• KSBB Journal
• /
• 제16권3호
• /
• pp.295-301
• /
• 2001

Thiobacillus ferrooxid,$\alpha$ns와 pyrite 광석을 연마하여 resin에 고정한 시편을 대상으로 침출 시간에 따른 표면의 특성 변화를 EPMA 및 SEM-EDS를 이용하여 이미지와 원소구성비율에 따라 살펴보았다. 침출이 진행됨에 따라 표면의 철성분은 전체적으로 증가한 반면 원소황은 감소하는 경향을 나타냈다. 고배율에 익한 SEM 이미지에서 침출이 진행됨에 따라 도덧모양의 생성물이 침출 13일 경과 시점에 서 나타나 23일 경과 후까지 자라났으나 30일 경과 시점 에서는 표면전체에 새로운 층 생성된 결과로 나타났다. SEM 이미지 상에서 spot과 배경 지접의 원소 구성비를 EDS에 의하여 분석한 후 비교한 결과 초기에는 원소 구성비의 차이가 큰 값을 보이나 침출이 증가함에 따라 좌이가 나 지 않으며 이는 칩풀이 진행됨에 따라 pyrite 표면변이 접차 생성불이 칩착 되는 것으로 볼 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1501-1505
• /
• 2008

A broiler experiment was conducted to compare the effects of duration and level of iron-methionine chelate (Fe-Met) supplementation on the iron, copper (Cu) and zinc (Zn) content of broiler meat. Two hundred and fifty hatched Ross broiler chickens were randomly assigned to 5 dietary treatments. Each treatment had 5 replicates of 10 birds (5 males and 5 females) each. Birds were housed in raised floor batteries and fed traditional broiler diets ad libitum for 5 weeks. Dietary treatments were as follows: Control and two levels of Fe-Met (100 or 200 ppm in Fe) supplemented for either the whole period (0-5 wk) or grower period (4-5 wk). Production performance was not significantly affected by treatments. Iron content in the muscles (breast, leg and wing) and organs (liver and spleen) were significantly (p<0.05) increased as the level and duration of Fe-Met supplementation increased. The highest concentration of iron was shown in Fe-Met 200 fed for the whole period. Liver contained the highest amount of iron followed by spleen, leg muscle, wing muscle and breast muscle. Supplementation of Fe-Met 200 for the grower period resulted in higher iron concentration in liver and spleen than supplementation of Fe-Met 100 for the whole period. However, the same treatment resulted in lower iron concentration in muscles (breast, leg and wing) than the treatment of Fe-Met 100 for the whole period. In order to achieve the highest iron enrichment in the muscles, Fe-Met should be supplemented at 200 ppm in Fe for the whole period (5 wks). Fe-Met supplementation increased copper concentration in all muscles and organs except wing muscle. Zinc concentration decreased in breast and wing muscle but tended to increase in leg muscle, liver and spleen by Fe-Met 200 supplementation. Color of muscle was not significantly affected by Fe-Met treatments. However, redness of leg and breast muscle, and yellowness of leg and breast muscle tended to increase by supplementation of Fe-Met for the whole period. It was concluded that iron content of broiler meat can be effectively enriched by supplementation of 200 ppm of Fe as Fe-Met for 5 wks.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권10호
• /
• pp.1469-1474
• /
• 2002

This study was designed to evaluate the influence of a single or double dose of Fe dextran with organic trace mineral supplementation on the performance of piglets from dams fed diets with either inorganic (ITM) or organic trace minerals (OTM). It also determined the effect of the source of the trace minerals on the reproductive performance of sows. The trace mineral premixes were prepared using metal proteinates and the corresponding inorganic salts for the OTM and the ITM, respectively. Each mineral premix provided 100 ppm Fe/175 ppm Fe, 35 ppm Cu/170 ppm Cu, 90 ppm Zn/120 ppm Zn, and 40 ppm Mn/35 ppm Mn when added at 0.20% in sows /weaned pigs' diets, respectively. The first dose of Fe dextran was administered to piglets at 3 d and the second dose at 10 d after birth. One dose of Fe dextran supplied 100 mg of Fe. A total of 16 gestating sows (Landrace${\times}$Yorkshire) in parities 2 to 4 were randomly allocated to four treatments: 1) diet with ITM/one dose of Fe dextran to piglets, 2) diet with ITM/two doses of Fe dextran to piglets, 3) diet with OTM/one dose of Fe dextran to piglets, and 4) diet with OTM/two doses of Fe dextran to piglets. The total born alive, weaned, body weight at birth and at weaning were not affected by the sow's dietary treatment. Although organic trace mineral supplementation tended to increase the milk Fe content (p<0.10) at 7 d postpartum, piglets in all treatments performed equally from birth to weaning. The double doses of Fe dextran neither improved the average daily gain (ADG) nor influenced the survival of piglets from birth to weaning (21 d). Results suggest that a single dose of Fe dextran given to suckling pigs is adequate to sustain their needs for growth throughout the lactation period (21 d). Furthermore, there was a 21% improvement in both the ADG and the average daily feed intake (ADFI) (p<0.05) in weaned pigs fed diets with OTM. Cu and Fe in the liver (p<0.01), and Zn in both the bone (p<0.01) and the serum (p<0.01) were higher in piglets fed OTM than in those fed ITM. It would be concluded that single dose of Fe dextran administration with organic trace mineral supplementation show similar growth performance compared to 2 dose Fe dextran administration with inorganic mineral supplementation in young pigs.

