• 제목/요약/키워드: FePt thin films

검색결과 94건 처리시간 0.028초

비휘발성 메모리 소자응용을 위한 Eu 첨가량에 따른 BET 박막의 강유전 특성 (Ferroelectric Properties of Bi3.25La0.75Ti3O12 Thin Films with Eu Contents for Non-volatile Memory Device Application)

  • 김경태;김종규;우종창;김관하;김창일
    • 한국전기전자재료학회논문지
    • /
    • 제20권3호
    • /
    • pp.223-227
    • /
    • 2007
  • The effect of Eu contents on the ferroelectric properties of $Bi_{4-x}Eu_xTi_3 O_{12}$ (BET) thin films has been investigated. Bismuth Europium titanate thin films with a Eu contents were prepared on the $Pt/Ti/SiO_2/Si$ substrate by metal-organic decomposition technique. The structure and the morphology of the films were analyzed using X-ray diffraction (XRD) and field emission scanning microscopy (FE-SEM), respectively. From the XRD analysis, it was found that BET thin films have polycrystalline structure, and the layered-perovskite phase is obtained when the Eu contents exceeds 0.2 (x > 0.2). Also, the ferroelectric characteristics of the BET thin films were found to be dependent on the Eu content. Particularly, the BET films doped with x = 0.75 show better ferroelectric properties (remanent polarization 2Pr = 60.99 C/$cm^2$ and only a little polarization fatigue up to $3.5{\times}10^9$ bipolar switching cycling) than those doped with other Eu contents.

솔-젤법에 의한 강유전성 PFN 박막의 제조 및 특성평가 (Fabrication and Characterization of Ferroelectric PFN Thin Film by Sol-Gel Processing)

  • 류재율;김병호;임대순
    • 한국세라믹학회지
    • /
    • 제33권6호
    • /
    • pp.665-671
    • /
    • 1996
  • Ferroelectric Pb(Fe1/2Nb1/2)O3 thin films were successfully fabricated on ITO/Glass substrate by sol-gel proces-sing and characterized to determine the dielectric and electric properties. Viscosity of PEN sol measured to investigate rheological properties was 3.25 cP which was proper for coating. The sol also showed Newtonian behavior. RTA(Rapid Thermal Annealing) was used for the annealing of the thin film and 1200~1700$\AA$ thick PEN thin films were fabricated by repeating the intermediate and the final annealing. After the deposition of Pt as top electrode by vacuum evaporation dielectric and electric properties were measured. Dielectric properties of FFN thin film were enhanced by increasing the perovskite phase fraction with increasing the annealing temperature. Measured dielectric constant of 1700$\AA$ PFN thin film annealed at $650^{\circ}C$ was 890 at 1kHz Capacitatnce density and dielectric loss were 47 fF/${\mu}{\textrm}{m}$2 and 0.47 respectively. As a result of measuring Curie temperature PFN thin films had Curie point with a rang of 110~12$0^{\circ}C$ and showed broad dielectric peak at that point. Leakage current of the PFN thin films were increased with increasing the annealing tempera-ture.

  • PDF

Chemical Solution Deposition 방법을 이용한 BiFeO3/Pb(Zr0.52Ti0.48)O3 다층박막의 전기적 특성에 대한 연구 (Ferroelectric, Leakage Current Properties of BiFeO3/Pb(Zr0.52Ti0.48)O3 Multilayer Thin Films Prepared by Chemical Solution Deposition)

  • 차정옥;안정선;이광배
    • 한국진공학회지
    • /
    • 제19권1호
    • /
    • pp.52-57
    • /
    • 2010
  • $BiFeO_3(BFO)/Pb(Zr_{0.52}Ti_{0.48})O_3$(PZT) bilayer와 multilayer의 다층구조를 만들어 전기적 특성을 측정하여 같은 두께의 BFO 단층박막과 비교해 보았다. BFO와 PZT 용액을 이용하였으며 chemical solution deposition 방법으로 Pt/Ti/$SiO_2$/Si(100) 기판위에 각 박막을 증착하였다. X-ray diffraction 분석을 통해 모든 박막이 다배향(multi-orientation) 페로브스카이트 (perovskite) 구조를 가졌음을 확인하였다. BFO/PZT Bilayer와 multilayer 박막들은 BFO 단층박막의 비해 누설전류 값이 500 kV/cm에서 약 4, 5차수 정도 감소했으며, 이로 인해 BFO/PZT 다층박막의 강유전체 특성이 크게 향상되었다. BFO/PZT multilayer 다층구조 박막의 경우 안정된 이력곡선(hysteresis loop)을 나타냈으며, 잔류 분극(remanent polarization)의 값은 $44.3{\mu}C/cm^2$이었으며, 항전계($2E_c$) 값은 681.4 kV/cm였다.

Fabrication of Nd-Substituted Bi4Ti3O12 Thin Films by Metal Organic Chemical Vapor Deposition and Their Ferroelectrical Characterization

  • Kim, Hyoeng-Ki;Kang, Dong-Kyun;Kim, Byong-Ho
    • 한국세라믹학회지
    • /
    • 제42권4호
    • /
    • pp.219-223
    • /
    • 2005
  • A promising capacitor, which has conformable step coverage and good uniformity of thickness and composition, is needed to manufacture high-density non-volatile FeRAM capacitors with a stacked cell structure. In this study, ferroelectric $Bi_{3.61}Nd_{0.39}Ti_3O_{12}$ (BNdT) thin films were prepared on $Pt(111)/TiO_2/SiO_2/Si$ substrates by the liquid delivery system MOCVD method. In these experiments, $Bi(ph)_{3}$, $Nd(TMHD)\_{3}$ and $Ti(O^iPr)_{2}(TMHD)_{2}$ were used as the precursors and were dissolved in n-butyl acetate. The BNdT thin films were deposited at a substrate temperature and reactor pressure of approximately $600^{\circ}C$ and 4.8 Torr, respectively. The microstructure of the layered perovskite phase was observed by XRD and SEM. The remanent polarization value (2Pr) of the BNdT thin film was $31.67\;{\mu}C/cm^{2}$ at an applied voltage of 5 V.

이온빔 스퍼터링법으로 제조된 SBN 박막의 특성 (SBN Thin films Prepared by Ion Beam Sputtering method)

  • 이동근;장재훈;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
    • /
    • pp.1144-1147
    • /
    • 2002
  • Ferroelectric $Sr_xBa_{1-x}Nb_2O_6(0.25{\leq}x{\leq}0.75)$ thin films were prepared by the Ion Beam Sputtering method. Deposit onto Pt/Ti/$SiO_2$/Si(100) substrates. The deposited thin films were heat-treated for crystallization. Microstructure and crystallization behavior were examined using FE-SEM, XRD. Ferroelectric hysteresis were measured. The measured remanent polarization and coercive field values were $38{\mu}C/cm^2$ and 120kV/cm, respectively.

  • PDF