• 한국응용과학기술학회지
• /
• 제12권2호
• /
• pp.157-163
• /
• 1995

The ultraviolet blocking agents used to skincare are largely classified ultraviolet scattering agent and ultraviolet absorbent agents. There are UVC, UVB, and UBA in ultraviolet ray(UV) showing shorter wavelength than visible light. Both visible light and UVA give rise to 1st dark-skinned phenomena. On exposure of the skin to UV, phenomena of skin variation are termed sunburn or suntan. There are chronic and acute adverse reactions in skin response to UV. The latter is caused by UVB, which has mainly effects on the skin. But lately due to destruction of ozone layer, UVA has more serious irritation on the skin than UVB. In this paper spectrometric properties of UV absorbent agents such as PABA, octyl-PABA, Urocanic acid, and 2-hydroxy-4-methoxy benzophenone in vitro have been investigate. As results, it was found that the three fomer were more suitable than the last. UV scattering measurements on the sample used inorganic pigments showed that pigments containing titanium dioxide had a better scattering effects than the inorganic pigments such as $Fe_2O_3$, $Al_2O_3$, etc.

• 열처리공학회지
• /
• 제33권2호
• /
• pp.57-64
• /
• 2020

In the present study, we investigated whether the surface oxidation of C-bearing TWIP steel ℃curs in the air during specimen delivery from an annealing furnace to a water bath and how the microstructure and tensile properties are influenced by surface oxidation. A cold-rolled Fe-18Mn-0.6 (wt%) steel was exposed in the air for 5 s after annealing at various temperatures (750℃, 850℃ and 1000℃) for 10 min in a vacuum, and then water-quenched. For comparison, another specimen, which had been quartz-sealed in a vacuum, was annealed at 1000℃ for 10 min and immediately water-quenched without exposure to air. The 750℃ and 850℃-annealed specimens and the quartz-sealed specimen showed a γ-austenite single phase in the entire specimen due to negligible surface oxidation. However, the 1000℃-annealed specimen exhibited a dual-phase microstructure consisting of ε-martensite and γ-austenite at the sub-surface due to decarburization. Whereas the specimens without decarburization revealed high elongations of 70-80%, the decarburized specimen exhibited a low elongation of ~40%, indicating premature failure due to cracking inside the decarburized layer with ε-martensite and γ-austenite.

• 소성∙가공
• /
• 제23권5호
• /
• pp.303-310
• /
• 2014

Functionally graded properties are characterized by the gradual variation in composition and structure through the volume of the material, resulting in corresponding gradation in properties of the material. Direct laser melting (DLM) is a prototyping process whereby a 3-D part is built layer-wise by melting metal powder with laser scanning. Studies have been performed on the functionally graded properties induced by direct laser melting of compositionally selected metallic powders. For the current study, quadrangle structures were fabricated by DLM using Fe-Ni-Cr powders having variable compositions. Hardness and EDX analysis were conducted on cross-sections of the fabricated structure to characterize the properties. From the analysis, it is shown that functionally graded properties can be successfully obtained by DLM of selected metallic powders with varying compositions.

• 대한금속재료학회지
• /
• 제47권9호
• /
• pp.558-566
• /
• 2009

The alloying effect of a small amount of nickel on low alloy steel for application to flue gas desulfurization(FGD) systems was studied. The structural characteristics of the rust layer were investigated by scanning electron microscopy(SEM). The electrochemical properties were examined by means of potentiostatic polarization test, potentiodynamic polarization test, and electrochemical impedance spectroscopy(EIS) in a modified green death solution of 16.9 vol.% $H_2SO_4$+0.35 vol.% HCl at $60^{\circ}C$ and an acid rain solution of $6.25{\times}10^{-5}M\;H_2SO_4+5.5{\times}10^{-3}M\;NaCl$ at room temperature. It was found that as the amount of nickel increased, the corrosion rate increased in the modified green death solution, which seemed to result from micro-galvanic corrosion between NiS and alloy matrix. In acid rain solution, the corrosion rate decreased as the amount of nickel increased due to the repulsive force of $NiFe_2O_4$ rust against $Cl^-$ ions by electronegativity.

