• Journal of the Korean institute of surface engineering
• /
• v.40 no.6
• /
• pp.250-253
• /
• 2007

Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of SKD 11 steel. Plasma nitrocarburizing was conducted for 12 h at $520^{\circ}C$ in the nitrogen, hydrogen and methane atmosphere to produce the $\varepsilon-Fe_{2-3}(N,C)$ phase. It was found that the compound layer produced by plasma nitrocarburising was predominantly composed of $\varepsilon-phase$, with a small proportion of $\gamma'-Fe_4(N,C)$ phase. The thickness of the compound layer was about $5{\mu}m$ and the diffusion layer was about $150{\mu}m$ in thickness, respectively. Plasma post oxidation was performed on the nitrocarburized samples with various oxygen/hydrogen ratio at constant temperature of $500^{\circ}C$ for 1 hour. The very thin magnetite($Fe_3O_4$) layer $1-2{\mu}m$ in thickness on top of the compound layer was obtained by plasma post oxidation. It was confirmed that the corrosion characteristics of the nitrocarburized compound layer could be further improved by the application of the superficial magnetite layer.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.858-863
• /
• 1995

The nitrogenation process and magnetic properties of $Sm_{2}Fe_{17}N_{x}\;(0{\leq}x{\leq}3)$ were investigated. During the initial nitrogenation process, the nitrogen content had linear relation with the square root of nitrogenation time, and the activation energy for the process was calculated to be 102.4 kJ/mol. The magnetic properties of $Sm_{2}Fe_{17}N_{x}$ were strongly dependent on the nitrogen content and the composition having $Sm_{2}Fe_{17}N_{2.8}$ showed optimum magnetic properties with a Curie temperature of 450 oC. The intrinsic magnetic properties of the nitride at room temperature were $M_{s}=1147\;emu/cm^{3},\;K_{1}=4.6{\times}10^{7}erg/cm^{3},\;K_{2}=6.0{\times}10^{7}erg/cm^{3}\;and\;H_{A}=290\;kOe$, respectively.

• Korean Journal of Community Nutrition
• /
• v.21 no.6
• /
• pp.574-579
• /
• 2016

Objectives: Vitamin C has various functions such as antioxidative effect and supporting absorption of iron (Fe). Aim of this present study was to provide vitamin C nutrition information and to briefly evaluate absorption interaction of vitamin C and Fe content of vitamin C emphasized products. Methods: Vitamin C emphasized foods including beverages, cereal, snacks, chocolate products, other cocoa products, and sugary products were examined by HPLC. Fe contents in samples after dry-ashing were examined by ICP. Results: Vitamin C content ranges in various products tested were the following: beverages (n=11) $20.15{\pm}0.08{\sim}845.41{\pm}6.07mg$, cereal (n=11) $52.50{\pm}0.23{\sim}262.50{\pm}0.07mg$, snacks (n=1) $50.00{\pm}0.25mg$, chocolate products (n=1) $311.73{\pm}2.44mg$, other cocoa products (n=1) $311.73{\pm}2.44mg$, other sugary products (n=2) $52.50{\pm}0.23{\sim}262.50{\pm}0.07mg$. Vitamin C (n=27) analysis values ranged from 82 to 450% of the labeled value. Vitamin C content in vitamin C emphasized food (n=6) was estimated 7.7 times~56.6 times more than Fe content. Conclusions: Analyzed samples ranged more than 80% of the labeled value in vitamin C emphasized products, which complied with food labeling regulation. But, beverages (n=3), cereal (n=4), chocolate products (n=1) were 2 times more than the labeled value. To provide accurate nutrition information, food manufactures should supervise nutrition labeling and understand the interactions between nutrients. Also, consumer should decide about the adequate amount of nutrient intake by thoroughly checking nutrition labeling.

