• Journal of the Korean Vacuum Society
• /
• v.16 no.4
• /
• pp.262-266
• /
• 2007

Polycrystalline $Mn_xFe_{3-x}O_4$ thin films were synthesized on Si(100) substrates using sol-gel method and the effects of Mn substitution on the structural, magnetic, and magnetotransport properties were analyzed. X-ray diffraction revealed that cubic structure is maintained up to x = 1.78 with increasing lattice constant for increasing x. Such increase of the lattice constant is attributable to the substitution of $Mn^{2+}$ (with larger ionic radius) ions into tetrahedral $Fe^{3+}$(with smaller ionic radius) sites. VSM measurements revealed that $M_s$ does not vary significantly with x, qualitatively explainable by comparing spin magnetic moments of Mn and Fe ions. On the other hand, $H_c$ was found to decrease with increasing x, attributable to the decrease of magnetic anisotropy due to the decrease of $Fe^{2+}$ density through $Mn^{2+}$ substitution. Magnetoresistance (MR) of the $Mn_xFe_{3-x}O_4$ films was found to decrease with increasing x. Analysis of the MR data in comparison with the VSM results gives an indication of the tunneling of spin-polarized carriers through the grain boundaries of the polycrystalline samples at low external field and spin-flip of the carriers at high external field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.303-303
• /
• 2008

$LiMn_2O_4$는 출력특성이 좋고 가격이 저렴하지만 전해액 중에서 $Mn^{2+}$이 용출되어 나오는 것과 반복적인 충방전시 구조가 파괴되는 단점이 있어 이것을 보완하고자 $FePO_4\cdot2H_2O$를 $LiMn_2O_4$의 표면에 코팅하였다, $LiMn_2O_4$를 모재로, $FePO_4\cdot2H_2O$를 코팅재로 사용하여 $FePO_4\cdot2H_2O$의 코팅량 변화와, 열처리 온도변화에 따른 물성 변화를살펴보았다, LiOH 와 $MnO_2$의 혼합물을 $1000^{\circ}C$ 에서 소성하여 $LiMn_2O_4$를 합성하고, Fe$(NO_3)_3$ 수용액과 $NH_4H_2PO_4$ 수용액을 혼합하여 $FePO_4\cdot2H_2O$를 제조하였다, $LiMn_2O_4$에 $FePO_4\cdot2H_2O$를 1wt%, 2wt%, 3wt% 비율로 ball milling 을 통해 코팅한 후, 온도를 변화시키면서 열처리 하였다. 코팅한 물질을 XRD를 통해 구조를 분석하고 SEM을 이용하여 형상을 관찰하였다. 또한 고온에서의 $Mn^{2+}$의 용출량을 ICP로 측정하고 half-cell을 만들어 충방전 test를 통해 충방전 특성을 조사하였다. 아울러, 코팅량과 열처리 온도 등 합성변수들이 소재특성 및 전기화학적 특성에 미치는 영향을 조사하였다.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.40-45
• /
• 2016

Nickel substituted nano-sized ferrite powders, $Co_{1-x}Ni_xFe_2O_4$, $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$), were fabricated using a sol-gel method, and their crystallographic and magnetic properties were subsequently compared. The lattice constants decreased as quantity of nickel substitution increased, while the particle size decreased in $Co_{1-x}Ni_xFe_2O_4$ ferrite but increased for the $Mn_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites. For the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-x}Ni_xFe_2O_4$ ($0.0{\leq}x{\leq}0.2$) ferrite powders, the $M{\ddot{o}}ssbauer$ spectra could be fitted as the superposition of two Zeeman sextets due to the tetrahedral and octahedral sites of the $Fe^{3+}$ ions. However, the $M{\ddot{o}}ssbauer$ spectrum of $Mn_{0.8}Zn_{0.1}Ni_{0.1}Fe_2O_4$ consisted of two Zeeman sextets and one single quadrupole doublet due to the ferrimagnetic and paramagnetic behavior. The area ratio of the $M{\ddot{o}}ssbauer$ spectra could be used to determine the cation distribution equation, and we also explain the variation in the $M{\ddot{o}}ssbauer$ parameters by using this cation distribution equation, the superexchange interaction and the particle size. The saturation magnetization decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. The coercivity decreased in the $Co_{1-x}Ni_xFe_2O_4$ and $Mn_{1-2x}Zn_xNi_xFe_2O_4$ ferrites but increased in the $Mn_{1-x}Ni_xFe_2O_4$ ferrite with nickel substitution. These variations could thus be explained by using the site distribution equations, particle sizes and spin magnetic moments of the substituted ions.

