• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3521-3526
• /
• 2014

A magnetic sonophotocatalyst $Fe_3O_4@SiO_2@TiO_2$ is synthesized for the enhanced biodegradability of organophosphate pesticide. The as-prepared catalysts were characterized using different techniques, such as X-ray diffraction (XRD) and transmission electron microscopy (TEM). The radial sonophotocatalytic activity of $Fe_3O_4@SiO_2@TiO_2$ nanocomposite was investigated, in which commercial dichlorvos (DDVP) was chosen as an object. The degradation efficiency was evaluated in terms of chemical oxygen demand (COD) and enhancement of biodegradability. The effect of different factors, such as reaction time, pH, the added amount of catalyst on $COD_{Cr}$ removal efficiency were investigated. The average $COD_{Cr}$ removal efficiency reached 63.13% after 240 min in 12 L sonophotocatalytic reactor (catalyst $0.2gL^{-1}$, pH 7.3). The synergistic effect occurs in the combined sonolysis and photocatalysis which is proved by the significant improvement in $COD_{Cr}$ removal efficiency compared with that of solo photocatalysis. Under this experimental condition, the $BOD_5/COD_{Cr}$ ratio rose from 0.131 to 0.411, showing a remarkable improvement in biodegradability. These results showed that sonophotocatalysis may be applied as pre-treatment of pesticide wastewater, and then for biological treatment. The synthesized magnetic nanocomposite had good photocatalytic performance and stability, as when it was used for the fifth time, the $COD_{Cr}$ removal efficiency was still about 62.38%.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.414-422
• /
• 2002

Three different multi-component white cast irons alloyed with Cr, V, Mo and W were prepared in order to study their as-cast and solidification structures. Three combinations of the alloying elements were selected so as to obtain the different types of carbides and matrix structures : 3%C-10%Cr-5%Mo-5%W(alloy No.1), 3%C-10%V-5% Mo-5%W(alloy No. 2) and 3%C-17%Cr-3% V(alloy No.3). The as-cast microstructures were investigated with optical and scanning electron microscopes. There existed two different types of carbides, $M_7C_3$ carbide with rod-like morphology and $M_6C$ carbide with fishbone-like one, and matrix in the alloy No. 1. The alloy No. 2 consisted of MC carbide with chunky and flaky type and needle-like $M_2C$ carbide, and matrix. The chunky type referred to primary MC carbide and the flaky one to eutectic MC carbide. The morphology of the alloy No. 3 represented a typical hypo-eutectic high chromium white cast iron composed of rod-like $M_7C_3$ carbide which is very sensitive to heat flow direction and matrix. To clarify the solidification sequence, each iron(50g) was remelted at 1723K in an alumina crucible using a silicon carbide resistance furnace under argon atmosphere. The molten iron was cooled at the rate of 10K/min and quenched into water at several temperatures during thermal analysis. The solidification structures of the specimen were found to consist of austenite dendrite(${\gamma}$), $ ({\gamma}+ M_7C_3)$ eutectic and $({\gamma}+ M_6C)$ eutectic in the alloy No. 1, proeutectic MC, austenite dendrite(${\gamma}$), (${\gamma}$+MC) eutectic and $({\gamma}+ M_2C)$ eutectic in the alloy No. 2, and proeutectic $M_7C_3$ and $ ({\gamma}+ M_7C_3)$ eutectic in the alloy No 3. respectively.

• 한국수소및신에너지학회논문집
• /
• 제19권1호
• /
• pp.71-76
• /
• 2008

CuFeOx/$Al_2O_3$ catalysts are developed for the use in sulfuric acid decomposition which is a subcycle in thermochemical iodine-sulfur cycle to split water into hydrogen and oxygen. Both Cu and Fe components are co-precipitated with Al component to enhance distribution of active components. Developed catalysts are improved in the capability of sulfuric acid decomposition and endurance under highly acidic environment compared to commercial catalysts such as Pt/$Al_2O_3$ and $2CuO{\cdot}Cr_2O_3$. Developed CuFeAlOx catalysts exhibited higher sulfuric acid decomposition ability than $2CuO{\cdot}Cr_2O_3$ and longer endurance trends than Pt/$Al_2O_3$ maintaining comparable performance, respectively.

• 한국농공학회논문집
• /
• 제50권1호
• /
• pp.85-92
• /
• 2008

This study was carried out to estimate heavy metal loads at plain area of the rural watersheds during farming season in 2006. The experimental area was belonging to Geum River watershed. That was located at the center of South Korea. Water samples were corrected at two kinds of aspects. One is regular sampling(every two month) and the other is irregular sampling(every rainfall event). The result showed that heavy metal properties of regular samples were highest at May and June with lively agricultural activities. Heavy metal concentration of irregular samples was lower than that of regular samples. But the heavy metal loads of irregular samples were high. The correlation between each heavy metals of regular samples was following as Mn-Cd > Mn-Fe > Mn-Al > Fe-Al > Al-Cd. The correlation of irregular samples was following as Fe-AI > Zn-Mn > Fe-Cd > Cd-Al. Loading rates of daily discharge the plain area of designed rural watershed during farming season were Al 3.070 kg/day, Cu 0.526 kg/day, Fe 0.745 kg/day, Zn 0.314 kg/day, Cd 0.010 kg/day, Cr 0.055 kg/day, Mn 0.140 kg/day and Pb 0.098 kg/day. Loading rate of discharge with heavy metals during the survey period was Al(577.23 kg) > Fe(140.08 kg) > Cu(98.93 kg) > Zn(58.99 kg) > Mn(26.34 kg) > Pb(18.51 kg) > Cr(10.34 kg) > Cd(1.93 kg).