• Journal of the Korean Magnetics Society
• /
• v.22 no.3
• /
• pp.79-84
• /
• 2012

Nano-magnetic materials such as iron-nitrides have been actively studied as an alternative to the application of high density, high performance needs for next generation information storage and also alternative to the rare earth and neodymium magnet. $Fe_4N$ is the basic materials for magnetic storage media and is one of the important magnetic materials in focus because of its higher magnetic recording density and chemical stability. Single phase ${\gamma}^{\prime}-Fe_4N$ nanoparticles have been prepared by a PAD (Plasma Arc Discharge) method and nitriding in a $NH_3-H_2$ mixed gases at temperature, $400^{\circ}C$ for 4 hrs. Also $Fe_{17}Sm_2N_x$ powders were synthesized by nitriding after reduction/diffusion of $Fe_{17}Sm_2$ to compare the magnetic properties with nano-sized $Fe_4N$ particles. The saturation magnetization of $Fe_4N$ and $Fe_{17}Sm_2N_x$ were 149 and 117 emu/g, respectively, but the coercive force was considerably smaller than that of bulk or acicular $Fe_4N$.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.720-725
• /
• 1998

As a basic study on the production of $Sm_{2}Fe_{17}N_{x}$ system rare earth permanent magnet by the reduction and diffusion(R- D) process, firstly the reduction reaction of $Sm_2O_3$ by metallic Ca and diffusion of Sm into Fe powder was investigated for the production the $Sm_{2}Fe_{17}$intermetallic compound. We concluded that the former case was very rapidly completed under the high temperature greater than 100$0^{\circ}C$ and the latter case of completion of diffusion reaction of Sm into the center of Fe powder(perfect homogenization condition) was required through 3h R- D reaction at 110$0^{\circ}C$ and identified as a rate determining step(RDS) on the whole reaction. Though $SmFe_2,SmFe_3$, and $Sm_{2}Fe_{17}$phases in the growth of phases of intermetallic compound in the Sm - Fe binary system were obseved below 100$0^{\circ}C$, but only $Sm_{2}Fe_{17}$phase was observed at lIOO$^{\circ}C$. Oxygen and Ca contents of the final sample in this work were 0.72wt% and O. 11 wt% respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.7 no.3
• /
• pp.206-218
• /
• 1994

In 50%$NH_3+Air+N_2$ atmospheres, the effect of air additions on the growth characteristics of the compound layer during oxynitriding at $570^{\circ}C$ for 2hr in carbon and alloy steels has been investigated. The ammount of apparent residual ammonia during oxynitriding has shown to be increased with air additions(9~36 Vol. %) and X-ray diffraction analysis of case oxynitreded has shown that the compound layer consist of ${\varepsilon}-Fe_{2-3}$(N, C) phase and ${\gamma}^{\prime}-Fe_4$(N,C) phase. In the case of carbon steels, the thickness of oxide layer, compound layer and porous layer and the amount of ${\varepsilon}-Fe_{2-3}$(N,C) phase in the compound layer were increased with additions of air in 50%$NH_3+N_2$ atmospheres. At the same gas composition, the thickenss of oxide layer, compound layer and porous layer in alloy steels showed slightly thin layer thickness compared to those of carbon steels and the ${\gamma}^{\prime}-Fe_4$(N,C) phase in the compound layer of alloy steels was found barely. Therefore, the most obvious effect of air addition in the gas nitriding atmosphere has been found to in crease further kinetics of nitriding reaction.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.94-100
• /
• 1993

Electronic and magnetic properties of the novel rare-earth permanent magnet, $Sm_{2}Fe_{17}N_{3}$, are investigated by performing self-consistent local density functional electronic structure calculations. Employing the LMTO(Linearized Muffin-Tin Orbital) band method, we have obtained the electronic band structures for both paramag-netic and ferromagnetic phases of $Sm_{2}Fe_{17}N_{3}$. Based on the energy band structures, we have studied bonding ef-fects among Sm, Fe, and N atom as well as electronic and magnetic structures. It is found that the N atom sub-stantially reduces the magnetic moment of neighboring Fe atoms through the hybridization interaction and also plays a role in stabilizing the structure. the average magnetic moment of Fe atoms in the ferromagnetic phase of $Sm_{2}Fe_{17}N_{3}$ is estimated to be $2.33{\mu}_B$, which is ~8% larger than the magnetic moment of $Sm_{2}Fe_{17}$, $2.16{\mu}_B$. The Fe I (c) atom, which is located farthest from the N atom and surrounded by 12 Fe nearest neighbors, has the largest magnetic moment ($2.65{\mu}_B$), while the Fe III (f), whose hybridization interaction with N atom is very strong, has the smallest magnetic moment($1.96{\mu}_B$).

