• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.49-52
• /
• 2007

We investigated annealing effect of microforged powders on magnetic properties and electromagnetic absorption behaviors for ferromagnetic Fe-Cr metal alloy powder-polymer composites. The coercive properties greatly decreased with annealing temperature and the magnetic permeability had significantly increased after microforging and subsequent annealing treatment, due to a reduction in lattice strain of the microforged powders. The power loss in the far field regime also had greatly increased after microforging and subsequent annealing treatment in frequency range from 50 MHz to 6 GHz. As a result, the electromagnetic absorption of ferromagnetic Fe-Cr alloy metal powder-polymer composites was highly improved because of the relaxation of the internal strain during annealing process.

• Journal of the Korean Magnetics Society
• /
• v.17 no.1
• /
• pp.47-50
• /
• 2007

[ $ZnCr_2O_4$ ] shows geometrically frustrated magnet. Recently, $CoCr_2O_4$ has been investigated for multiferroic property and dielectric anomalies by spin-current model. Polycrystalline $CoCr_2O_4$ and $CoCrFeO_4$ compounds was prepared by wet-chemical process. Crystallographic and magnetic properties of $CoCr_2O_4$ and $CoCrFeO_4$ were investigate by using the x-ray diffractometer(XRD), vibrating sample magnetometer(VSM), superconducting quantum interference device magnetometer(SQUID), and $M\"{o}ssbauer$ spectroscopy. The crystal structure was found to be single-phase cubic spinel with space group of Fd3m. The lattice constants of $CoCr_2O_4$ and $CoCrFeO_4$ $a_0$ were determined to be 8.340 and 8.377 ${\AA}$, respectively. The ferrimagnetic transition temperature for the both samples were observed at 97 K and 320 K. The $M\"{o}ssbauer$ absorption spectra at 4.2 K show that the well developed two sextets are superposed with small difference of hyperfine field($H_{hf1}=507\;and\;H_{hf2}=492\;kOe$). Isomer shift values($\delta$) of the two sextets are found to be 0.33 and 0.34 mm/s relative to the Fe metal, respectively, which are consistent with the high spin $Fe^{3+}$ charge state.

• Journal of Surface Science and Engineering
• /
• v.52 no.5
• /
• pp.246-250
• /
• 2019

Nano-multilayered $Cr_{25.2}Al_{19.5}Si_{4.7}N_{50.5}$ films were deposited on the steel substrate by cathodic arc plasma deposition. They were corroded at $900^{\circ}C$ in $Ar/1%SO_2$ gas in order to study their corrosion behavior in sulfidizing/oxidizing environments. Despite the presence of sulfur in the gaseous environment, the corrosion was governed by oxidation, leading to formation of protective oxides such as $Cr_2O_3$ and ${\alpha}-Al_2O_3$, where Si was dissolved. Iron diffused outward from the substrate to the film surface, and oxidized to $Fe_2O_3$ and $Fe_3O_4$. The films were corrosion-resistant up to 150 h owing to the formation of thin ($Cr_2O_3$ and/or ${\alpha}-Al_2O_3$)-rich oxide layers. However, they failed when corroded at $900^{\circ}C$ for 300 h, resulting in the formation of layered oxide scales due to not only outward diffusion of Cr, Al, Si, Fe and N, but also inward movement of sulfur and oxygen.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.583-588
• /
• 2003

Cation exchange capacity of clay, white clay and zeolite was measured by the adsorption test for 3 different heavy metal (Cd, Cr, Zn) standard solutions whose concentrations were varied by 10, 20, 30 ppm and pH were varied by 3, 5, 7, 9, respectively. The adsorption rate of Cd and Zn increased with increasing pH and slowly increased with increasing pH above pH 5. However, adsorption rate of Cr did not increase with increasing pH. Especially, Cr adsorption rate of the mixture of clay and white clay at pH 5 showed an half decrease compared to that at pH 3. The adsorption rate of mixed heavy metal solutions was in the order of Cd, Zn > Cr; however, the order was changed by Fe>Pb, Cu>Cr>Zn>Cd in case of Cu, Fe and Pb addition.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.400-400
• /
• 2010

우리는 기본 진공 $10^{-11}\;Torr$의 UHV surface magneto-optical Kerr effect (SMOKE) 시스템을 quarter-wave plate를 사용하였던 기존의 방식에서 PEM (photo elastic modulator)를 사용하는 방식으로 장비의 기능을 향상시켰다. 기존 quarter-wave plate를 사용하는 방식의 경우 Kerr signal을 구하기 위해 편광자와 검광자를 수직으로 두어 광량을 0으로 만들어야 한다. 그러나 금속의 경우 대부분 가시광선 영역에서 큰 반사율 때문에 측정되는 광량이 편광자와 검광자를 거치면서 넓은 각도 범위에서 최소값을 갖기 때문에 정확한 영점을 잡는 데 한계가 있다. 이러한 단점을 해결하기 위하여 우리는 PEM을 이용한 위상변조방식을 사용하였다. 위상변조 방식은 Kerr signal과 관계된 양을 PEM을 이용하여 50 kH ($1{\omega}$)와 100 kH ($2{\omega}$)의 진동 주파수에 공조시키고 이를 Lock-in-amplifier를 사용하여 탐지하기 때문에 좋은 sensitivity를 얻을 수 있을 뿐 아니라 Kerr ellipticity와 Kerr rotation을 동시에 측정할 수 있다. 자화에 필요한 전자석은 순철로 된 코어를 제작하여 챔버에 부착하였고 10 A에서 최대 7 kOe의 고자장을 얻을 수 있어 포화자화가 큰 물질에 대해서도 필요한 자성영역까지 측정이 가능하게 하였다. 또 저온 측정을 위해 SMOKE 샘플 홀더를 개조하여 액체 질소를 이용하여 100 K 근방의 영역에서 온도를 제어할 수 있도록 저온 장치를 구성하였다. 여기에서 샘플 근처에 위차한 e-beam heater가 장착된 고온 부분과 액체 질소 냉각, 온도감지를 위한 센서, cartridge heater가 장착된 저온 부분을 sapphire plate로 분리하여 저온용 cartridge heater의 파손을 최소화하였다. 이러한 SMOKE 시스템을 구성한 후에 우리는 Fe/Cr(001)시스템의 자성특성에 대해 연구하였다. Fe/Cr 시스템은 Fe/Cr/Fe의 exchange coupling이나 bulk Cr의 복잡한 자성 특성 때문에 주목을 받아왔다. 이 연구에서 우리는 저온 및 상온에서 Cr(001) 단결정 위에 증착된 Fe 박막의 자성 특성을 보고한다.

