• Journal of Life Science
• /
• v.14 no.3
• /
• pp.496-500
• /
• 2004

This study has been performed for physico-chemical property and composition of sinew, testes, tail, blood and velvet antler in Elk. Amino acid contents in the sinew taurine, alanine, histidine, and lysine were high contained, histidine, glutamic acid, taurine, and lysine were high contained in testes, glutamic acid, lysine, alanine, glycine, and phenylalanine were high contained in tail, histidine, glycine, and lysine were high contained in blood, glutamic acid, lysine, taurine, alanine, and glycine were high contained in velvet antler. And, based on the amount of mineral, $K^{+}$, $Ca^{2+}$, and $P^{+}$ were 444.8, 166.6 and 242.9mg per 100g in sinew, respectively. $K^{+}$, $Ca^{2+}$ and $P^{+}$ were 294.4, 330.5, and 514.3 mg per 100g in testes, respectively, $K^{+}$, $Mg^{2+}$, and $P^{+}$ were 1420.6, 118.4, and 1105.2mg per 100 mg in tail, respectively. Fe3+,-K+, and P+ were 344.1, 1023.6 and 157.2 mg per 100 mg in blood, respectively and $K^{+}$, $Ca^{2+}$ and $P^{+}$ were 888.4, l1533.1 and 14722.0 in velvet antler, respectively. Finaly, difference were found in comparison of composition of free mwtal ion (N $a^{+}$, $K^{+}$, $Mg^{2+}$ and $Ca^2$) bwteen blood, tail, tests, sinew and velvet antler, and composition of free metal in blood higher than those othersd higher than those others.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.139-142
• /
• 2006

This study was conducted to develop antibacterial hand towel and dishcloth against food poisoning bacteria, and to examine the dyeability and the antibacterial activity of cotton fabrics against food poisoning bacteria, which was dyed with 1 % extracts of Geranium nepalense at $50\;to\;60^{\circ}C$ minutes. Surface colors of cotton fabrics treated nothing, alum $[AIK(SO_4)_2{\cdot}nH_2O]$, and calcium hydroxide $[Ca(OH)_2]$ with mordants showed grayed-yellow group, that treated copper sulfate $(CUSO_4)$ with mordant was grey-brown group, and that treated sulfate of iron $(FeSO_4{\cdot}7H_2O)$ made grayed-green group. Hue value of cotton fabrics dyed with the extracts of Geranium nepalense and dried until twenty times was an order of descent Y, that dried thirty to forty an order of descent YR. Cotton fabrics dyed with the extracts of Geranium nepalense had the antibacterial activity against food poisoning bacteria such as Staphylococcus aureus, Escherichia coil and Salmonella typhimurium by over 99.99%. And that dried over thirty times showed the antibacterial activities against food poisoning bacteria by 52.91%.

• Journal of Food Hygiene and Safety
• /
• v.12 no.2
• /
• pp.141-152
• /
• 1997

This study was performed to investigate the toxic effect of pyrrolizidine alkaloids from symphytum officinale i n rat. For this experiment, 120 male and female rats of Sprague-Dawley strain were used. The experimental groups were divided into five: Group CM and CF served as normal control with its gender. Group EM1 and EF1 were fed a 1% Symphytum officinal extract diet for 8 weeks. Group EM2 and EF2 fed a diet containing 2% extract diet. 4% extract diet into group EM3 and EF3 and 8% extract diet into group EM4 and EF4 were given. The results were as follows: 1. The major alkaloids of Symphytum officinale extract were symphytine, echmidine, and lasiocarpine. The amounts of total alkaloid were 168 $\mu\textrm{g}$ PAs/$m\ell$ extract. And contents of Pas in leaves were 0.05% wt.. 2. Total serum bilirubin concentrations increased significantly in group EM2, EM3, and EM4. Group EF1, EF2, EF3, and EF4 showed statistical significance for the group CF (p<0.05). 3. Aspartate transaminase activities were increased significantly in group EM3 and EM4 (p<0.05). Aspartate transaminase activities of EF1, EF2, EF3, and EF4 showed statistical significance for the group CF (p<0.05). 4. Alanine transaminase activities increased significantly in group EM3, EM4 (p<0.05). Alanine transaminase activities of EF1, EF2, EF3, and EF4 showed statistical significance for the group CF (p<0.05). 5. Alkaline phosphatase activities increased significantly in group EM2, EM3, and EM4 (p<0.05). Alkaline phosphatase activities of EF1, FE@, EF3, and EF4 showed statistical sigmificance for the group CF (p<0.05). 6. istopathological analysis of liver specimens from group EM3 and EM4 showed focal necrosis, periportal necrosis and apoptpsis. Hepatocytes obtained from group EM2 showed fatty change and hydropic degeneration in group EM3 and EM4. Chromatolysis and chromatin margination was shown in group EF2 and EF3. With the above results, it was demonstrated that the Symphytum officinal extract could induce functional change of liver, and histopathological change of liver in rats fed a diet containing extract. In conclusion, because of the risk of intoxication or adverse effect, the composition, dosage and mode of administration of herbal products should be monitored strictly. And this study serves as a reminder that herbal as well as orthodox medications may have serious side effects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.10
• /
• pp.1427-1435
• /
• 2010

