• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.39-46
• /
• 2015

Objective of this research was to investigate the influence of compositions and concentrations of fertilizer solutions on the vegetative growth and nutrient uptake of 'Seolhyang' strawberry. To achieve this, the solutions of acid fertilizer (AF), neutral fertilizer (NF), and basic fertilizer (BF) were prepared at concentrations of 100 or $200mg{\cdot}L^{-1}$ based on N and applied during the 100 days after transplanting. The changes in chemical properties of the soil solution were analysed every two weeks, and crop growth measurements as well as tissue analyses for mineral contents were conducted 100 days after fertilization. The growth was the highest in the treatments with BF, followed by those with NF and AF. The heaviest fresh and dry weights among treatments were 151.3 and 37.8 g, respectively, with BF $200mg{\cdot}L^{-1}$. In terms of tissue nutrient contents, the highest N, P and Na contents, of 3.08, 0.54, and 0.10%, respectively, were observed in the treatment with NF $200mg{\cdot}L^{-1}$. The highest K content was 2.83%, in the treatment with AF $200mg{\cdot}L^{-1}$, while the highest Ca and Mg were 0.98 and 0.42%, respectively, in BF $100mg{\cdot}L^{-1}$. The AF treatments had higher tissue Fe, Mn, Zn, and Cu contents compared to those of NF or BF when fertilizer concentrations were controlled to equal. During the 100 days after fertilization, the highest and lowest pH in soil solution of root media among all treatments tested were 6.67 in BF $100mg{\cdot}L^{-1}$ and 4.69 in AF $200mg{\cdot}L^{-1}$, respectively. The highest and lowest ECs were $5.132dS{\cdot}m^{-1}$ in BF $200mg{\cdot}L^{-1}$ and $1.448dS{\cdot}m^{-1}$ in BF $100mg{\cdot}L^{-1}$, respectively. For the concentrations of macronutrients in the soil solution of root media, the AF $200mg{\cdot}L^{-1}$ treatment gave the highest $NH_4$ concentrations followed by NF $200mg{\cdot}L^{-1}$ and AF $100mg{\cdot}L^{-1}$. The K concentrations in all treatments rose gradually after day 42 in all treatments. When fertilizer concentrations were controlled to equal, the highest Ca and Mg concentrations were observed in AF followed by NF and BF until day 84 in fertilization. The BF treatments produced the highest $NO_3$ concentrations, followed by NF and AF. The trends in the change of $PO_4$ concentration were similar in all treatments. The $SO_4$ concentrations were higher in treatments with AF than those with NF or BF until day 70 in fertilization. These results indicate that compositions of fertilizer solution should to be modified to contain more alkali nutrients when 'Seolhyang' strawberry is cultivated through inert media and nutri-culture systems.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.

• Journal of the Speleological Society of Korea
• /
• no.74
• /
• pp.23-31
• /
• 2006