• Journal of Environmental Impact Assessment
• /
• v.28 no.3
• /
• pp.332-345
• /
• 2019

The purpose of the study is to evaluate the treatability of contaminated groundwater with TPH and (or) $Cr^{6+}$. Laboratory scale tests were performed for oil/water separation, dissolved air flotation (DAF), coagulation and precipitation, and filtration with sand and activated carbon respectively. Two times of oil/water separation tests for total 40 minutes of separation or separating time shows 90.2 % of TPH removal rate. In case of DAF test for high TPH sample, the TPH removal rates were not varied significantly by the variation of microbubble size. However, tests for low TPH samples show that TPH removal rate increases as microbubbles are smaller. When coagulant was added to sample for DAF test, TPH removal rate was increased 12.3 %. SS removal rate by DAF was 97.9 % at $16-40{\mu}m$ and it was increased as the size of microbubble is reduced. Tests for coagulation and precipitation were performed to evaluate the removal of $Cr^{6+}$ in groundwater. The increase of $FeSO_4$ dosage increased $Cr^{6+}$ removal rate in the coagulation and precipitation process. As the amount of activated carbon in the filter media increased TPH removal rate in the filtration process. SS removal rate by the filtration was 96.7 % similar to the results of DAF process tests. The filtration process treats TPH and SS. Best design parameters are determined as the size of sand is $425-850{\mu}m$ and the ratio of activated carbon and sand is 50:50.

• Cement
• /
• s.87
• /
• pp.48-50
• /
• 1982

화학적인 면에서 황색 clinker를 생성하는 근본원인은 $Fe^{3+}$이온이 $Fe^{3+}$이온으로 되거나, $Mg^{2+}$이온이 $Fe^{3+}$에 작용할수 없는 경우다. 이러한 원인이 생기는 공정상의 요인으로는 전체적 또는 부분적인 환원분위기, 화염접촉 및 과소, 원료에 산화물이 함유된 경우, 서냉 또는 1,250$^{\circ}C$이하에서 냉각, 기타 MgO, $MnO_2$, $Cr_2O_3$, $TiO_2$ 등 미량성분의 경향을 들 수 있다. 환원분위기의 경우에는 free CaO의 증가, $C_3S$의 감소로 인한 강도저하와 $C_3A$ 증가, $C_4AF$ 감소에 의한 조기 경화를 초래하게 되어 품질이 저하된다.

• Journal of Magnetics
• /
• v.12 no.4
• /
• pp.137-140
• /
• 2007

We have studied the temperature dependent magnetic properties and crystalline phase transitionn in small amount Fe doped nickel chromite. The Crystalline structure of $NiCr_{1.7}Fe_{0.3}O_4$ is spinel cubic (Fd-3m) structure with a lattice constant $a_0=8.317\AA$ at room temperature. The magnetic $N\acute{e}el$ temperature $(T_N)$ of the Fe doped nickel chromite sample is determined to be 250 K. The $M\ddot{o}ssbauer$ spectra exhibit that there are two magnetic phases with the two different sites for the $Cr^{3+}$ ions. The spectrum at 4.2 K is fitted to two magnetic components of the magnetic hyperfine fields $H_{hf}=496$ and 485 kOe. From the spectrum at 295 K, the electric quadrupole splittings are observed with large values of 0.49 and 0.50 mm/s, respectively. The values of the isomer shifts at all temperature ranges show that the Fe ions are ferric states. We are suggested that the dynamic Jahn-Teller distortion and anisotropic magnetic relaxation effects due to the crystalline phase transition.

• Journal of the Korean Society for Heat Treatment
• /
• v.24 no.1
• /
• pp.37-44
• /
• 2011

High temperature wear of AlCrN coated tool steels sliding against the ultra-high strength boron steels used for hot press forming has been studied. The sliding wear tests have been carried out using a pin-on-disc of configuration under applied normal load of 50 N for 20 min with heating the ultra-high strength boron steels up to $800^{\circ}C$. Characterizations of tribolayers formed on the contacting surfaces between the tribopairs of the AlCrN coated tool steels and the ultra-high strength boron steels have been studied. It was found on the tribolayers of the AlCrN coated tool steels that microcracking and oxides containing Fe and Cr to increase friction coefficient were formed at the early stage of sliding wear, followed by the generation of the smeared oxide layers containing Fe transferred from the tribopair to decrease friction coefficient. This may mainly contribute to very low specific wear rate of the AlCrN coated tool steels sliding against the ultra-high strength boron steels, resulting from oxideoxide contact between the tribopair.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.50.2-50.2
• /
• 2008