• Journal of Welding and Joining
• /
• 제23권6호
• /
• pp.72-76
• /
• 2005

Friction surfacing of STS304 consumable rod on S45C substrate was investigated by microstructural observation and mechanical tests. STS304 layer formed a strongly-bonded thick layer under a wide range of surfacing conditions. The highest coating eefficiency was obtained in the condition of 1000rpm-2.5mm/sec-2.5mm/sec. The hardness distribution showed the peak value in the boundary layer and as the consumable rotation speed increased, the boundary layer also hardness increasing. As the consumable rotation speed and the traveling speed increased, the coating efficiency tended to decrease. On the other hand, as the feeding speed increased, the coating efficiency appeared to be increased. The new Fe-Cr-Ni alloy layer is showed in the interface layer on $5\~15{\mu}m$ width. After friction surfacing, corrosion resistance of STS 304 surfacing layers were equaled to that of STS304 consumable rod.

• 대한화학회지
• /
• 제53권3호
• /
• pp.368-376
• /
• 2009

이 연구는 고등학교 화학I에서 이루어지는 금속의 반응성 실험에서 발견되는 문제점을 살펴보 고 이에 대한 이해를 목적으로 한다. 금속의 반응성 실험에서 제기된 문제는 세 가지로, 첫째 Al(s)이 전혀 반응하지 않는 이유와 반응을 관찰할 수 있는 방안, 둘째 Zn(s)과 FeS$O_4$(aq)의 반응에서 기포가 관찰 되는 이유, 셋째 FeS$O_4$(aq)와 Zn(s)의 반응에서 나타나는 침전의 정체 확인이다. 연구 결과 다음과 같은 결론을 내릴 수 있었다. 첫째, Al(s)은 산화피막 생성속도가 매우 빨라 반응을 관찰할 수 없으며, 강한 염산을 이용한 경쟁 반응을 이용하여 산화막 생성이 억제된 상태에서 알루미늄과 다른 금속 이온과의 반응을 관찰할 수 있다. 둘째, 발생하는 기포는 수소이온의 환원에 의한 수소기체로, 금속과 금속이온의 반응과 함께 물속의 수소이온이 특정한 농도범위에서 경쟁적으로 금속과 반응하고 있음을 확인하였다. 셋째, FeS$O_4$(aq)와 Zn(s)의 반응에서 Fe(s)은 관찰되지 않으며 Zn(s) 표면에 생성되는 검은색의 자성을 띠는 물질은 Fe3$O_4$(s)이고 용액 속에서 침전되는 적갈색의 고체는 $Fe_2O_3$(s)임을 광전자분광(X-Ray Photoelectron Spectroscopy) 분석으로 확인하였다.

• 열처리공학회지
• /
• 제9권1호
• /
• pp.69-77
• /
• 1996

The fatigue crack initiation behavior of plasma ion nitrided SACM645 steel was investigated through the rotary bending fatigue test and residual stress measurement by XRD. It was shown by XRD and EPMA that the plasma ion nitrided surface was composed of ${\gamma}^{\prime}(Fe_4N)$phase and ${\varepsilon}(Fe_{2-3}N)$phase, and that the nitrogen atoms existed in Fe matrix in diffusion layer. The OM, SEM and Auger spectroscopy showed that the depth of compound layer, mixed compound and diffusion layer, and diffusion layer was $8{\mu}m$, $30{\mu}m$ and $300{\mu}m$, respectively. However, the microhardness test showed that the depth of hardened layer was $500{\mu}m$. The tensile strength of the ion nitrided SACM645 was lower than that of the unnitrided SACM645, and the ion nitrided specimen was fractured without plastic deformation. The nitrided SACM645 showed much poorer low cycle fatigue properties than the unnitrided one. In rotary bending fatigue, the fatigue strength of the ion nitrided SACM645 was higher than that of the unnitrided specimen, and the fatigue crack initiation sites changed by applied fatigue stress levels. The XRD result showed that the ion nitrided SACM645 has the compressive residual stress from surface to $600{\mu}m$ deep and the tensile residual stress from $600{\mu}m$ to deeper site. It is thought that crack initiation takes place at the point where the total stress of residual stress and applied stress is maximum.