(1) Kaeusetgul Cave in Kimnyong-Ri, Jeju-Do, Korea. Kaeuset-gul Cave (KC) is situated in NNE area of the Manjang-gul cave (125m a.s.l.). Kaeuset-gul Cave lies at $126^{\circ}45'22"$ E in longitude and $33^{\circ}33'09"$ N in latitude. The coast belong Kimnyeong-Ri, Kujwa-eup, Jeju-Do. Altitude of the cave-entrance is 10m and length of the cave is 90m. Lava hand-specimens of KC are studied by X-ray fluorescence analysis (XRF). Average major chemical components of specimens from KC is as follows (wt.%); $SiO_2=47.03$, $TiO_2=3.16$, $Al_2O_3=18.41$, FeO*=13.53, MnO=0.14, MgO=5.05, CaO=8.66, $Na_2O=2.81$, $K_2O=0.67$, $P_2O_5=0.55$ in KC. Polarizing microscopic studyindicates that these specimens are described of alkali-basalt. (2) Tachibori Fuketsu (Cave) in Shizuoka Prefecture, Fuji Volcano, Japan Tachibori Fuketsu lies attoward the south in skirt of the Fuji volcano, $138^{\circ}42'04"$ east longitude and $35^{\circ}18'00"$ north latitude. The location of cave entrance is 2745, Awakura, Fujinomiya-shi, Shizuoka Prefecture. The above sea level and length of Tachibori Fuketsu are 1,170m and 82m. Average major chemical components of specimens from cave areas follows (Total 100 wt.%) ; ($SiO_2$=50.52, $TiO_2$=1.69, $Al_2O_3$=15.47, FeO*=13.13, MnO=0.20, MgO=5.97, CaO=9.17, $Na_2O$=2.52, $K_2O$=0.94 and $P_2O_5=0.40).$ Polarizing microscopic study indicates that these specimens may belong to tholeiite-basalt series. According to polarizing microscopic study, Au (Augite), P1 (Plagioclase), and O1 (Olivine) are contained as phenocryst minerals. (3) Gorely Cave in Kamchatka Peninsula, Russia Gorely caldera is located at the southeastern part of Kamchatka Peninsula, about 75km southwest of Petropavlovsk-Kamchatskiy.. Gorely lava caves are situated in NHE area of Mt. Gorely volcano (1829m a.s.1.). One of lava cave (Go-9612=K-1) lies at $158^{\circ}00'22"$ east longitude and $52^{\circ}36'18"$ north latitude. The elevation of cave entrance is about 990m a.s.1. and the main cave extends in the NNW direction for about 50m by 15m wide and 5m in depth. The cave of K-3is near the K-1 cave. "@Lava hand-specimens K-1 and K-3 caves are studied by X-ray fluorescence analysis and polarizing microscopic observation. Average major chemical components of specimens from these caves are as follows (wt.%) ;($SiO_2$=55.12, $TiO_2$=1.25, $Al_2O_3$=16.07, T-FeO* =9.41, MnO=0.16, MgO=5.01, CaO=7.21, $Na_2O$=3.39, $K_2O$=1.92, $P_2O_5$=0.45) and these values indicate that the Gorely basaltic andesite belong to high alumina basalt. Polarizing microscopic study indicates that these specimens are described of Augite andesite.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.160-164
• /
• 2007

In the steel industry, there is a need to produce large forged parts for the automobile industries, the flight and shipping industries ad military industries. In the steel-industry application, a cogging technique for cast ingots is required, because the major parts are needed as one large body in order to obtain higher quality. Therefore, cogging process is the primary step in manufacturing of practically large open-die forging. In the cogging process, internal voids have to be eliminated as defects, The present work is concerned with the elimination of the internal voids in large ingots so as obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis are performed to investigate the overlap defect of cast ingots during cogging stage. The measure flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of void closure are performed by using the $DEFORM^{TM}$-3D. The calculated results of void closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the void closure can be investigated by the comparison of practical experiment and numerical analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.48-53
• /
• 2005

Finger millet straw and rice straw are the major source of dry roughage in southern India. They distinctly vary in their morphological and nutritional characters. Hence an effort was made to study the nutrient utilization, milk yield and composition in crossbred dairy cows fed either finger millet (group 1) or rice straw (group 2) as a source of dry roughage. The cows in both the groups were fed as per requirement with concentrate, green fodder and straw in the ratio of 30:45:25 parts (DM). At the end of 50 days of preliminary feeding a digestibility trial was conducted for 7 days and pooled samples of feed, fodder, feces, urine and milk were analysed for macro and micro nutrient content. Finger millet straw contained more CP, Ca, P, Mg, Cu, Zn and Co than rice straw and rice straw contained higher ADF, ash and silica. The intake of DM, CP, EE, NDF, ADF and most micronutrients (Ca, P, Mg, Cu, Zn, Fe, Mn and Co) was significantly higher in cows fed finger millet straw. The digestibility of DM, CP, NDF and ADF was significantly higher in cows fed finger millet straw and the gut absorption of Ca, Cu, Mn and Co was significantly higher in cows fed finger millet straw. The dietary requirement of all micronutrients in both the group of cows could be met irrespective of the type of roughage fed except that of Ca, which was low (0.61 and 0.40%) in rice straw fed cows. The average daily milk yield (L/cow) was also higher (7.0 L) in cows fed finger millet straw as compared to cows fed rice straw (6.3 L). The average milk composition also did not differ except that of milk fat which was significantly (4.7 and 4.5%) low in cows fed rice straw. The overall results of this study have indicated that finger millet straw is a better source of dry fodder than rice straw and while feeding rice straw as the sole roughage to dairy cows there is need to supplement additional calcium as this could be one of the limiting nutrients for milk production.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.1
• /
• pp.1-14
• /
• 2000

