• 한국지진공학회논문집
• /
• 제2권1호
• /
• pp.35-46
• /
• 1998

대부분의 손상도 추정법들을 부재의 손상을 해당부재의 평균적인 강성감소로 표현하였다. 본 연구에서는 보다 실제적인 손상도를 추정하기 위하여, 접합부의 손상을 도입하였다. 접합부의 모형화를 위하여 보의 양단에 회전스프링을 추가하였으며, 접합부 손상을 접합부 강성의 감소로 정의하였다. 접합부의 손상도를 계측된 모드벡터를 바탕으로하여, 신경망기법을 추정하였다. 효율적인 훈련패턴을 만들기 위하여 Latin Hypercube Sampling 기법을 도입하였으며, 국부영역에서의 손상도추정을 위하여 부구조법을 도입하였다. 제안된 기법의 효율성을 검증하기 위하여 10층 프레임구조물에 대한 수치해석결과를 이용하였다. 예제해석을 통하여 추정결과가 상당히 정확함을 확인하여, 실제 적용 가능한 방법임을 알수 있었다.

• 조명전기설비학회논문지
• /
• 제16권2호
• /
• pp.81-89
• /
• 2002

전지전력저장시스템은 부하 평준화, 순동 예비력 확보, 주파수·전압 조정, 신뢰도 향상 및 송변전 설비의 투자지연효과 등의 많은 장점을 가진다. 전지전력저장시스템의 보급을 확산하기 위해서는 수용가 입장에서 본 경제성 평가가 중요하다. 본 논문에서는 기존의 모델을 보완, 개선한 전지전력저장시스템의 경제성 평가 모델을 제안하였다. 제안된 경제성 평가 모델을 한국전력의 부하 조사로부터 얻어진 전형적 수용가인 경공업, 상업, 가정용 수용가에 적용하여 순현재가치, 수익률 등의 경제 척도를 통해 각 수용가의 경제성 타당성을 분석하였다. 이의 결과를 보면 전지전력저장시스템은 특정 수용가 형태(가정 수용가)에 유리하다는 것을 알 수 있었으며, 정부 및 에너지 에이전트는 이의 보급 확산을 위해 세금 혜택, 금융 지원 등의 프로그램을 실행하여야 할 것이다. 본 논문의 결과는 수용가의 투자 의사결정 및 정부 에너지 관련 부서의 정책에 도움이 될 것이다.

• 한국지반환경공학회 논문집
• /
• 제20권1호
• /
• pp.19-25
• /
• 2019

본 연구에서는 무선 센서 네트워크 시스템을 이용한 저수지 댐 시설물 전체의 모니터링 시스템의 적용성을 평가하고자 국내의 저수지 댐을 대표할 수 있는 구간을 시범구축 현장으로 선정해, 계측과 동시에 시설물의 상태를 평가할 수 있는 시스템을 구축, 운영하였다. 무선 센서 네트워크 구축을 위해 시설물의 현재 상태를 평가하여 위험인자를 도출함과 동시에 극한상태에서의 위험인자의 한계값을 도출하였다. 위험구역, 위험인자에 적합한 측정항목을 설정하여 현장에서 측정할 센서의 종류 그리고 위치를 결정하였다. 국내의 저수지 댐을 대표할 수 있는 필댐을 대상으로 현장에서 무선 센서 네트워크 시스템을 구축하여 모니터링 함으로써 시스템의 적용성을 평가하였으며, 현재 댐의 계측관리 기술인 부분 집중방식의 계측과 직접 비교함으로써 시스템의 적용성을 검증하였다.