• Korean Journal of Materials Research
• /
• v.6 no.1
• /
• pp.90-98
• /
• 1996

Mn((Cu0.66AI0.34)1-x(Bi0.3Sb0.7)x) 및 Mn((Fe0.66AI0.34)1-x(Bi0.3Sb0.7)x) 합금계의 상의 변화와 자기적 특성을 조사하였다. Mn((Cu, SI)(Bi, Sb)) 합금계는 Bi상, MnSb상, MnBi상, k-상, Heuser상, Mn2Sb 및 $\beta$-Mn상의 혼합상으로 이루어졌으며 x가 증가함에 따라 Bi상과 Mn2Sb상이 증가하고 K-상, Heusler상 및 $\beta$-Mn상이 줄어들거나 사라졌다. 자기적 성질은 자성을 띄는 MnSb상, MnBi상, Mn2Sb상, k-상 및 Hseusler상과 비자성인 Bi상과 $\beta$-Mn상의 상대적 분율에 의해 결정됨을 알 수 있었고, 150K-200K 부근에서 그 이하로 온도가 감소함에 따라 자화값이 급격히 감소하는 현상이 나타났다. Mn((Fe, AI)(Bi, Sb))합금계는 Bi상, MnSb상, MnBi상, MnBi상,$\beta$-Mn상, k-상 및 Mn2Sb상의 혼합상으로 나타났으며, 자기적 성질은 조사한 전 조성에서 강자성을 띄고 있음을 알 수 있었다.

• Corrosion Science and Technology
• /
• v.21 no.1
• /
• pp.53-61
• /
• 2022

Alloys of Fe-(5.3-29.8)%Mn-(1.1-1.9)%Al-(0.4-0.5)%C were oxidized at 550 ℃ to 650 ℃ for 20 h to understand effects of alloying elements on oxidation. Their oxidation resistance increased with increasing Mn level to a small extent. Their oxidation kinetics changed from parabolic to linear when Mn content was decreased and temperature was increasing. Oxide scales primarily consisted of Fe₂O₃, Mn₂O₃, and MnFe₂O₄ without any protective Al-bearing oxides. During oxidation, Fe, Mn, and a lesser amount of Al diffused outward, while oxygen diffused inward to form internal oxides. Both oxide scales and internal oxides consisted of Fe, Mn, and a small amount of Al. The oxidation of Mn and carbon transformed γ-matrix to α-matrix in the subscale. The oxidation led to the formation of relatively thick oxide scales due to inherently inferior oxidation resistance of alloys and the formation of voids and cracks due to evaporation of manganese, decarburization, and outward diffusion of cations across oxides.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.302-307
• /
• 2012

Advanced oxidation processes (AOP) such as O3/activated carbon process and O3/catalysts process were used to compare the decomposition of phenol. Catalysts such as Pd/activated carbon (Pd/AC), Mn/activated carbon (Mn/AC), Co/activated carbon (Co/AC) and Fe/activated carbon (Fe/AC) were prepared by impregnation of Pd, Mn, Co and Fe into the activated carbon of pellet form, respectively. Based on an hour of reactions, the following descending order for the decomposition ratios of dissolved O3 to the 1.48 mg/L of saturated dissolved O3 was observed: Mn/AC (45%) > Pd/AC (42%) > Co/AC (33%) > AC (31%) > Fe/AC (27%). The removal efficiencies of phenol were also arranged in the descending order of AOP as follows: Mn/AC (89%) > Pd/AC (85%) > Co/AC (77%) > AC (76%) > Fe/AC (71%). The remaining ratios (C/Co) of TOC (total organic carbon) after an hour of experiments were arranged in the ascending order of AOP as follows : Pd/AC (0.29) < Mn/AC (0.36) < AC (0.40) < Co/AC (0.49) < Fe/AC (0.51). However, the catalytic effects in the Co/AC and the Fe/AC processes were little in comparison with O3/AC process. The maximum concentrations of intermediates such as hydroquinone and catechol formed from the decomposition of phenol were arranged in the ascending order of AOP as follows: Pd/AC < Fe/AC < Co/AC < AC < Mn/AC. In the case of Pd/AC process, these intermediates were almost disappeared after an one hour of reaction.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.11a
• /
• pp.30-31
• /
• 1997

