene. The Process Category (PROC) for ECETOC TRA was collected from the European Chemical Agency (ECHA) registration dossier, and the Activity for Stoffenmanager was converted from PROC using translation of exposure models (TREXMO). The information related to exposure, such as working duration, Respiratory Protective Equipment (RPE), Local Exhaust Ventilation (LEV), and Risk Management Measure (RMM) were classified into high, medium, and low exposure conditions. The risk was determined by the ratio of the estimated exposure and occupational exposure limits of benzene. Results: Under high exposure conditions, the worker exposure level calculated from all PROCs and Activities exceeded the risk level, with the exception of PROC 1 and Activity 1. In the medium exposure condition, PROC 8a, 8b, and 9 and Activity 3, 7, and 8 all exceeded the risk, whereas in the low condition, all PROCs and Activities were determined to be safe. As a result, action corresponding with the low exposure condition is required to reduce the risk of exposure among workers in workplaces where benzene is manufactured or used as a solvent. In addition, the predicted exposure levels derived from the exposure models were lower than measured levels. The exposure levels estimated from Stoffenmanager were more conservative than those from ECETOC TRA. Conclusions: This study demonstrates the feasibility of exposure models for exposure assessment through the example of occupational inhalation exposure assessment for benzene. For more active utilization of exposure models in K-REACH, the exact application of collected information and accurate interpretation of obtained results are necessary.

다세대 기술 이동경로(Migration path)의 정의 및 종류에 대한 연구: 반도체 기술의 고객 및 공급자 이동경로 사례 (A Study on Definition and Types of Migration Path of Multiple Generation Technology: Case of Customers' and Suppliers' Migration Paths in Semiconductor Technology)

  • 박창현
    • 한국산학기술학회논문지
    • /
    • 제20권11호
    • /
    • pp.181-188
    • /
    • 2019
  • 새로운 기술의 대체 현상에 의해 발생하는 다세대 기술의 이동경로는 기술의 대체 현상을 이해하는데 중요하며, 궁극적으로 기술혁신의 과정을 이해하는데 기여가능하다. 본 연구에서는 다세대 기술의 대체 과정에서 발생하는 이동경로의 개념을 정의하고, 다세대 기술의 이동경로의 종류에 대한 모형을 다차원 기반(액터, 세대, 시간)으로 개발하였다. 문헌리뷰 및 다차원 기반 이동경로의 궤적 추적을 통해 다세대 기술의 이동경로의 정의 및 종류에 대한 모형을 제시하였고, 도출한 모형의 정합성을 반도체 산업 사례를 바탕으로 검증하였다. 다세대 기술의 공급자들의 이동경로는 3가지 이동경로(전환경로, 뜀뛰기경로, 신규진입경로)로 모형화가 가능하였고, 고객들의 이동경로는 4가지 이동경로(전환경로, 뜀뛰기경로, 신규진입경로 및 확산경로)로 모형화가 가능하였다. 본 연구를 통해 도출한 이동경로의 정의 및 종류에 대한 모형은 다세대 기술의 대체 현상을 통한 이동경로를 이해하는데 유용할 것이고, 반도체 산업 외에도 다양한 산업군에서 다양한 유형의 액터들에 대해서도 적용 가능한 것이다. 또한 실무적으로도 공급자와 고객은 다세대 기술의 대체 현상을 이해하여 경쟁자 대비 기술전략을 수립하는데 유용할 것이다.

지능형 방범 실증지구 경제적 가치평가 (Economic Value Estimation of Intelligent Crime-Zero Testbed)

  • 최우철;나준엽
    • 한국산학기술학회논문지
    • /
    • 제20권11호
    • /
    • pp.436-445
    • /
    • 2019
  • 본 연구는 방범분야와 같은 비시장재에 대한 가상시장을 구축하여 사람들의 만족감 및 선호의 정도를 계량화하는데 가장 효과적인 가상평가법(CVM: Contingent Valuation Method, 이하 CVM)을 이용하여 지능형 방범 실증지구에 대한 경제적 가치를 계량적으로 평가하였다. 가설적 편의를 최소화하고 실제적 상황을 피설문자에게 인지시키기 위해, 연구단에서 진행 중인 지능형 방범 기술 및 솔루션을 활용하여 실제 지역인 안양시 인덕원지구를 대상으로 분석하였다. 이를 통해 방범관련 공공사업에 대한 타당성을 분석할 수 있는 체계적인 기반을 제공하고자 하였다. 분석 결과 지능형 방범 실증지구의 안양시민 1인당 지불의사금액(WTP: Willingness To Pay, 이하 WTP)는 7,160원으로 추정되었다. WTP를 가구 수에 적용하여 경제가치를 추정한 결과, 테스트베드가 속한 관양2동 지역은 연 6.6억원, 안양시 전역으로 확대하면 연 514억원의 높은 경제적 가치를 갖는 것으로 분석되었다. 본 연구는 국내 최초로 방범 분야 실증지구를 대상으로 경제적 가치를 분석하였으며, 실제 적용이 가능한 지능형 방범 기술 및 솔루션, 실증지구를 활용하여 미래지향적 서비스모델을 제시한 점에서 의의를 가진다. 향후 지능형 방범 실증지구의 경제적 가치분석이 심층 연구되어 지능형 방범 사업의 지자체 확산 및 정책적 지원이 활발해지기를 기대한다.