• 통합자연과학논문집
• /
• 제15권4호
• /
• pp.137-144
• /
• 2022

This paper presents the effect of the supramolecular complex of GA (Glycyrrhizic acid) and Mt(menthol) and GA: Mt (4: 1) obtained on their basis can restore functional dysfunction of the liver mitochondria in alloxan diabetes, ie, inhibit lipid peroxidation. The hypoglycemic activity and mitochondrial membrane stabilizing properties of the supramolecular compound GA: Mt (4: 1) in alloxan diabetes were more pronounced than those of menthol, GA and its GK: Mt (2: 1) and GA: Mt (9: 1) compounds. According to the results obtained, the concentration of GA did not affect the peroxidation of lipid membranes of the liver mitochondria. However, a concentration of 15 μM of GA was found to reduce LPO (lipid peroxidation) formed by the effect of Fe²+ / ascorbate on the mitochondrial membrane by 58.0 ± 5.0% relative to control. The inhibitory effect of GA and its supramolecular compounds in different proportions with menthol on the peroxidation of lipids in rat heart and brain tissue has been studied

• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.24-28
• /
• 2003

This study was aimed to evaluate the quality of flash welded joints and optimize the welding process for flash butt welding of 780MPa grade high strength steel. And then the relationship between the welding process variables and the joint quality would be established. The effect of process variables between flashing and upsetting process was elucidated. Microstructure observation of the joint indicated that the decarburized band was mainly changed with upsetting process. Width of HAZ was also related to the upsetting conditions rather than the flashing conditions. Generally maximum hardness at HAZ was correlated with Ceq of steel and the empirical relationship was obtained to estimate the HAZ properties. Tensile elongation at the joint was usually decreased with increasing the initial clamping distance. Investigation of fracture surface after tensile and bending tests reveal that the origin of cracking at the joint was oxide inclusions composed of $SiO_2$, MnO, $Al_2O_3$, and/or FeO. The amount of inclusions was dependent on the composition ratio of Mn/Si in steel. If this ratio was above 4, the amount of inclusions was low and then the resistance to cracking at the joint was enough to maintain the joint performance. It was obtained that the flashing process influenced the conditions for the energy input to establish uniform or non­uniform molten layer, while the upsetting conditions influenced the joint strength. Heat input variable during flashing process was also discussed with the joint properties.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.305-305
• /
• 2013

태양전지는 무기태양전지와 유기태양전지 등이 연구 되고 있는데 [1] 그 중 유기물질의 장점(높은 수율, solution phase processing, 저비용으로 전력 생산)과 무기재료의 장점(높은 전자 이동도, 넓은 흡수 범위, 우수한 환경 및 열 안정성)을 융합함으로써 장기적 구조안정성의 확보와 광전변환의 고 효율화를 동시에 달성하기 위한 유기무기 하이브리드 태양전지가 최근 큰 관심을 끌고 있다[2]. 본 연구에서는 hybrid photovoltaics에 유기물 MDMO-PPV와 전도성 고분자 PEDOT:PSS를 무기물 GaN 위에 spin coating 하여 두께에 다른 효율을 측정하였다. 유기물 MDMO-PPV는 p-형으로 클로로벤젠, 톨루엔과 같은 유기 용매에 잘 녹으며 HOMO 5.33eV, LUMO 2.97eV, energy band gap 2.4eV이며 99.5%의 순도 물질을 사용하였다. 또한 정공 수송층(hole transport layer, HTL)으로 PEDOT:PSS를 사용하였으며, HOMO 5.0eV, LUMO 3.6eV, energy band gap 1.4eV를 가지며 증류수나 에탄올과 같은 수용성 용매에 잘 녹는 특성을 가지고 있다. 무기물은 III-V 족 물질 n-GaN(002)을 사용하였고 valence band energy 1.9eV, conduction band energy 6.3eV, energy band gap 3.4eV, 높은 전자 이동도와 높은 포화 속도, 광전자 소자에 유리한 광 전기적 특성을 가지고 있다. 기판으로는 GaN와 격자 부정합도와 열팽창계수 부정합도가 큰 Sapphire (Al2O3) 이종 기판을 사용하였다. 전극으로 Au를 사용하였으며 E-beam증착하였다. Reflector로서 Al를 thermal evaporator로 증착하였다 [3]. 실험 과정은 두께에 따른 효율을 알아보기 위해 MDMO-PPV를 900~1,500 rpm으로 spin coating 하였고, 열처리에 따른 효율을 알아보기 위해 열처리 온도 조건을 $110{\sim}170^{\circ}C$의 변화를 주었다. FE-SEM으로 표면과 단면을 관찰하였으며 J-V 특성을 알아보기 위해 각 샘플마다 solar simulator를 사용하여 측정하였고 그 결과를 논의하였다.