• Korean Journal of Materials Research
• /
• v.14 no.4
• /
• pp.265-269
• /
• 2004

Plasma nitrocarburising and post oxidation were performed on SCM435 steel by a pulsed plasma ion nitriding system. Plasma oxidation resulted in the formation of a very thin ferritic oxide layer 1-2 $\mu\textrm{m}$ thick on top of a 15～25 $\mu\textrm{m}$ $\varepsilon$-F $e_{2-3}$(N,C) nitrocarburized compound layer. The growth rate of oxide layer increased with the treatment temperature and time. However, the oxide layer was easily spalled from the compound layer either for both oxidation temperatures above $450^{\circ}C$, or for oxidation time more than 2 hrs at oxidation temperature $400^{\circ}C$. It was confirmed that the relative amount of $Fe_2$$O_3$, compared with $e_3$$O_4$, increased rapidly with the oxidation temperature. The amounts of ${\gamma}$'-$Fe_4$(N,C) and $\theta$-$Fe_3$C, generated from dissociation from $\varepsilon$-$Fe_{2-3}$ /(N,C) phase during $O_2$ plasma sputtering, were also increased with the oxidation temperature.e.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.41-47
• /
• 1999

$Buffer/[NiFe/Cu/CoFe(Co)/Cu]_N$ spin valve multilayers prepared by dc magnetron sputtering on a corning glass substrate using NiFe and CoFe(Co) posses different coercivities. Dependence of magnetoresistance on the type and thickness of buffer layer, thickness of Cu, NiFe, stacking number of multilayer, substrate temperature and annealing temperature in the form $[NiFe/Cu/CoFe(Co)/Cu]_N$ spin-valve multilayers were investigated. To evaluate effect of magnetoresistance for this samples, X-ray diffraction analysis, vibrating sample magnetometer analysis, and magnetoresistance measurement (4-probe method) were performed the maximum magnetoresistance ratio and coercivity were 7.5 % and 140 Oe, respectively for $Cr-50{\AA}/[NiFe-20{\AA}/Cu-{\AA}/Co-20{\AA}/Cu-50{\AA}]_10$ at substrate temperature of 9$0^{\circ}C$. Magnetoresistance slope maintained 0.25%/Oe until 15$0^{\circ}C$ of annealing temperature, and then decreased to 0.03%/Oe at 20$0^{\circ}C$. It was confirmed that the main factor of thermal stability was deteriorating of soft magnetic properties in the NiFe layer.

• Journal of the Korean Magnetics Society
• /
• v.6 no.5
• /
• pp.317-322
• /
• 1996

Thin films of Fe-Zr-N were fabricated by rf magnetron reactive sputtering method. The saturation magnetization and coercivity as functions of annealing temperature and partial pressure of nitrogen gas, effective permeability at high frequencies, and thermal stability were investigated. Magnetic softness was exhibited in the composition range of $Fe_{72-78}Zr_{7-10}N_{15-18}$ which was boundary between polycrystalline and amorphous structure. These films exhibited magnetic softness with saturation magentic flux density of 1.55 T and effective permeability of about 3000 at 1 MHz. These films also exhibited thermal stability by sustaining effective permeability of 2500 or above as the temperature was raised to $550^{\circ}C$. It is asswned that good magnetic softness is obtained because grain growth of $\alpha-Fe$ is prohibited due to the precipitation of ZrN nanocrystals. The grain sizes of $\alpha-Fe$ films were $40~50\AA$ and the grain sizes of ZrN nanocrystals were $10~15\AA$.