• 지질공학
• /
• 제9권3호
• /
• pp.187-206
• /
• 1999

시추공 텔리뷰어 및 BIPS의 공내 검층자료를 이용하여 파쇄매질이 나타내는 투수율텐서를 수치적으로 계산하는 프로그램을 개발하였다. 본 프로그램은 검층자료의 분석을 통해 제공되는 불연속면의 방향과 두께등의 기하학적인 정보를 입력자료로 사용하며, EPM 모델에 근거한 관계식을 적용하여 투수율텐서를 구성하는 9개 성분의 상대적인 값을 계산한다. 거제시 일운면에 위치하는 연구지역 시추공을 대상으로 수리간섭 시험을 실시하여 암반의 이방성을 추정하였으며 BIPS 검층자료로부터 프로그램에 의하여 산정된 이론값과 비교, 분석하여 프로그램의 현장 적용성을 평가하였다. 수리간섭시험을 통하여 추정한 연구지역 암반의 수평적인 이방성비와 주축방향은 2.8 및 $N77^{\circ}CE$인 반면, 프로그램을 적용하여 산정한 값은 3.0 및 $N63^{\circ}CE$로 나타냈다. 두 결과가 불일치한 이유로는 수리간섭시험 해석결과의 신뢰성, EPM모델 및 3승법칙의 현장 적용성, 프로그램에서 가정한 단열의 크기-두께 관계식의 단순화 등의 문제점을 들 수 있다. 개발된 프로그램은 투수율텐서를 계산하는 초기모델로서 단열면의 거칠기, 충전물질의 충전정도 및 수리특성을 반영하는 수리인자의 적용을 통한 개선이 요구되며, 암반의 투수성이 양호하며 시추공 간의 거리가 가까운 연구지역에서 시추공간 수압시험을 실시할 때 3차원의 현장적용성 평가가 가능할 것으로 판단된다.

• 한국환경과학회지
• /
• 제18권8호
• /
• pp.877-883
• /
• 2009

This study has analyzed the scale, location, resource potential and feasibility of offshore wind farm scientifically and systematically based on the national wind map and GIS. For long-term wind power development, this study pursues siting strategy building, selection of target area and deciding development priority as well as the presenting a basis for assessment that are necessary for policy decision making by making theme layers under GIS environment. According to the analysis after organizing technological development by stages, even if only the most suitable sites are developed among the area of offshore wind farm candidates that can be developed under the current technological standard, it has been evaluated as being able to develop about 3 times of the wind power dissemination target until 2012. It is expected that about 5% of territorial water area can be developed in a short-term future while the southern offshore area possessing relatively favorable wind resource than the western offshore has been identified as the most feasible site. While about 23% of territorial water area has been classified as potential area for offshore wind farm development in a long-term future, even Jeju Island and offshore of Ulsan possessing excellent wind resource have been analyzed as feasible sites. The feasibility assessment of offshore wind lam development established by this study is expected to assist national strategy building for accomplishing the wind power dissemination target.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.432-439
• /
• 2009

This research project was carried out to develop the technique to assess quantitatively and rapidly the stability of a tunnel by using the measured displacement at the tunnel construction site under excavation. To achieve this purpose, a critical strain concept was introduced and applied to an assessment of a tunnel under construction. The new technique calculates numerically the strains of the surrounding ground by using the measured displacements during excavation. A numerical practical system was developed based on the proposed analysis technique in this study. The feasibility of the developed analysis module was verified by incorporating the analysis results obtained by commercial programs into the developed analysis module. To verify the feasibility of the developed analysis module, analysis results of models both elastic and elasto-plastic grounds were investigated for the circular tunnel design. Then the measured displacements obtained in the field are utilized practically to assess the safety of tunnels using critical strain concept. It was verified that stress conditions of in-situ ground and ground material properties were accurately assessed by inputting the calculated displacement obtained by commercial program into this module for the elastic ground. However for the elasto-plastic ground, analysis module can reproduce the initial conditions more closely for the soft rock ground than for the weathered soil ground. The stability of tunnels evaluated with two types of strains, that is, the strains obtained by dividing the crown displacement into a tunnel size and the strains obtained by using the analysis module. From this study, it is confirmed that the critical strain concept can be fully adopted within the engineering judgment in practical tunnel problems and the developed module can be used as a reasonable tool for the assessment of the tunnel stability in the field.

