• Korean Journal of Materials Research
• /
• v.7 no.4
• /
• pp.287-294
• /
• 1997

(NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 합금에 Sn,Mo등을 첨가하여 그에 따른 미세구조와 열적안정성 및 자기적 특성 변화를 조사하였다. Sn과 Mo의 첨가는 (NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 합금리본의 큐리온도를 크게 향상시켰으며 자기특성, 특히 보자력을 1KOe이상 증가시켰다. 그리고 이러한 현저한 보자력 증가는 입계형 defect인 disturbed grain boundary defect에 기인하는 것이라 판단되었다. 또한 Sn과 Mo 첨가원소는 irreversible loss를 각각 4%와 6% 감소시켜 리본자석의 열적안정성을 향상시켰다. 이는 Sn과 Mo의 첨가가 보자력을 크게 증가시켰기 때문이다. 한편 (NdㆍDy)-(FeㆍCoㆍAIㆍM)-B 리본자석들의 열저항온도(heat resistance temperature)는 irreversible loss와 직선관계를 이루었다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.2
• /
• pp.143-150
• /
• 2002

The thermal behavior of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ prepared by a co-precipitation wasinvestigated for Hz generation by the thermochemical cycle. The reduction reaction of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ started from $480^{\circ}C$, and the weight loss was 1.6 wt% up to $1100^{\circ}C$. At this reaction, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ was reduced by release of oxygen bonded with the $Fe^{3+}$ ion in the B site of ($CO_{0.5}$ $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. In the $H_2O$ decomposition reaction, $H_2$ was generated by oxidationof reduced $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$. The crystal structure of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ for reduction reaction maintained spinel structure and the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ ($8.41\AA$) was enlarged to $8.45\AA$. But the lattice constant of $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ after $H_2O$ decomposition reaction did not change to $8.45\AA$. Then, $(Co_{0.5}\;Mn_{0.5})Fe_2O_4$ is excellent material in the thermochemical cyclic reaction due to release oxygen at low temperature for the reduction reaction and produce $H_2$ maintaining crystal structure for redox reaction.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.159-163
• /
• 2016

Antiferromagnet (AFM)/ferromagnet (FM) bilayer structures are widely used in the magnetic devices of sensor and memory applications, as AFM materials can induce unidirectional anisotropy of the FM material via exchange coupling. The strength of the exchange coupling is known to be sensitive to quality of the interface of the AFM/FM bilayers. In this study, we utilize proton irradiation to modify the interface structures and investigate its effect on the magnetic properties of AFM/FM structures, including the exchange bias and magnetic thermoelectric effect. The magnetic properties of IrMn/CoFeB structures with various IrMn thicknesses are characterized after they are exposed to a proton beam of 3 MeV and $1{\sim}5{\times}10^{14}ions/cm^2$. We observe that the magnetic moment is gradually reduced as the amount of the dose is increased. On the other hand, the exchange bias field and thermoelectric voltage are not significantly affected by proton irradiation. This indicates that proton irradiation has more of an influence on the bulk property of the FM CoFeB layer and less of an effect on the IrMn/CoFeB interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.232-232
• /
• 2010

정보화 산업의 발달은 DRAM, flash memory 등을 포함한 기존의 반도체 메모리 소자를 대체할 수 있는 차세대 메모리 소자에 대한 개발을 요구하고 있다. 특히 magnetic random access memory (MRAM)는 SRAM과 대등한 고속화 그리고 DRAM 보다 높은 기록 밀도가 가능하고 낮은 동작 전압과 소비전력 때문에 대표적인 차세대 비휘발성 메모리로 주목받고 있다. 또한 MRAM소자의 고집적화를 위해서 우수한 프로파일을 갖고 재증착이 없는 나노미터 크기의 magnetic tunnel junction (MTJ) stack의 건식 식각에 대한 연구가 선행되어야 한다. 본 연구에서는 고밀도 반응성 이온 식각법(Inductively coupled plasma reactive ion etching; ICPRIE)을 이용하여 재증착이 없이 우수한 식각 profile을 갖는 CoFeB과 IrMn 박막을 형성하고자 하였다. Photoresist(PR) 및 Ti 박막의 두 가지 마스크를 이용하여 HBr/Ar, HBr/$O_2$/Ar 식각 가스들의 농도를 변화시키면서 CoFeB과 IrMn 박막의 식각 특성들이 조사되었다. 자성 박막과 동일한 조건에 대하여 hard mask로서 Ti가 식각되었다. 좋은 조건을 얻기 위해 HBr/Ar 식각 가스를 이용 식각할 때 pressure, bias voltage, rf power를 변화시켰고 식각조건에서 Ti 하드마스크에 대한 자성 박막들의 selectivity를 조사하고 식각 profile을 관찰하였다. 식각 속도를 구하기 위해 alpha step(Tencor P-1)이 사용되었고 또한 field emission scanning electron microscopy(FESEM)를 이용하여 식각 profile을 관찰함으로써 최적의 식각 가스와 식각 조건을 찾고자 하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2006.11a
• /
• pp.28-29
• /
• 2006

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.6-11
• /
• 2016

The magnetic anisotropy energy (MAE) and the saturation magnetization $B_s$ of (110) $Fe_nCo_n$ heterostructures with n = 1, 2, and 3 are investigated in first-principles within the density functional theory by using the precise full-potential linearized augmented plane wave (FLAPW) method. We compare the results employing two different exchange correlation potentials, that is, the local density approximation (LDA) and the generalized gradient approximation (GGA), and include the spin-orbit coupling interaction of the valence states in the second variational way. The MAE is found to be enhanced significantly compared to those of bulk Fe and Co and the magnetic easy axis is in-plane in agreement with experiment. Also the MAE exhibits the in-plane angle dependence with a two-fold anisotropy showing that the $[1{\overline{I}}0]$ direction is the most favored spin direction. We found that as the periodicity increases, (i) the saturation magnetization $B_s$ decreases due to the reduced magnetic moment of Fe far from the interface, (ii) the strength of in-plane preference of spin direction increases yielding enhancement of MAE, and (iii) the volume anisotropy coefficient decreases because the volume increase outdo the MAE enhancement.

