• 미생물학회지
• /
• 제26권3호
• /
• pp.223-229
• /
• 1988

토양에서 분리 동정한 Bacillus subtilis K-4-3를 $\beta$-glucanase생산을 위하여 발효조를 사용한 결과 flask내 배양보다 배양 시간을 단축하였고 높은 역가의 조효소액을 얻을 수 있었다. 배양여액으로부터 균체의 $\beta$-glucanase는 색소에 접합된 변형기질을 이용하여 ammonium sulfate, fractionation Sephadex G-100 gel filtration, DEAE-Sphacel ion exchange chromotography의 순으로 정제하였으며, 정제효소는 15배로 정제되어 비활성이 25.7 unit/mg이였으며, 수율은 4.2%이였다. 본 효소의 일반적 특성을 검토한 결과 정제효소는 $50^{\circ}C$에서 최적반응을 나타내었고 그 활성은 $50^{\circ}C$에서 30분간 열처리에도 안정하였다. 효소의 최적 pH는 7.0 부근이었고 금속이온의 영향으로는 $Fe^{3+}$에 의해 강하게 저해받았고 $Li^{+1}$에 의해 약간 활성화 되였다. 분자량은 SDS 전기영동에 의해 17,000.으로 추정되었으며 monomer였다. 또한 본 효소에 의한 분해산불을 TLC로 관찰한 결과 2탄당, 3탄당 빛 4탄당으로 추정되는 분해산물을 얻을 수 았었으나 최종산물인 glucose는 얻을 수 없었다.

• 한국응용곤충학회지
• /
• 제10권2호
• /
• pp.77-83
• /
• 1971

증량제의 특성 중 Sumithion 분제의 주성분 분해에 영향을 미치는 요인을 밝힐 목적으로 시험하여 다음과 같은 결과를 얻었다. 가. 증량제의 특성 중 수분함량, 흡습성, C.E.C. 활성천, 염기총량, 표면적 등이 Sumithion 분제의 주성분 분해에 영향을 미치는 요인이 됨을 알았고, 나. 증량제에 의한 Sumithion의 분해산물은 Dimethyl phosphorothionate와 3-methyl-4-nirophenol 및 이의 유연화함은, n-hexane, ethyl ether 불용, methyl alcohol, ethyl, alcohol가용의 화함물이 있음을 알았다. 다. 증량제의 종류별로는 벤토나이트, 규조로, 카올린, 활석의 순으로 분해율이 높았다. 라. 그리고 증랑제의 Sumithion 분제 주성분 변화에 영향을 미치는 특성 중 수분과 염기가 가장 대표적인 주성분 분해 요인으로 보인다.

• Transactions on Electrical and Electronic Materials
• /
• 제11권2호
• /
• pp.73-76
• /
• 2010

The copper indium disulfide ($CuInS_2$) thin film was manufactured using sputtering and thermal evaporation methods, and the annealing with sulfurization process was used in the vacuum chamber to the substrate temperature on the glass substrate, the annealing temperature and the composition ratio, and the characteristics thereof were investigated. The $CuInS_2$ thin film was manufactured by the sulfurization of a soda lime glass (SLG) Cu/In/S stacked [1] elemental layer deposited on a glass substrate by vacuum chamber annealing [2] with sulfurization for various times at a temperature of substrate temperature of $200^{\circ}C$. The structure and electrical properties of the film was measured in order to determine the optimum conditions for the growth of $CuInS_2$ ternary compound semiconductor $CuInS_2$ thin films with a non-stoichiometric composition. The physical properties of the thin film were investigated under various fabrication conditions [3,4], including the substrate temperature, annealing temperature and annealing time by X-ray diffraction (XRD), field Emission scanning electron microscope (FE-SEM), and Hall measurement systems. [5] The sputtering rate depending upon the DC/RF power was controlled so that the composition ratio of Cu versus In might be around 1:1, and the substrate temperature affecting the quality of the film was varied in the range of room temperature (RT) to $300^{\circ}C$ at intervals of $100^{\circ}C$, and the annealing temperature of the thin film was varied RT to $550^{\circ}C$ in intervals of $100^{\circ}C$.

• 한국축산시설환경학회지
• /
• 제6권3호
• /
• pp.141-151
• /
• 2000

Over-grown seaweeds in Donghae(east sea of Korea peninsula) may impedes ocean environment, however, they can be a good nutrient resources for poultry feeds if they are utilized properly. In this study, seaweeds powder were tested for laying hens\` ration to investigate the effects on egg production rate, egg quality and calcium phosphorus excretion. One hundred 65wks-old brown layers were fed for 5 weeks alotted with seaweeds powder addition to experimental diet by 0(control), 0.5, 1.0 and 2.0%, respectively, and obtained following results; 1. Seaweeds proved a mid-protein low-energy feed resources with planty of K, Na, Ca, Mg, Sr and Fe. 2. Seaweeds addition by 0.5% and 1.0% improved egg production rate and egg-mass output markedly(p<0.05) than control. Seaweeds addition did not alter cholesterol level of yolk and yolk index, however egg shell thickness showed increasing trend by increasing seaweeds addition level. 3. Protein absorption and digestibility in seaweed addition treatments were significantly higher(p<0.05) than control group and protein contents of excreta in 0.5% and 1.0% treatments were reduced(p<0.05), which suggests effective protein metabolism for egg production. Increasing seaweeds addition reduces Ca and P contents in rectum and excreta, suggesting Ca and P utilization improvement in laying hens and lessening soil pollution. 4. In conclusion, seaweeds addition in layers' diet by 1.0% level improves egg-mass production and might be egg quality by increasing metabolism of protein, calcium and phosphorus.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.187-191
• /
• 2007