• 한국환경복원기술학회지
• /
• 제20권2호
• /
• pp.13-35
• /
• 2017

This study was carried out to analyze vegetation structure and change of the disturbed area in forest ecosystem(FE), riparian ecosystem(RE) and coastal ecosystem(CE) related to Regional Ecological Network at Chungnam province through constancy and dominance analysis, species diversity index, similarity index and canonical correlation analysis. Data were collected from April to October in 2015. As a result of constancy and dominance analysis of forest disturbed area, non-effective species(NES) was 30 species(17.0%), exported species(ES) was 98 species(55.7%) and imported species(IS) was 48 species(27.3%) among the total 176 species, respectively. In riparian disturbed area with total 139 species, there were 16 NES(11.5%), 98 ES(70.5%) and 25 IS(18.0%) respectively. In coastal disturbed area with 140 species, there were 20 NES(14.3%), 88 ES(62.9%) and 32 IS(22.9%) respectively. In all types of disturbed areas, the ratio of ES was higher than IS. As a result of species diversity, species richness and shannon's diversity index of disturbed area decreased in all kinds of crown strata such as tree, subtree, shrub and herb layer compared to the control area. As a result of similarity index, that of each type between control site and disturbed site was 0.374 in FE, 0.329 in CE and 0.259 in RE in the order. As a result of the CCA analysis, the number of present species, vine plants ratio and exported species ratio in disturbed area of FE and RE were decreased, and the naturalized plant ratio, imported species ratio and herb ratio were increased. But environmental factors of CE were not shown any clear tendency. In conclusion, many species occupied in control site disappeared into the disturbed area, and the naturalized plants and herb species were abundantly imported in the area. Therefore, it was considered that this study could be applied to the development of long-term and short-term ecological restoration techniques in view of vegetation changes.

• 대한토목학회논문집
• /
• 제29권4D호
• /
• pp.491-497
• /
• 2009

본 연구는 포장가속시험을 이용하여 다양한 온도와 하중재하방법에 따라 아스팔트 포장에 발생하는 소성변형의 특성을 분석하고, 주요 시험결과를 유한요소해석으로 예측하는 방법을 제시하고 있다. 가속시험용 포장단면은 한국도로공사 시험도로 대표 단면 중에 하나를 선정하여 동일하게 시공하고 3가지 온도조건(30, 40, $50^{\circ}C$)에서 반복이동하중에 의한 소성변형을 비교 분석하였다. 차량의 원더링 효과를 모사하기 위하여 가속시험기를 횡방향으로 좌우 35cm 범위 내에서 5cm 간격으로 이동하면서 시험을 수행하였다. 아울러 3가지 원더링 조건에 의한 소성변형의 차이도 수치해석을 통해서 검토하였다. 유한요소해석을 위하여 ABAQUS를 사용하였으며 가속시험 포장 단면을 plain strain 요소로 모델링하였다. 포장 층의 탄성계수는 FWD 시험에 의한 역산결과로 추정하였으며, 소성변형에 영향을 미치는 아스팔트 혼합물의 시간 의존성은 크리프 모델(creep model)로 고려하였다. 그리고 본 연구에서는 유한요소해석에 미치는 모델의 경계조건과 노상의 모델 포함 여부에 따른 영향을 두 가지 모델(전체모델과 부분모델)로 구분하여 검토하였다. 해석결과 두 가지 모델이 예측한 소성변형은 그 크기와 영향 범위에서 확연한 차이를 보였으며 계측결과와 비교하여 보면 노상이 모델에 포함하여야 할 것으로 판단되었다.

• 대한화학회지
• /
• 제61권4호
• /
• pp.179-184
• /
• 2017

본 논문은 $ZnO/SiO_2$를 나노 복합체(nano-compositions : NCs) 크기로 상온에서 화학적 방법으로 합성하였다. ZnO는 초음파 합성법으로 제조를 하였으며, $SiO_2$는 침전 방법을 이용하여 제조 하였다. $ZnO/SiO_2$의 구조적인 특성을 파악하기 위해 X-선회절 분석기(XRD), 주사전자현미경(FE-SEM), 푸리에 변환 적외선 스펙트럼(FT-IR)를 이용하여 $ZnO/SiO_2$가 형성되는 것을 확인 할 수 있었다. 광촉매적 특성을 판단하기 위해 $SiO_2$의 농도별로 제조된 $ZnO/SiO_2$를 Rhodamine-B 시약을 이용하여 광촉매 특성을 평가하였다. 그 결과 $SiO_2$의 농도가 증가할수록 광촉매 특성이 증가하는 것을 확인하였다. 그리고 $ZnO/SiO_2$를 가지고 항균성 실험을 진행하였다. 실험에 사용된 균(cell)은 대장균(E. coli)과 황색포도상구균(S. aureus)이다. 표면의 $SiO_2$층에 따른 항균 성실험을 진행한 결과 $SiO_2$ 층이 증가 할수록 항균 효과가 증가하는 것을 확인 할 수 있다.