• 동굴
• /
• 제33권34호
• /
• pp.7-22
• /
• 1993

본 연구에서는 단양지역에 분포한 석회암동굴계의 수질에 대한 주요 원소와 미량 원소 그리고 오염실태를 살펴보았다. 풍화물에 존재하는 미량 원소가 기반암보다 수 배 내지 수 백배 이상 부하되어 있었다. TSD와 EC 등은 화강암의 지하수 보다 높은 경향이 있었고 pH는 중성 내지 알칼리성이었다. Ca와 Mg은 기반암에서 용탈되어 지하수로 용존된 것으로 50ppm이상을 함유하고 있다. Fe과 K은 다른 주요 원소보다 현저히 낮은 경향이 있었다. 주요 음이온인 F$^{-}$ , Cl$^{-}$ , NO$_3$$^{-}$ , SO$_4$$^{-}$ 등은 환경기준치 보다도 현저히 낮은 상태이며, 따라서 오염이 안된 상태로 볼 수 있다. 미량 원소중 Al, Sr, Ba등이 높은 반면에 Co, Mo, Sb, Cs, W, Pb, U, Mn 등은 매우 극소량으로 존재하는 것으로 나타났다. 연구지역 중 온달굴, 고수굴, 천동, 노동 등지는 오염이 거의 안된 상태로 매우 양호한 편이나 천동굴은 관광객으로 인하여 일부 원소가 오염되어 있는 실정이다.

• 한국분말재료학회지
• /
• 제14권6호
• /
• pp.367-371
• /
• 2007

P/M high speed steel (1.26% C, 4.42% Cr, 6.54% W, 4.92% Mo, 3.21 % V, 8.77% Co, bal. Fe) was applied to hot former die. It showed that the die life became 2.7 times higher than that of cast/wrought SKH 55 tool steel which is commercially used. The increase of die life was corresponding to the improved hardness and transverse rupture strength of PM high speed steel due to the finer grain and carbide as well as the uniform carbide distribution. The P/M high speed steel with the promoted die life could be an alternative to the conventional SKH55.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1995년도 춘계학술발표회 초록집
• /
• pp.141-145
• /
• 1995

석탄액화반응의 촉진을 위하여 기존에 사용되어 온 담지촉매는 coking, metal deposition, pore plugging의 문제로 인하여 촉매의 활성을 지속적으로 유지할 수 없으며 고가이기때문에 최근에는 이러한 문제점을 보완할 수 있는 고분산 균일촉매에 관한 연구가 집중적으로 수행되고 있다. 그러나 분산촉매 중에서도 고활성을 나타내는 Mo, Ni, Co 성분은 고가이므로 이를 대체할 수 있는 촉매로서 값이 싼 Fe 성분에 관심이 모아지고 있지만 현재로서는 자체활성이 상대적으로 낮으므로 퍼센트단위의 많은 양을 사용해야하는 문제점을 안고 있다고 할 수 있다.

• 한국자원식물학회지
• /
• 제3권2호
• /
• pp.115-121
• /
• 1990

In view of the results to have measured metallic elements which is included in 40 sorts of herb medicines and surveyed their distribution, ninekinds of metals including Co, Ce, Ga, 71, Cd, As, Sbr Bu. Pb, are never orlittle included in almost herb medicines. Other twenty four sorts of ele-ments (Mo, Sc, Be, V, Ni, Su, Se, Ba, Cr, Su, Ti, B, Li, Mg, Ca, Sr, Mnl Fe,Cu, Zn. p, Al, Na, K) are metals that are included in large quentities incomparison with others. Selagirellae Radix contains is kinds of metallicelements more then other herb medicines does. The content of elements ofinorganic metal differs greatly according to the part of herb medicines .

• 한국자원식물학회지
• /
• 제3권2호
• /
• pp.107-114
• /
• 1990

In view of the results to have measured metallic elements which is included in 45 sorts of herb medicines and surveyed their distribution, 8 kinds ofmetals including Co, Ge, Ga, TL, Cd, As, 8i, Pb, are never or little includedin almost herb medicines . Other twenty-five sorts of elements (Mo, Sc, Be, V,Ni, Sn, Se, Ba, Cr, Sb, Si, Ti, B, Li, Mg, Ca, Cr, Mn, Fe, Cu, Zn, p, Al, Na,K) are more or Less included in all herb Bedicines ana Na, Ca, p and K aremetals that are included in Large quentities in comrarison with others . Patri-uiae Radix Contains 7 kinds of metal lic elements more than other herb medicinesdoes .