본 연구에서는 실리콘 웨이퍼 위에 마그네트론 스퍼터링 시스템을 이용하여 Ni 촉매 층을 증착시키고, $NH_3$와 $C_2H_2$ gas를 이용하여 탄소나노튜브를 성장시켰다. Hot-filament 플라즈마 화학기상 증착법으로 탄소나노튜브의 성장 온도는 350, 450, 550, $650^{\circ}C$로 변화시켰으며, 성장되어진 탄소나노튜브는 field emission scanning electron microscope(FESEM) 분석을 하여 관찰하였고, 접촉각 측정법을 이용하여 탄소나노튜브 층의 특성을 분석하였다. 결과적으로 성장 온도는 탄소나노튜브의 성장 특성을 변화시키는 중요한 요소이다.

• 한국식품영양과학회지
• /
• 제14권1호
• /
• pp.57-60
• /
• 1985

녹두 종자 발아억제물질을 생산하는 균을 동정한 결과 Streptomyces luteogriseus로 판정 되었으며, 본 저해물질의 순도검정을 위해 silica gel thin layer chromatography를 행한 결과 BuOH-HOAc-formic acid-water(15 : 12 : 3 : 10)와 BuOH-HOAc-water(4 : 1 : 5)의 용매게에서 각 Rf 치는 0.85와 0.92 의 단일 spot가 확인되었다. 또한 본 저해물질의 주요 radical을 조사해 본 결과 phenol기, pyrimidine 기, amono 기, 환원당 및 auxin은 함유되지 않았으며 단지 UV조사에 의해 형광을 나타내었다. 본 저해물질의 UV spectrum은 ${\gamma}^{H20}_{max}=252$ 였으며, IR spectrum 에서는 $3300{\sim}3500,\;2900{\sim}3000,\;1600{\sim}1700$ 및 $1400cm^{(-1)}$의 peak가 인정되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.412-412
• /
• 2008

ENIG(Electroless Nickel Immersion Gold)is a surface treatment method that is used most widely at fine pitch's SMT and BGA packaging process. ENIG has good diffusion barrier of Ni against solder and good wettability due to Au finish. But when the discoloration occurred on the Au finish of ENIG, some key characteristics related to the quality and reliability of PCB such as bondability, solderability and electrical flowing of packaging process could be deteriorated. In this paper, we have performed the water dip test ($88^{\circ}C$ purified water) which accelerates the galvanic corrosion of Ni diffused from the Ni-P layer. That is, the excessive oxidation of the Ni layer could result in non-wetting of the solder because the flux may not be able to remove excessive oxides. Though Au discoloration have been reported to be caused by Ni oxides in many literature, it is still open to verify and discuss The microstructures and chemical compositions have been investigated using FE-SEM, TEM, FIB, EDS and XPS. As a result, authors have found that the Au discoloration in ENIG type is severely caused by the oxidation of the Ni and the mechanism of Au discoloration can be confirmed through the experiment result of water dip test.

• Restorative Dentistry and Endodontics
• /
• 제19권1호
• /
• pp.45-63
• /
• 1994

128 freshly extracted human molars were used to study the interaction between dentinal smear layer removal with various agents, and the shear bond strength of a light cured glass ionomer cement to dentin. It was proposed that the removal of smear layers using acidic cleaners followed by incorporation of Fe mordant with dentin could enhanced the infiltration of monomer component in light curing glass ionomer cement and resulted in a high bond strength. For the first treatment process for removal of smear layers on the surfaces of dentin, 50 % citric acid, 10% maleic acid and 10 % phosphoric acid were used, and for the second treatment process, 15% ferric chloride, 6.8% ferric oxalate or 30% potassium oxalate were used. Distilled water was used as a control. After double sequential treatment on dentin, a light curing glass ionomer cement was bonded to dentin. After being immersed in water at 31'C for 24 hours, shear bond strengths were measured Instron testing machine(Model No.4202, USA). Surface changes were also observed using SEM (Hitachi, S-2300, Japan) after treatment process with each agents. The following conclusions were drawn : 1. Dentin surface cleaned with maleic acid and treated with ferric oxalate showed the highest bond strength with light curing glass ionomer cement. 2. Bond strengths of glass ionomer cement to dentin treated with maleic acid or citric acid were the highest, and that treated with phosphoric acid showed the lowest. 3. The effect of ferric oxalate on shear bond strength to dentin was always higher than that of ferric chloride. 4. The smear layers were clearly removed and the orifices of dentinal tubules were opened widely by the citric acid, maleic acid and phosphoric acid. 5. The orifices of dentinal tubules opened after using the first solution were closed with the treatment of ferric chloride. 6. The precipitate like crystals were formed on dentin surfaces and tubules, but a significant decrease in bond strength of glass ionomer cement to dentin surface treated with potassium oxalate.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.94-97
• /
• 2004

Micro/nano-sized L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles are considered to improve oxygen permeability in highly selective inorganic oxygen separation membrane. A L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane with perovskite structure is fabricated by a conventional solid-state reaction. As the oxygen permeation flux of the L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane was lower than commercial gas separation membranes, we coated the L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles to enhance the oxygen permeation flux. It has been demonstrated that the effective area of reactive free surface is an important factor in determining the effectiveness of the introduction of coating layer for oxygen permeation. The introduction of micro/nano L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ particles was very effective for increasing oxygen flux, as the flux was as much as 2 to 6 times higher than that of an uncoated L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ membrane.\delta$/ membrane.>/ membrane.brane.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.