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.552-555
• /
• 1995

The magnetic properties of Mg-Mn ferrites were investigated in the composition range of $Mg_{a}Mn_{b}Fe_{c}O_{4\pm\delta}$ (a+b+c=3) with the addition of $Al_{2}O_{3}$. In $MgO-MnO-Fe_{2}O_{3}$ ternary system, the spinel single phase existed within the composition range of MgO-50 mol%, MnO-70 mol% and $Fe_{2}O_{3}-60\;mol%$. The saturation magnetic flux density increased with the increase of $Fe_{2}O_{3}$ content and showed the maximum at the stoichiometric composition of $(Mg,Mn)Fe_{2}O_{4}$. In $Mg_{x}Mn_{1-x}Fe_{2}O_{4}(x=0.2~0.8)$ system, the saturation magnetic flux density showed the maximum at $Mg_{0.2}Mn_{0.8}Fe_{2}O_{4}$. The addition of $Al_{2}O_{3}$ resulted in the decrease of saturation magnetic flux density but increased the electrical resistivity.

• Journal of the Korean Vacuum Society
• /
• v.8 no.3A
• /
• pp.213-217
• /
• 1999

Fe/MnO multilayers with different bilayer thicknesses were grown by pulsed laser deposition method. Grazing incidence X-ray reflectivity results showed obvious multilayer Bragg peaks implying highly layered samples and, through their analysis, some structural parameters were quantiatively estimated. From the X-ray diffraction peak corresponding to MnO(111), Mn-oxide turned out to be dominantly MnO. To characterize the magnetic properties of $Mn^{+2}$, XMCD were carried out. Magnetic moments of MnO near interfaces were ordered in the opposite direction to those of Fe.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.3
• /
• pp.183-192
• /
• 2004

This pot experiment was conducted to investigate the effects of systematic variation application of Fe, Mn, Cu, and Zn on forage performance of orchardgrass and white clover. The treatments of systematic variation were 0/100, 25/75, 50/50. 75/25, and $100/0\%$ in the Fe/Cu(trial-1). Mn/Zn(trial-2), and Fe+Cu/Mn+Zn(trial-3), respectively The treatments of Fe/Mn/Cu/Zn(trial-4) were composed of $70\%$ for main element and $10\%$ for other 3 elements, respectively. 1. The contents of N-compounds in forages tended to be in inverse proportion to the yields. In the Mn/Zn trial, the 0/l00 to white clover resulted in the relatively high contents of soluble N-compounds and low ratio of pure protein/soluble N-compounds in company with a severe yield decrease. 2. In the Fe+Cu/Mn+Zn trial, the 0/100 and 100/0 resulted in the somewhat high contents of N-compounds in white clover. It was likely to be caused by the concentration effect derived from yield decrease. In addition, the 100/0 resulted in the relatively high content of soluble N-compounds and low ratio of pure protein/soluble N-compounds. The protein synthesis in white clover was likely to be negatively influenced by the 100/0. 3. In the Fe/Mn/Cu/Zn trial, white clover showed the low contents of crude and pure protein at the 1st cut. It was likely to be caused by the unbalanced mutual ratios derived from the high application levels of each single element. 4. In white clover at the 5th cut, the 0/100 of Mn/Zn and 100/0 of Fe+Cu/Mn+Zn resulted in the relatively high content of K. It was likely to be caused by the concentration effect derived from yield decrease.