A mixed finite element model was developed using the classical plate theory to analyze the nonlinear bending of a plate. The appropriate weight functions for the constraints integrated over the domain were determined by the Lagrange multiplier method by using the principle of minimum virtual energy; which provides the constitutive relations between force-like variables and strains. All of detail terms of element wise coefficient matrices and associate tangent matrices to be used in the Newton iterative method are presented. Then, the linear solutions of the current model and those of the traditional displacement model under the SS (simple support) boundary conditions were compared with the existing analytical solution. The post-processed images of the nonlinear results of the force-like variables are presented to show the continuity of the solutions at the joint of the element boundaries. Finally, the converged nonlinear finite element solutions of the current model are compared with those of existing traditional displacement model.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.29-29
• /
• 2001

열전재료는 열전현상을 가지고 있어 열전발전과 열선냉각이 가능하기 때분에 해저용, 우주용, 군사용의 특수 전원으로 이미 실용화되어있고, 반도체, 레이저 다이오드, 적외선 검출소자 등의 냉각기로 쓰여지고 있어 많은 연구자들이 이들 재료에 대한 연구에 관을 갖고 열전특성을 향상시키기 위하여 많은 연구를 진행하고 있다 이들 열전재료는 사용 온도구역에 따라 3종류로 구분하고 있으며, 실온부근의 저온 영역(20$0^{\circ}C$)이하에서는 $Bi_2Te_3$계 재료, 중온영역(20$0^{\circ}C$~50$0^{\circ}C$)에서sms (Pb,Ge) Te계 재료, 고온영역(50$0^{\circ}C$~lOoo$^{\circ}C$)에서는 Si-Ge계 Fe Si계 재료가 이용되고 있다. 본 연구에서는 실온에서 성능지수가 높은 Bi_2(Te,Se)_3$에 대한 연구를 진행하였다. Bi_2(Te,Se)_3$계 열전재료는 기존의 공법인 Zone melting법을 이용하는 경우 성능지수가 높으나, 단위정이 Rhombohedral 구조파 기저면(basal plane)에 벽개성이 있는 관계로 재료의 적지 않은 손실과 가공상의 어려움이 있다. 또한 사료전체에 걸쳐 화학적으로 균질한 고용체를 얻는 것도 어려운 문제점으보 부각되고 있디 따라서 이와같은 문제점을 보완하기 위하여 용질원자의 편석감소, 고용도의 증가, 균일 고용체 형성, 결정립의 미세화등의 장점이 있는 급속응고법을 본 연구에 응용하였다. 본 연구에서는 위에서와 같은 급속응고의 장점과 대량 가공이 능늪한 연간압출공정을 이용하여 제조된 분말을 성형화 하였다. 특히 열간압출 가공에 있어서 압축다이 각 변화는 재료의 소성유동에 매우 중요한 역하을 하게되며, 이와 갇은 소성유동은 본 재료의 열전특성에 중요한 영향을 미치는 C 면 배양에 중요한 역할을 한 것으 로 기대된다. 이에 본 연구에서는 압출다이 각도 변화에 따른 미세조직변화와 이들 조직이 강도와 열전특성에 미치는 영향을 석하고자 한다. 압출재의 미세조직은 XRD(X Ray Diffraction), SEM(Scanning Electron Microscopy)으로 분석하였으며, 열전특성인 Seebeck계수($\alpha$)와 전기비저항( $\rho$ )은 열전측정장치로, 기계적 강도는 MTS장비를 이용하여 이루어졌다. 또한 압축다이각도 변화에 따른 결정방위 해석은 모노크로미터가 장착된 X RD장비감 이용하여 분석되었다.