• 자동차안전학회지
• /
• 제14권4호
• /
• pp.43-52
• /
• 2022

Recently, the government has been expanding the supply of hydrogen vehicles according to the roadmap for vitalizing the hydrogen economy, but is developing safety assessment and inspection technology for the relevant vehicles. This study analyzed the prevention of hydrogen bus accidents' economic effect that arises from the application and development of large-capacity CHSS oil pressure repetition-test assessment technology, hydrogen bus internal chamber pressure transmission and emission volume inspection technology, among various technologies capable of assessing the safety of a hydrogen bus fuel system. To this end, the contingent valuation method (CVM), one of the value evaluation methods of non-market goods, was applied to investigate users' willingness to pay for each inspection technology. The survey for users' willingness to pay was conducted by attaching posters to promote surveys on the internet and within buses to the entire public. As a result of the analysis, the average WTP of the hydrogen bus internal chamber pressure transmission volume inspection technology was 25.3 KRW, the average WTP of the hydrogen bus internal chamber pressure emission volume inspection technology was 18.6 KRW, and the average WTP of the large-capacity CHSS oil pressure repetition-test assessment technology was measured at 16.7 KRW. In addition, the costs and benefits of the introduction of the relevant inspection technology were defined through the interviewing of experts at related research institutions and businesses. As a result of conducting an economic analysis (4.5% discount rate) according to the development of each inspection technology, economic feasibility was seen in all assessment and inspection technologies. As much as the technology is indispensable for the safe use of hydrogen buses, it shows that investment in related technology is very necessary in the future. However, because it was decided that the relevant analysis will differ according to the distribution rate of hydrogen buses, further analysis following this future distribution rate of hydrogen buses is needed, and future users should be made clearly aware of the safety and environmental nature of the technology.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.83-92
• /
• 2019

Land cover (LC) is an important factor in socioeconomic and environmental studies. According to various studies, a number of LC maps, including global land cover (GLC) datasets, are made using polar orbit satellite data. Due to the insufficiencies of reference datasets in Northeast Asia, several LC maps display discrepancies in that region. In this paper, we performed a feasibility assessment of LC mapping using Geostationary Ocean Color Imager (GOCI) data over Northeast Asia. To produce the LC map, the GOCI normalized difference vegetation index (NDVI) was used as an input dataset and a level-2 LC map of South Korea was used as a reference dataset to evaluate the LC map. In this paper, 7 LC types(urban, croplands, forest, grasslands, wetlands, barren, and water) were defined to reflect Northeast Asian LC. The LC map was produced via principal component analysis (PCA) with K-means clustering, and a sensitivity analysis was performed. The overall accuracy was calculated to be 77.94%. Furthermore, to assess the accuracy of the LC map not only in South Korea but also in Northeast Asia, 6 GLC datasets (IGBP, UMD, GLC2000, GlobCover2009, MCD12Q1, GlobeLand30) were used as comparison datasets. The accuracy scores for the 6 GLC datasets were calculated to be 59.41%, 56.82%, 60.97%, 51.71%, 70.24%, and 72.80%, respectively. Therefore, the first attempt to produce the LC map using geostationary satellite data is considered to be acceptable.

• Journal of Information Technology Applications and Management
• /
• 제21권4_spc호
• /
• pp.345-359
• /
• 2014

Technological, policy and economic factors are both important variables in maximizing the results of a national R&D program and key indicators in evaluating an R&D program's eligibility for financial support. Economic analysis, in particular, is used when selecting R&D programs, setting priorities, and estimating economic effects. This paper examines a series of methodological issues related to the economic analysis of national R&D programs within the framework of the current preliminary feasibility evaluation system, and proposes alternative approaches to each of the issues discussed. The issues include the definition of R&D valuation and establishment of valuation factors; estimation of sales attributable to R&D investment; assessment of the total economic value of R&D as intellectual assets; estimation of R&D benefits and assumption of related to sales; and the application of discount rates based on the weighted average cost of capital. Finally, this study presents directions for future research on analytical procedures and methods of improving the reliability of the results of economic analysis within the national technology planning system.

• ETRI Journal
• /
• 제31권5호
• /
• pp.489-499
• /
• 2009

This paper focuses on assessment and design of transmission systems for distribution of digital signals over standard Category-7A copper cables at speeds beyond 10 Gbps. The main contribution of this paper is on the technical feasibility and system design for data rates of 40 Gbps and 100 Gbps over copper. Based on capacity analysis and rate optimization algorithms, system parameters are obtained and the design implementation trade-offs are discussed. Our simulation results confirm that with the aid of a decision-feedback equalizer and powerful coding techniques, namely, TCM or LDPC code, 40 Gbps transmission is feasible over 50 m of CAT-7A copper cable. These results also indicate that 100 Gbps transmission can be achieved over 15 m cables.