• 보존과학회지
• /
• 제27권3호
• /
• pp.313-322
• /
• 2011

등록문화재 제171호인 이상범 가옥 및 화실의 꽃담을 보존처리하였으며, 처리 중 탈락된 시편의 과학적 분석을 통해 재료학적 특성 및 제작기법을 파악하였다. 분석 결과, 꽃담은 시멘트 블록으로 만든 벽체와 시멘트 모르타르로 만든 화면, 그리고 구조적인 보강을 위해 덧바른 시멘트 모르타르, 시멘트 페이스트 층으로 구성되었다. 꽃담의 시멘트 모르타르 층은 상부로 갈수록 세립의 광물질을 사용했으며, 풍화가 일어나지 않아 공극 및 탄산칼슘($CaCO_3$)의 생성이 적음을 알 수 있었다. 화면은 다양한 색상을 표현하기위해 시멘트 모르타르에 탄소화합물(C), 철산화물($Fe_2O_3$) 및 호분($CaCO_3$, 또는 석회) 등의 무기안료를 혼합하여 부조와 투조 기법으로 제작되었다. 보존처리는 벽체에 구조적인 안정성을 주기 위해 스테인레스 프레임을 제작하여 설치하였으며, 표면의 시멘트 모르타르를 제거함과 동시에 훼손부 및 균열부를 KSE Filler A, B로 메움처리 하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권8호
• /
• pp.1043-1048
• /
• 2010

This study investigated the effects of Fe-soy proteinate (Fe-SP) and magnesium oxide (MgO) dietary supplements on eggshell quality in laying hens. A total of 800 26-wk-old Hy-Line Brown hens were assigned to four dietary treatments: control (C), Fe-SP 100 (100 ppm Fe-soy proteinate), MgO (3 g MgO/kg diet), and Fe-SP 100+MgO. Each treatment had five replicates of 40 hens. The FT-IR (Fourier transform infrared) and XRD (X-ray diffraction) spectra of Fe-soy proteinate were different from those of $FeSO_4$ and soy digest. There were no significant differences among treatments in hen-day egg production, hen-house egg production, broken and soft egg rate, feed intake, or feed conversion. The MgO and Fe-SP 100+MgO treatments showed significantly (p<0.05) higher egg weights than the control group. Eggshell strength and thickness were significantly (p<0.05) higher in the MgO supplemented groups. The lightness and yellowness of the eggshells decreased, and the redness increased significantly in the Fe-SP treated groups. There were no significant differences among treatments in leukocyte level, but hemoglobin (Hb) concentrations were higher with Fe-SP treatments. In conclusion, supplementation with Fe-SP significantly affects eggshell color and hemoglobin concentration, whereas MgO supplementation increases eggshell strength and thickness. Egg weight and egg shell quality can be improved by supplementation of 100 ppm Fe in the form of Fe-SP and 3 g MgO/kg diet.

• 한국자기학회지
• /
• 제13권5호
• /
• pp.187-192
• /
• 2003

IrMn에 Mn을 첨가시킨 N $i_{80}$F $e_{20}$/[I $r_{22}$M $n_{78}$-Mn] $Co_{75}$F $e_{25}$ 다층박막을 상온에서 이온빔 증착(ion beam deposition: IBD)법으로 제작하여 그 자기적 및 열적 특성을 연구하였다. Mn이 첨가된 NiFe/[IrMn-Mn]/CoFe다층박막은 Mn이 첨가되지 않은 순수 합금 IrMn 박막 위의 CoFe 고정층 보다 큰 교환결합력( $H_{ex}$)과 방해온도(blocking temperature: $T_{b}$)을 가지고 있었다. Mn이 첨가되지 않는 I $r_{22}$M $n_{78}$ 와 CoFe 사이의 $H_{ex}$는 상온에서 거의 없었으나, 25$0^{\circ}C$ 열처리 후 100 Oe로 나타났다. IrMn 내에서 76.8-78.1 vol% Mn일 때, $H_{ex}$와 $T_{b}$는 크게 향상되었고, Mn이 0.6 vol%씩 증가함에 따라 크게 줄어들었다. NiFe/[IrMn-Mn]/CoFe 다층박막 구조에서 [(111)CoFe, NiFe]/(111)IrM $n_3$인 x-선 회절 피크비 평균값은 75.5, 77.5, 79.3 vol% Mn일 때 각각 1.4, 0.8, 0.6였다. 특히, 열처리 전 77.5과 78.7 vol% Mn일 때, $H_{ex}$는 각각 259와 150 Oe였다. 77.5 vol% Mn인 경우, $H_{ex}$가 열처리 온도 35$0^{\circ}C$까지 475 Oe였으며, 450 $^{\circ}C$에서는 200 Oe로 크게 감소하였다. 따라서 합금형 반강자성체 IrMn에서 높은 $H_{ex}$와 $T_{b}$을 얻을 수 있는 최적의 Mn 함유량의 존재를 확인하였다.다.다. 확인하였다.다.하였다.다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.160-161
• /
• 2002