• Journal of Biomedical Engineering Research
• /
• v.26 no.2
• /
• pp.123-127
• /
• 2005

Compression Hip Screw (CHS) is one of the most widely-used prostheses for the treatment of intertrochanteric fractures because of its strong fixation capability. Fractures at the neck and screw holes are frequently noted as some of its clinical drawbacks, which warrant more in-depth biomechanical analysis on its design variables. The purpose of this study was to evaluate changes in the strength with respect to the changes in design such as the plate thickness and the number of screw holes. Both mechanical test and FEM analysis were used to systematically investigate the sensitivities of the above-mentioned design variables. For the first part of the mechanical test, CHS (n=20) were tested until failure. The CHS specimens were classified into four groups: Group Ⅰ was the control group with the neck thickness of 6-㎜ and 5 screw holes on the side plate, Group Ⅱ 6-㎜ thick and 8 holes, Group Ⅲ 7.5-㎜ thick and 5 holes, and Group Ⅳ 7.5-㎜ thick and 8 holes. Then, the fatigue test was done for each group by imparting 50% and 75% of the failure loads for one million cycles. For the FEM analysis, FE models were made for each group. Appropriate loading and boundary conditions were applied based on the failure test results. Stresses were assessed. Mechanical test results indicated that the failure strength increased dramatically by 80% with thicker plate. However, the strength remained unchanged or decreased slightly despite the increase in number of holes. These results indicated the higher sensitivity of plate thickness to the implant strength. No fatigue failures were observed which suggested the implant could withstand at least one million cycles of fatigue load regardless of the design changes. Our FEM results also supported the above results by showing a similar trend in stress as those of mechanical test. In summary, our biomechanical results were able to show that plate thickness could be a more important variable in design for reinforcing the strength of CHS than the number of screw holes.

• Journal of Biomedical Engineering Research
• /
• v.31 no.3
• /
• pp.199-209
• /
• 2010

The locking compression plates-distal femur(LCP-DF) are being widely used for surgical management of the extra-articular complex fractures of the distal femur. They feature locking mechanism between the screws and the screw holes of the plate to provide stronger fixation force with less number of screws than conventional compression bone plate. However, their biomechanical efficacies are not fully understood, especially regarding the number of the screws inserted and their optimal configurations. In this study, we investigated effects of various screw configurations in the shaft and the condylar regions of the femur in relation to structural stability of LCP-DF system. For this purpose, a baseline 3-D finite element (FE) model of the femur was constructed from CT-scan images of a normal healthy male and was validated. The extra-articular complex fracture of the distal femur was made with a 4-cm defect. Surgical reduction with LCP-DF and bone screws were added laterally. To simulate various cases of post-op screw configurations, screws were inserted in the shaft (3~5 screws) and the condylar (4~6 screws) regions. Particular attention was paid at the shaft region where screws were inserted either in clustered or evenly-spaced fashion. Tied-contact conditions were assigned at the bone screws-plate whereas general contact condition was assumed at the interfaces between LCP-DF and bone screws. Axial compressive load of 1,610N(2.3 BW) was applied on the femoral head to reflect joint reaction force. An average of 5% increase in stiffness was found with increase in screw numbers (from 4 to 6) in the condylar region, as compared to negligible increase (less than 1%) at the shaft regardless of the number of screws inserted or its distribution, whether clustered or evenly-spaced. At the condylar region, screw insertion at the holes near the fracture interface and posterior locations contributed greater increase in stiffness (9~13%) than any other locations. Our results suggested that the screw insertion at the condylar region can be more effective than at the shaft during surgical treatment of fracture of the distal femur with LCP-DF. In addition, screw insertion at the holes close to the fracture interface should be accompanied to ensure better fracture healing.