• Journal of Magnetics
• /
• v.10 no.4
• /
• pp.163-170
• /
• 2005

The RF integrated noise filters are fabricated by photolithography. The stack for the electromagnetic noise filters consists of the nano-granular ($Co_{41}Fe_{38}AI_{13}O_8$) soft magnetic film / $SiO_2$ / Cu transmission line / seed layer (Cu/Ti) / $SiO_2$-substrate. A good signal-attenuation feature along with a low signal-reflection feature is observed in the present filters. Especially in the noise filter incorporated with a $Co_{41}Fe_{38}AI_{13}O_8$ magnetic film with lateral dimensions of $2000{\mu}m$ wide, 15 mm long and $1{\mu}m$ thick, the maximum magnitude of signal attenuation reaches -55 dB, and the magnitude of signal reflection is below -10 dB in the overall frequency range. And this level of signal attenuation is much larger than that of a noise filter incorporated with a Fe magnetic film.

• Journal of Korea Foundry Society
• /
• v.24 no.6
• /
• pp.356-365
• /
• 2004

Mechanical properties and microstructures of the Ni-AI-Fe and Ni-AI-Fe-(B, Zr) alloys which containing $10{\sim}30at$.%Fe, 0.1at.%B and/or 0.1at.%Zr have been investigated. The experimental results showed that the microstructures of Ni25Al were changed from a single phase ${\gamma}$ to dual phase ${\gamma}$ and ${\beta}$ by addition of 27at.%Fe. Ni45Al, however, kept the single ${\beta}$ phase even though Fe was added upto 30at.%. The hardness of Ni25Al were increased from $H_RB$ 70 to $H_RC$ 39 by addition of 27at.%Fe. In the case of Ni45Al which have $H_RC$ 37, the hardness was decreased by lOat.%Fe addition, but increased with 30at.%Fe. The yield strength and ultimate compressive strength in the compressive test have showed a similar trend with the hardness change. The strain to fracture was 14% at maximum and achieved in Ni25Al-27at.%Fe and Ni25Al-27at.%Fe-0.1 at.%B alloys. The Ni45Al showed a relatively low strain to fracture as 4%. The impact absorption energy of Ni25Al increased from 0.74 kg-m to 1.81 kg-m by addition of 27at.%Fe. In case of Ni45Al, the addition of lOat.%Fe and lOat.%Fe with small amounts of Band Zr did not change significantly the impact absorption energy of 0.60 kg-m, whereas the addition of 30at.%Fe with small amounts of B and Zr increased it slightly. In fracture tests, both of two basic materials showed the same intergranular fracture but by adding Fe it changed to the cleavage fracture mode or co-existing of cleavage and intergranular fractures.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2000

Methane combustion over perovskite-type oxides prepared using the malic acid method was investigated. To enhance the catalytic activity, the perovskite oxides were modified by the substitution of metal into their A or B site. In addition, the reaction conditions, such as the temperature, space velocity, and partial pressure of the methane were varied to understand their effect on the catalytic performance. With the LaCoO3-type catalyst, the partial substitution of Sr or Ba into site A enhanced the catalytic activity in the methane combustion. With the LaBO3(B=Co, Fe, Mn, Cu)-type catalyst, the catalytic activities were exhibited in the order of Co>Fe Mn>Cu. Futhermore, the partial substitution of Co into site B enhanced the catalytic activity, whereas an excess amount of Co decreased the activity. The surface area and catalytic activity of the perovskite catalysts prepared using the malic acid method showed higher values than those prepared using the solid reaction method. The catalytic activity was enhanced with decreased methane concentration and with a decrease in the space velocity.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.5
• /
• pp.542-546
• /
• 1992

New silicon-monosubstituted (${\eta}^4$-2,3,4,5-tetraphenyl-1-silacyclopentadiene)transi tion metal complexes are described. The new (silole-transition metal complex)Fe$(CO)_3$ was obtained from the reaction of silole-tansition metal complex and Fe$(CO)_5$. We have determined the crystal structure of (${\eta}^4$-exo-cyclopentadienyldicarbonyliron-endo-1-meth yl-2,3,4,5-tetraphenyl-1-silacyclopentadienyl)tric arbonyliron by using graphitemonochromated Mo-$K_{\alpha}radiation. The compound was crystallized in the monoclinic space group $P2_1$/c with a = 8.925(1), b = 18.689(3), c = 19.930(3) ${\AA}$, and ${\beta}$ = 102.02$(1)^{\circ}$. The iron moiety CpFe$(CO)_2$ on silicon is in an axal position. The (silole-transition metal complex) Fe$(CO)_3$ was also prepared through the reaction of (${\eta}^4$-1-chloro-2,3,4,5-tetraphenylsilacyclopentadiene) Fe$(CO)_3$ and metal complex nucleophile. The structure configuration was studied by conventional spectroscopy.