알루나이트는 포항지역의 제3기 연일층군의 이암 층내의 탄산염 결핵체 주변에서 할로이사이트와 함께 극미립 변질물 (1-2 $\mu\textrm{m}$)로서 산출된다. 알루나이트는 정육면체와 유사한 능면체 결정형을 이루고 침상 내지 단주상의 할로이사이트와 밀접한 공생관계를 이룬다. X-선회절 분석에 의해서 이 알루나이트는 a=6.9897(1) $\AA$, c=17.2327(4)$\AA$, V=728.75(3) $\AA$3의 격자상수값을 갖는 것으로 밝혀졌다. X-선형광된 이 알루나이트의 화학식은 (K0.94N0.06)(Al2.55Fe3+0.45)(SO4)2(OH)6 으로서, 나트로알루나이트 단성분을 6-7 mole%정도 함유하는 것으로 분석되었다. 또한 시차열분석 (TG-DTG-DTA)을 통해서 알루나이트의 승화성 성분들 (H2O와 SO3)의 존재와 함유 정도를 조사하였고, 고온X-선회절분석을 병행하여 이 광물의 OH기의 이탈 반응 (52$0^{\circ}C$)과 고온상으로의 전이 반응 ($600^{\circ}C$ 및 $700^{\circ}C$)을 감정 하였다. K/Ar 법으로 측정된 알루나이트의 생성 연대 ($0.342\pm$0.008 Ma)와 안정동위원소들의 분석 결과 ($\delta$18Oso4=-1.7, $\delta$DSMOW=-31, $\delta$34S=-10.8)는 이 알루미늄 황산염 광물이 연일충군의 융기 이후에 야기된 민물의 유입에 의한 표성기원의 변질작용의 결과로 생성되었음을 지시한다. 알루나이트+할로이사이트 공생군의 침전은 이암 내에서 조성된 강산성 (pH=2-3)의 알루미늄 황산염 용액이 탄산염 결핵체를 만나 반응하여 pH가 국지적으로 증가되어 (pH=4) 과포화되는 과정에 의해서 야기되었다. 컴퓨터를 이용한 Al3+의 포화지수에 관한 화학적 평형 모델링 실험 결과, 알루미늄 황산염 용액으로부터의 알루나이트와 할로이사이트의 침전은 pH=4 및 \ulcornerSO42-=10-4M 조건에서 K+과 Si(OH)4의 농도가 10-4M 이상 유지되어야 가능한 것으로 밝혀졌다.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.410-416
• /
• 2008

The gene SfXyn10, which encodes a protease-resistant xylanase, was isolated using colony PCR screening from a genomic library of a feather-degrading bacterial strain Streptomyces fradiae var. k11. The full-length gene consists of 1,437bp and encodes 479 amino acids, which includes 41 residues of a putative signal peptide at its N terminus. The amino acid sequence shares the highest similarity (80%) to the endo-1,4-${\beta}$-xylanase from Streptomyces coelicolor A3, which belongs to the glycoside hydrolase family 10. The gene fragment encoding the mature xylanase was expressed in Escherichia coli BL21 (DE3). The recombinant protein was purified to homogeneity by acetone precipitation and anion-exchange chromatography, and subsequently characterized. The optimal pH and temperature for the purified recombinant enzyme were 7.8 and $60^{\circ}C$, respectively. The enzyme showed stability over a pH range of 4.0-10.0. The kinetic values on oat spelt xylan and birchwood xylan substrates were also determined. The enzyme activity was enhanced by $Fe^{2+}$ and strongly inhibited by $Hg^{2+}$ and SDS. The enzyme also showed resistance to neutral and alkaline proteases. Therefore, these characteristics suggest that SfXyn10 could be an important candidate for protease-resistant mechanistic research and has potential applications in the food industry, cotton scouring, and improving animal nutrition.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.23-25
• /
• 2001

In this work, the $Ta_2O_5$ thin films were deposited on Pt/n-Si substrate by reactive magnetron sputtering and the RTA treatment at temperatures range from 650 to $750^{\circ}C$ in $O_2$ and vacuum. X-ray diffraction analysis, FE SEM, dielectric properties and leakage current density have been used to study the structural and electrical properties of the $Ta_2O_5$ thin films. XRD result showed that as- deposited films were amorphous and the annealed films crystallized (<$700^{\circ}C$) into ${\beta}-Ta_2O_5$. The crystallinity increased with temperature in terms of an increase in the intensity of the diffracted peaks(${\beta}-Ta_2O_5$) and annealing in oxygen reduced defect dang1ing Ta-O bonds. As deposited $Ta_2O_5$ films show the leakage current density $10^{-7}$ to $10^{-8}$ (A/$cm^2)$ at low electric fields (<200 kV/cm) However, it was found leakage current density of $Ta_2O_5$ thin films decreased with $O_2$ ambient annealing. The dielectric constant of the as deposited $Ta_2O_5$ thin films was ${\varepsilon}_r$ $9{\sim}11$ but the dielectric constant was increased after RTA treatment in $O_2$ ambient more then in vacuum.