One problem in giant magnetoresistance(GMR) spin valves and magnetic tunneling junctions(MTJ) exchange biased by Mn-based antiferromagnets is the Mn diffusion into the ferromagnetic layer and other layers upon annealing.$^{1-3}$ It seems that Mn diffusion that may occur during annealing has a key role in the exchange biasing. We have fabricated multilayers inserting the nanolayer(NL) between antiferromagnet and ferromagent using ion-beam deposition system to study the diffusion effect for the exchange bias. (omitted)

• 소성∙가공
• /
• 제19권6호
• /
• pp.357-362
• /
• 2010

Dry sliding wear behavior of pure Fe and Cu which have BCC and FCC crystal structure, respectively, was investigated. The wear characteristics of the pure metals with different crystal structure were compared. Dry sliding wear tests were carried out using a pin-on-disk wear tester at various loads under the constant sliding speed condition of 0.15 m/s against a silica ball at room temperature. Sliding distance was fixed as 600 m for all wear tests. Wear rate of a specimen was calculated by dividing the weight loss of the specimen after the test by the specific gravity and sliding distance. Worn surfaces and wear debris were analyzed by SEM. The wear of both pure Fe and Cu proceeded with surface deformation, resulting in similar wear rates despite of their structure difference under the current test conditions. Wear rates of both metals were low if the surface deformation due to wear forms thick surface-deformation layer that is strain hardened beneath the wearing surface. The pure Cu specimens showed a lot of oxides on the worn surface when tested at low loads less than 5 N, which resulted in very low wear rate.

• 한국진공학회지
• /
• 제16권1호
• /
• pp.1-6
• /
• 2007

우리는 O/Fe(100)의 원자적 구조와 MgO/Fe(100) 표면의 계면의 구조를 LEED I/V curve를 이용하여 분석하였다. 산소를 Fe(100) 표면에 흡착시켰을 때 Fe 표면의 첫 번째 층간 간격은 약 16 % 정도 팽창하는 것을 확인하였다. 1ML MgO를 Fe(100) 표면에 성장하였을 때, MgO의 O가 Fe의 on-top 위치에 자라나는 것을 확인하였고, MgO/Fe 계면의 층간 간격이 확장되는 것을 확인하였다. AIA(average intensity mixing approximation) 계산을 사용하여 단층 MgO 성장한 Fe(100) 계의 계면구조는 MgO/FeO/Fe(100)와 MgO/Fe(100)의 계면구조를 갖는 것을 확인하였다. 이것은 확장된 FeO 층의 존재를 보이고 MgO/FeO/Fe(100)와 MgO/Fe(100) 두가지 계면 구조의 공존을 보인 EELS 실험 결과를 뒷받침 한다.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.111-116
• /
• 2019

Chromium was coated on a steel substrate by the Cr(III) electroplating method, and corroded at $500-900^{\circ}C$ for 5 h in $N_2/0.1%H_2S-mixed$ gas to study the high-temperature corrosion behavior of the Cr(III) coating in the highly corrosive $H_2S-environment$. The coating consisted of (C, O)-supersaturated, nodular chromium grains with microcracks. Corrosion was dominated by oxidation owing to thermodynamic stability of oxides compared to sulfides and nitrides. Corrosion initially led to formation of the thin $Cr_2O_3$ layer, below which (S, O)-dissolved, thin, porous region developed. As corrosion progressed, a $Fe_2Cr_2O_4$ layer formed below the $Cr_2O_3$ layer. The coating displayed relatively good corrosion resistance due to formation of the $Cr_2O_3$ scale and progressive sealing of microcracks.