지방어항개발의 투자결정요인 분석 - 충청남도 어항 중심으로 - (A Study on Decisions on Investment Factors in the Development of Local Fishing Harbors)

  • 이광남;정진호;최재욱
    • Ocean and Polar Research
    • /
    • 제33권4호
    • /
    • pp.473-483
    • /
    • 2011
  • In the recent WTO/DDA negotiations, discussions are progressing to forbid fishery subsidies which have negative effect on the natural environment and the fishery resources and to lower or to eliminate the tariff/non-tariff barriers that distort trade liberalization. As a result, linking to the weak structural environment of Korea's fishing villages; such a scheme has jeopardized the livelihood of fishermen who settle down in local fishing harbors. Against this backdrop, the government is attempting to positively respond to changes in the fishing environment in a number of different ways: promotion of fishing tourism, fishing harbor reinforcement in function, developing fishing villages, and harbors. With respect to investment by priority in fishing harbor development, it is very important to appropriately select investment targets based on objective criteria. A small number of harbors are chosen and investment plans by harbor are systematically devised, economic feasibility and the effects of investment are analyzed and reviewed in relation to each target harbor. This paper is designed to review and assess objective evaluation methods and the degree of importance for the designation of target harbors, dealing with local harbors in Chung Nam Do as a model. Each local government has tried to reorganize existing harbors and develop new harbors, considering a fall in the number of fishing vessels and the expansion of maritime leisure activities. In order to overcome the limit of existing harbors in function, to raise the income of fishermen, and to activate tourism, they have shifted their focus from simple functions such as vessel evacuation and anchoring to harbor beautification, which can work as a basis for fishing tourism. This paper points out that the AHP analysis method for prioritizing local harbors in Chung Nam Do should help to be chosen target harbors in other cities and provinces. Each local government has attempted to reorganize existing harbors and to develop new harbors, taking into consideration the decline in the number of fishing vessels and the expansion of maritime leisure activities. In order to overcome the limited number of functional harbors, to raise the income of fishermen, and to boost tourism, they have shifted their focus from simple functions, such as vessel evacuation and anchoring, to harbor beautification, which can work as a basis for fishing tourism. This paper shows that the AHP analysis method for prioritizing local harbors in Chungcheongnam-do could aid in the effective selection of target harbors in other cities and provinces.

고수압 해저지반 수리특성 조사용 일체형 메인 프레임과 공내 측정장치 개발 (Development of Integrated Type Main Frame and Downhole Sonde Apparatus for Hydraulic Packer Testing in Seabed Rock under High Water Pressure)

  • 배성호;김장순;전석원;김학수
    • 터널과지하공간
    • /
    • 제28권3호
    • /
    • pp.258-276
    • /
    • 2018
  • 정확하고 정량적인 현지 암반 수리특성 정보들은 고수압 조건 굴착 공동 주변의 수리 지질학적 거동에 대한 신뢰성 있는 평가에 필요한 핵심 인자들 중의 하나이다. 상부의 해수가 무한 수원으로 작용하는 해저지반 내 터널이나 암반 구조물 설계에서 계획 구조물의 규모와 작용 수압이 커질수록 수리특성 정보의 중요성은 크게 증가된다. 본 연구에서는 기존 수압시험 시스템의 부적절한 구성이나 부정확한 자료 획득과 관련된 제반 문제점들의 개선을 통해 고수압 해저지반에 최적화된 일체형 메인 프레임과 30 bar 급 완전방수구조 공내측정장치를 독자적으로 개발하였다. 수리특성 조사 시스템을 구성하는 개별 시험장치들을 단일 프레임에 통합함으로써 협소하고 위험요소가 많은 해상 시추용 플랫폼에서도 안전하고 효율적으로 시험을 수행할 수가 있게 되었다. 또한 유압유 이중 조절장치를 고안하여 공내 순 주입압력 기준 $2.0kgf/cm^2$ 이하 간격으로 정밀한 단계적 가압과 압력 유지가 가능하도록 하였다. 개발 장치들의 시스템 성능과 작동 안정성을 실증적으로 확인하기 위해 연구 시험공 2개소에서 현장 적용성 시험을 완료하였으며 제주 현무암 분포 지역 내 시험공 1개소에서 대표요소체적 규모 수리특성 시험을 성공적으로 수행하였다. 본 논문에서는 개발 장치들의 주요 특성들과 다양한 실내 및 현장 성능시험에서 획득된 주요 결과들을 간단히 소개하였다.