• 한국재료학회지
• /
• 제10권11호
• /
• pp.755-759
• /
• 2000

RF magnetron sputtering법으로 초미세결정 Fe-Sm-O계의 박막을 상온에서 제작하여 산소분압에 따른 포화자화, 보자력, 고주파에서의 투자율(100MHz)을 조사하였다. 최적조건인 5%의 산소분압에서 제조한 초미세결정 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막은 포화자속밀도 18kG, 보자력 0.82 Oe, 실효투자율 (0.5~100MHz) 2,600 이상의 우수한 연자성을 나타내었다. 산소분압이 증가함에 따라 $\alpha$-Fe 결정립의 크기가 감소하여 10%이상의 산소분압에서는 FeO가 생성되어 연자기적 성질이 열화되었다. Fe-Sm-O계 박막의 전기비저항은 산소분압이 증가함에 따라 증가하는 경향을 나타내었으며 우수한 연자기적 성질을 가지는 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막의 경우, 전기비저항은 130 $\mu$$\Omega$cm이었다. 따라서 미세하게 형성된 $\alpha$-Fe 결정립과 높은 전기비저항 때문에 초미세결정 Fe(sub)83.4Sm(sub)3.4O(sub)13.2박막이 고주파에서 우수한 연자기적 성질을 가지는 것으로 판단된다.

• 센서학회지
• /
• 제17권3호
• /
• pp.203-209
• /
• 2008

Thick film formaldehyde (HCHO) gas sensors were fabricated by using $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramics. The powders of $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) were synthesized by conventional solid-state reaction method. By using the $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) paste, the thick-film formaldehyde sensors were prepared on the alumina substrate by silkscreen printing method. The experimental results revealed that $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramic powder has a perovskite structure and the thick-film sensor shows excellent gas-sensing characteristics to formaldehyde gas (sensitivity of $La_{0.8}Sr_{0.2}FeO_3$, S= 14.7 at operating temperature of $150^{\circ}C$ in 50 ppm HCHO ambient).

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2223-2226
• /
• 2009

Pristine and sulfur-doped (LiFe$PO_{3.98}S_{0.03}$) lithium iron phosphates were synthesized by a sol-gel method. The XRD pattern of the prepared materials suggested an orthorhombic structure with a Pnma space group and an absence of impurities. The Li/LiFe$PO_4$ or LiFe$PO_{3.98}S_{0.03}$ cells were employed for cycling studies at various temperatures (25, 50 and $60\;{^{\circ}C}$). In all cases, the Li/LiFe$PO_{3.98}S_{0.03}$ cell showed an improved performance with a stable discharge behavior of ~155 mA$hg^{-1}$. Nevertheless, pristine LiFeP$O_4$ cells presented poor discharge behavior at elevated temperatures, especially $60\;{^{\circ}C}$.

• 소성∙가공
• /
• 제32권2호
• /
• pp.67-73
• /
• 2023

To overcome a climate change, manufacturing complex-shaped electric mobility parts becomes one of the important issues for enhancing a performance of motor with reducing their weight. Therefore, development of laser-based additive manufacturing shed on light due to their flexible manufacturing capacity that can be suitable to solve the poor formability of Fe-Si alloys for electric mobility parts. Although there are several studies existed to optimize the performance of additively manufactured Fe-Si alloys, the post-annealing effect was not well investigated yet though this is important to control the texture and mechanical properties of additively manufactured parts. In the present work, annealing effect on the mechanical property and microstructure of additively manufactured Fe-4.5Si alloy was investigated. Because of the ordered phase initiation after annealing, the hardness of additively manufactured Fe-4.5Si alloy increased up to 1173 K while a hardness drop occurs at the 1273 K condition due to the micro-crack initiation. The response surface methodology result represents the 1173 K-5 h sample is an optimal condition to maximize the mechanical property of additively manufactured alloy without micro-cracks.