• Journal of Magnetics
• /
• 제7권1호
• /
• pp.14-17
• /
• 2002

Magnetic multilayers of a ferromagnetic (FM)/insulator (I)/ferromagnetic (FM) structure have been studied to investigate magnetic exchange coupling between two FM layers. As the Mumetal $(Ni_{77}Fe_{14}Mo_{5}Cu_4$ wt%) growth temperature increases, the grain size and the surface roughness increase simultaneously. The smallest coupling field is obtained at $40^\circ{C}$ where the grain size is larger than that of the $20^\circ{C}$ sample. The exchange coupling field increases again at temperatures higher than $40^\circ{C}$ due to increase in the surface roughness of the Mumetal.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2015년도 자성 및 자성재료 국제학술대회
• /
• pp.98-98
• /
• 2015

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2004년도 추계학술대회
• /
• pp.96-98
• /
• 2004

At the previous papers, we showed that K2O-CaO-P2O5 glasses had a solubility in air so that they could be used for glass fertilizer. In this work, we fabricated the Eco-glass fertilizer containing trace elements such as B, Mg, Zn, Fe, Cu, Co, and Mo by a melt-quenching process and the dissolution properties of these glasses were investigated with pH meter and ICP analyzer. In case of the glasses containing the trace elements, effect of trace elements on the dissolutions is not obvious and ignorant the stability of mother glass. Also, the dissolution amounts of each trace elements depend on the mother glass composition and the quantity of each trace element, and mother glasses determined the dissolving velocity of chemical elements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.302-303
• /
• 2010

Generally, the high energy lithium ion batteries depend intimately on the high capacity of electrode materials. For anode materials, the capacity of commercial graphite is unlike to increase much further due to its lower theoretical capacity of 372 mAhg-1. To improve upon graphite-based negative electrode materials for Li-ion rechargeable batteries, alternative anode materials with higher capacity are needed. Therefore, some metal anodes with high theoretic capacity, such as Si, Sn, Ge, Al, and Sb have been studied extensively. This work focuses on ternary Si-M1-M2 composite system, where M1 is Ge that alloys with Li, which has good cyclability and high specific capacity and M2 is Mo that does not alloy with Li. The Si shows the highest gravimetric capacity (up to 4000mAhg-1 for Li21Si5). Although Si is the most promising of the next generation anodes, it undergoes a large volume change during lithium insertion and extraction. It results in pulverization of the Si and loss of electrical contact between the Si and the current collector during the lithiation and delithiation. Thus, its capacity fades rapidly during cycling. Si thin film is more resistant to fracture than bulk Si because the film is firmly attached to the substrate. Thus, Si film could achieve good cycleability as well as high capacity. To improve the cycle performance of Si, Suzuki et al. prepared two components active (Si)-active(Sn, like Ge) elements film by vacuum deposition, where Sn particles dispersed homogeneously in the Si matrix. This film showed excellent rate capability than pure Si thin film. In this work, second element, Ge shows also high capacity (about 2500mAhg-1 for Li21Ge5) and has good cyclability although it undergoes a large volume change likewise Si. But only Ge does not use the anode due to its costs. Therefore, the electrode should be consisted of moderately Ge contents. Third element, Mo is an element that does not alloys with Li such as Co, Cr, Fe, Mn, Ni, V, Zr. In our previous research work, we have fabricated Si-Mo (active-inactive elements) composite negative electrodes by using RF/DC magnetron sputtering method. The electrodes showed excellent cycle characteristics. The Mo-silicide (inert matrix) dispersed homogeneously in the Si matrix and prevents the active material from aggregating. However, the thicker film than $3\;{\mu}m$ with high Mo contents showed poor cycling performance, which was attributed to the internal stress related to thickness. In order to deal with the large volume expansion of Si anode, great efforts were paid on material design. One of the effective ways is to find suitably three-elements (Si-Ge-Mo) contents. In this study, the Si based composites of 45~65 Si at.% and 23~43 Ge at.%, and 12~32 Mo at.% are evaluated the electrochemical characteristics and cycle performances as an anode. Results from six different compositions of Si-Ge-Mo are presented compared to only the Si and Ge negative electrodes.

• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 2006

This work reviews the effects of catalyst formulation and exhaust gas composition on soot oxidation in CDPF (Catalytic Diesel Particulate Filter). DOC's (Diesel Oxidation Catalysts) have been loaded with Pt catalyst (Pt/$Al_{2}O_3$) for reduction of HC and CO. Recent CDPF's are coated with the Pt catalyst as well as additives like Mo, V, Ce, Co, Fe, La, Au, or Zr for the promotion of soot oxidation. Alkali (K, Na, Cs, Li) doping of metal catalyst tends to increase the activity of the catalysts in soot combustion. Effects of coexistence components are very important in the catalytic reaction of the soot. The soot oxidation rate of a few catalysts are improved by water vapor and NOx in the ambient. There are only a few reports available on the mechanism of the PM (particulate matter) oxidation on the catalysts. The mechanism of PM oxidation in the catalytic systems that meet new emission regulations of diesel engines has yet to be investigated. Future research will focus on catalysts that can not only oxidize PM at low temperature, but also reduce NOx, continuously self-cleaning diesel particulate filters, and selective catalysts for NOx reduction.