• Korean Journal of Agricultural Science
• /
• v.38 no.1
• /
• pp.17-23
• /
• 2011

This research was conducted to investigate the influence of application rate of liming fertilizers on changes in soil chemical properties and growth of 'Red Madness' petunia in plug production. To achieve this, dolomite (DO) with 0, 1.0, 3.5, 8.0 or 13.0 $g{\cdot}L^{-1}$ and calcium carbonate (CC) with 0, 2.0, 2.5, 3.0, 3.5, or 4.0 $g{\cdot}L^{-1}$ were incorporated into peatmoss + vermiculite (1:1, v/v) during the root substrates formulation. The treatments of 3.5 $g{\cdot}L^{-1}$ of DO and 2.5 or 3.0 $gL^{-1}$ of CC had acceptable ranges of pH and EC in soil solution such as 5.6~6.2 and 0.7~1.0 $dS{\cdot}m^{-1}$, respectively. The faster rising of pH was observed in root media containing CC rather than those of DO. This indicates that the solubility of CC is higher than DO. The soil Ca concentrations in all treatments of CC were 1.8 times as high as those of DO. The treatments of 3.5 or 8.0 $g{\cdot}L^{-1}$ of DO had the highest soil Mg concentrations, but all treatments of CC had lower soil Mg concentrations than control treatment indicating that additional application of Mg fertilizers are required. The elevated application rate of DO or CC resulted in the increase of fresh and dry weight. But plant heights were not influenced by application of liming fertilizers. The results of tissue analysis showed that application of DO or CC influenced the $PO_4{^-}P$, Ca and Mg contents, but not influenced the contents of other nutrients such as N, P, Fe, Mn, Zn and Cu.

• Smart Structures and Systems
• /
• v.12 no.1
• /
• pp.55-71
• /
• 2013

Structural health monitoring (SHM) is vital for detecting the onset of damage and for preventing catastrophic failure of civil infrastructure systems. In particular, piezoelectric transducers have the ability to excite and actively interrogate structures (e.g., using surface waves) while measuring their response for sensing and damage detection. In fact, piezoelectric transducers such as lead zirconate titanate (PZT) and poly(vinylidene fluoride) (PVDF) have been used for various laboratory/field tests and possess significant advantages as compared to visual inspection and vibration-based methods, to name a few. However, PZTs are inherently brittle, and PVDF films do not possess high piezoelectricity, thereby limiting each of these devices to certain specific applications. The objective of this study is to design, characterize, and validate piezoelectric nanocomposites consisting of zinc oxide (ZnO) nanoparticles assembled in a PVDF copolymer matrix for sensing and SHM applications. These films provide greater mechanical flexibility as compared to PZTs, yet possess enhanced piezoelectricity as compared to pristine PVDF copolymers. This study started with spin coating dispersed ZnO- and PVDF-TrFE-based solutions to fabricate the piezoelectric nanocomposites. The concentration of ZnO nanoparticles was varied from 0 to 20 wt.% (in 5 % increments) to determine their influence on bulk film piezoelectricity. Second, their electric polarization responses were obtained for quantifying thin film remnant polarization, which is directly correlated to piezoelectricity. Based on these results, the films were poled (at 50 $MV-m^{-1}$) to permanently align their electrical domains and to enhance their bulk film piezoelectricity. Then, a series of hammer impact tests were conducted, and the voltage generated by poled ZnO-based thin films was compared to commercially poled PVDF copolymer thin films. The hammer impact tests showed comparable results between the prototype and commercial samples, and increasing ZnO content provided enhanced piezoelectric performance. Lastly, the films were further validated for sensing using different energy levels of hammer impact, different distances between the impact locations and the film electrodes, and cantilever free vibration testing for dynamic strain sensing.