• Microbiology and Biotechnology Letters
• /
• v.7 no.1
• /
• pp.37-46
• /
• 1979

In order to investigate the compositional change of the lauan and pine sawdust media during the coltivation of oyster mushroom (Pleurotus ostreatus) chemical components of the two media and mushroom were analized periodically from spawning to ending. The results are summerized as follows: 1) The total yield of mushroom from the lauan sawdust media was 6.39 kg/$m^2$, and from the Pine saw-dust media 6.31 kg/$m^2$, 94％ of which was produced from the first and second cropping period. 2) In both media ash content increased gradually, while organic matter content decreased as the cultivation progressed. Moisture content, which was about 79％ at the time of spawning, decreased a little during the priod of mycelial propagation, after which no change was observed. 3) Total nitrogen content of the two media decreased gradually as the cultivation progressed, and total loss of insoluble nitrogen was greater than that of soluble nitrogen. Amino nitrogen content tended to increase continually. 4) In both media pentosan, $\alpha$-cellulose, lignin and C/N ratio decreased gradually, while the content of reduced sugar, trehalose and mannitol continued to increase. 5) In both media phosphorus, potassium, manganese and zinc decreased, and magnecium, calcium, iron and copper showed irregular changes. 6) CMC-saccharifying and liquefying activity gradually increased from after mycelial propagation to the second cropping, after which it decreased in both media. Xylanase activity rapidly and greatly increased during the second cropping period rather than the first period. At the start of the third cropping period the activity decreased slowly. Protease activity was highest after mycelial propagati, after which it gradually decreased. The pH of the two media decreased as the cultivation progressed. 7) In both media little change was observed in the content of the components of mushroom cropped from the first to the third period, but slight decrease was noticed at the fourth cropping.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.10
• /
• pp.1319-1326
• /
• 2014

Rapamycin, produced by the soil bacterium Streptomyces hygroscopicus, has the ability to suppress the immune system and is used as an antifungal, anti-inflammatory, antitumor, and immunosuppressive agent. In an attempt to increase the productivity of rapamycin, mutagenesis of wild-type Streptomyces hygroscopicus was performed using ultraviolet radiation, and the medium composition was optimized using glycerol (which is one of the cheapest starting substrates) by applying Plackett-Burman design and response surface methodology. Plackett-Burman design was used to analyze 14 medium constituents: M100 (maltodextrin), glycerol, soybean meal, soytone, yeast extract, $(NH_4)_2SO_4$, $\small{L}$-lysine, $KH_2PO_4$, $K_2HPO_4$, NaCl, $FeSO_4{cdot}7H_2O$, $CaCO_3$, 2-(N-morpholino) ethanesulfonic acid, and the initial pH level. Glycerol, soytone, yeast extract, and $CaCO_3$ were analyzed to evaluate their effect on rapamycin production. The individual and interaction effects of the four selected variables were determined by Box-Behnken design, suggesting $CaCO_3$, soytone, and yeast extract have negative effects, but glycerol was a positive factor to determine rapamycin productivity. Medium optimization using statistical design resulted in a 45% ($220.7{\pm}5.7mg/l$) increase in rapamycin production for the Streptomyces hygroscopicus mutant, compared with the unoptimized production medium ($151.9{\pm}22.6mg/l$), and nearly 588% compared with wild-type Streptomyces hygroscopicus ($37.5{\pm}2.8mg/l$). The change in pH showed that $CaCO_3$ is a critical and negative factor for rapamycin production.

• Journal of Chest Surgery
• /
• v.29 no.3
• /
• pp.315-321
• /
• 1996

Bronchoplastlc procedures including sleeve lobectomy were initially introduced for patients whose pulmonary function was insufficient to tolerate pneumonectomy In more recent years, sleeve lobectomy has evolved as an alternative to pneumonectomy in carefully selected cases of bronchogenic carcinoma, especially for centrally located lesions. Between 1992 and 1995, bronchoplastic procedures for bronchogenic carcinoma were performed in 15 patients and the majority of operative procedures were sleeve lobectomy (W: 12). All procedures were considered as complete and potentially curative. Mean age was 62.3 years (range 46 to 70 years) and there were 12 males and 3 females. Of 15 patiients, 7 underwent right upper sleeve, 2 underwent right lower sleeve, 5 underwent left upper sleeve, and 1 underwent right sleeve pneumonectomy. Postoperative staging was , stage I in 3, stage ll in 8, stage llla in 3 and stage lII in 1. The postoperative complications included anastomosis site obstruction due to granulation tissue in 1, local recurrence in 3, and wound infection in 1 There were 1 operative death due to sepsis and 2 late deaths. The three-year survival rate was 80%. The significant correlation was observed (r=0.11) between the predicted FEVI (1.851 L) and measured FEVI (1 762L). In conclusion, bronchoplastic procedure will have better prognosis than pneumonectomy in selected lung cancer patients because of preserving good function in remnant lung.