• 열처리공학회지
• /
• 제9권4호
• /
• pp.243-251
• /
• 1996

Dilatometric experiment and thermodynamic calculation have been performed to determine $M_s$, $A_s$ and driving forces for ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation of Fe-Mn alloys. The transformation temperatures($M_s$, $A_s$, $T_o) were decreased with increasing manganese content and were newly formulated as a function of manganese content. Driving force for ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation was increased from -75J/mole to -105J/mole with increasing manganese content from 15wt.% to 25wt.%. Transformation temperature hysteresis($A_s-M_s$) was also increased from 50K to 80K with increasing mangenese content from 15wt.% to 25wt.%. The small driving force(-75J/mole~-105J/mole) and small ${\Delta}T$(50K~80K) for ${\gamma}{\rightarrow}{\varepsilon}$ martensitic transformation indicated that Fe-Mn alloys behave like thermoelastic martensitic alloys : We would like to call them semi-thermoelastic martensitic alloys.

• 한국제4기학회지
• /
• 제3권1호
• /
• pp.47-54
• /
• 1989

현세 반담수와 염수습지 퇴적층에 함유된 황철석 ($FeS_2$)의 함량이 담수습지 퇴적층에서보다 상대적으로 많은 것으로 나타났다. 일본 히로시마 삼각주 퇴적층에서의 황철석 유황($FeS_2$-S)의 함량차이의 이유는 초기 현세동안에 고 해수면(palaeo-sea level)의 위치가 수백년 동안 같았으며 또한 배수가 잘 되지않은 염수습지가 현재의 평균해수면 보다 27m~28m 낮은 위치에 발달하였음을 지시한다.

• 한국광물학회지
• /
• 제26권2호
• /
• pp.101-110
• /
• 2013

나노크기 매킨나와이트(nanocrystalline mackinawite, FeS)는 높은 비표면적을 지닌 반응성 높은 광물로, 오염된 지하수나 토양의 복원을 위해 널리 사용된다. 또한 매킨나와이트는 혐기성 부식반응에 대해 열역학적으로 안정하고, 황산염 환원미생물의 대사에 의해 재생된다는 장점이 있다. 하지만 매킨나와이트 나노입자는 지하수 흐름에 의해 멀리 확산되거나 입자집적이 일어나 대수층 공극을 막는다. 따라서 현장복원을 위한 투과반응벽(permeable reactive barrier)의 설치를 위해서 나노크기 매킨나와이트에 대한 변형이 필요하다. 이를 위해 본 연구에서는 코팅법을 활용해 매킨나와이트 나노입자를 알루미나(alumina, $Al_2O_3$) 및 활성알루미나(activated alumina) 표면에 증착시켰다. 매킨나와이트의 코팅량은 pH에 따라 현저히 달랐으며, 두 종의 알루미나 모두 약 pH 6.9에서 최대 코팅이 관찰되었다. 이 pH에서 알루미나와 매킨나와이트는 반대의 표면전하(surface charge)를 띠어 두 광물 간 정전기적 인력이 발생하고, 이로 인해 효율적인 코팅이 일어났다. 이 pH에서 알루미나 및 활성 알루미나에 의한 코팅량은 각각 0.038 $mmol{\cdot}FeS/g$과 0.114 $mmol{\cdot}FeS/g$이었다. 혐기성 조건에서 코팅되지 않은 알루미나 및 활성 알루미나, 그리고 최적 pH에서 코팅된 알루미나 및 활성 알루미나를 사용해 아비산염(arsenite) 흡착실험을 수행했다. 코팅되지 않은 활성 알루미나는 코팅되지 않은 알루미나와 비교해 단위질량당 높은 아비산염의 제거를 보여주었으나, 매킨나와이트의 코팅에 의한 흡착량 증가를 보이지 않았다. 활성 알루미나는 높은 비표면적을 지니고 있어 반응성 높은 수산화작용기(hydroxyl functional group)가 다수 존재했고, 이로 인해 코팅된 매킨나와이트에 의한 아비산염의 제거가 중요하지 않았다. 반면 알루미나는 매킨나와이트 코팅에 의해 향상된 아비산염의 제거율을 보였는데, 이것은 알루미나에 존재한 수산화작용기가 아비산염과의 표면배위결합(surface complexation)에 소모되고, 코팅된 매킨나와이트에 의한 부가적인 흡착이 일어났기 때문이다. 코팅된 알루미나는 이전에 연구된 코팅된 실리카와 비교해보면 단위 비표면적당 매킨나와이트의 코팅량이 약 8배 높았으며, 더 높은 아비산염에 대한 흡착력을 보였다. 따라서 본 연구의 결과는 코팅된 알루미나는 투과반응벽의 설치에 적합한 물질이고, 특히 아비산염으로 오염된 지하수의 정화에 유용하게 적용될 수 있음을 지시하고 있다.