• 대한화학회지
• /
• 제43권4호
• /
• pp.412-417
• /
• 1999

실리콘 웨이퍼 중의 금속 불순물을 유도결합플라스마-질량분석기(ICP-MS)로 분석하기 위한 시료의 전처리 방법으로 마이크로파 분해법과 산분해법을 비교하였다 $HNO_3$-HF 혼합용액을 실리콘 웨이퍼 시료에 가하고 마이크로파 분해법과 산분해법으로 용해시킨 후, 용액의 실리콘 매트릭스는 증발 용기 안에서 Si-F의 형태로 증발시켜 분석하였다. 실제 시료에 spike한 Ni, Cr 및 Fe의 회수율은 두 전처리 방법에서 95∼106%였다. Cu의 경우는 산분해법이 회수율이 더 좋았고, Zn의 경우는 마이크로파 분해법으로 전처리 한 경우의 회수율이 더 좋았다. Spin coater로 Fe를 오염시킨 실리콘 웨이퍼를 산분해법과 마이크로파 분해법으로 전처리하여 ICP-MS로 분석한 결과, Fe의 농도는 위의 두 전처리 방법에서 거의 차이가 없었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권6호
• /
• pp.33-42
• /
• 2012

This study was performed to find the problems according to interference factors (organic matter, pH, Cr, Mn, Fe, clay, and etc.) when we analyzed the hexavalent chromium [Cr(VI)] in soils using UV/VIS spectrometer (US EPA 7196A), attempted to evaluate the domestic applicability of analytical method (US EPA 7199) using IC-UV/VIS spectrometer as alternative method. The recovery rate of certified reference materials was 75.0% (US EPA 7196A) and 101.4% (US EPA 7199) by the analytical methods. As the results of performing QA/QC about US EPA 7199, method detection limit (MDL) and limit of quantification (LOQ) were 0.062 mg/kg, 0.196 mg/kg, respectively. The LOQ of US EPA 7199 was lower than that of the current soil official testing method in Korea (0.5 mg/kg). Cr(VI) contents in 23 soil samples were compared by the analytical methods of EPA 7196A and 7199. Cr(VI) was detected in 13 of 23 soil samples by EPA 7196A, while EPA 7199 was not detected in any soil samples. The Cr(VI) content in 23 soil samples by EPA 7196A was not clearly correlated with Cr, Fe, Mn and clay content in the soil samples. However, the contents of Cr(VI) and organic matter of the soil samples had the highest coefficient of determination ($R^2$) of 0.80. In order to evaluate the correlation between the recovery rates of Cr(VI) and organic matter contents in the soil samples, the recovery rates of 5 soil samples added Cr(VI) standard solution were analyzed by the analytical methods. According to the results, the higher the organic matter contents in soil samples, the lower the recovery rates of Cr(VI) by US EPA 7196, while in case of US EPA 7199, the recovery rates were stable regardless of the organic matter contents.

• 공업화학
• /
• 제26권4호
• /
• pp.477-482
• /
• 2015

본 연구에서는 순환골재와 순환골재/제강슬래그 조합을 이용하여 수용액상에서 $Cr^{6+}$과 $As^{3+}$ 흡착 특성을 평가하였다. 순환골재와 제강슬래그의 주요 성분(CaO, $SiO_2$, $Al_2O_3$, $Fe_2O_3$)이 각각 91%와 86.9% 함유되어 흡착제로서 유리한 조성을 가지고 있다. 순환골재와 순환골재/제강슬래그 조합에 있어서 $Cr^{6+}$과 $As^{3+}$의 동역학적 평형은 각각 180 min과 360 min 이후에 도달하였다. 동적흡착결과를 유사 1차 모델과 유사 2차 모델로 분석한 결과 두 모델 모두 더딘 평형 결과를 나타냈다. 순환골재와 순환골재/제강슬래그 조합에 있어서, 평형흡착 실험은 Freundlich 모델에 잘 부합했고, $Cr^{6+}$보다 $As^{3+}$의 흡착량이 더 높았다. 용액의 pH가 6에서 10으로 증가함에 따라서 $As^{3+}$의 흡착률은 증가하는 것으로 나타났다. 한편, $Cr^{6+}$는 감소를 나타냈다. 본 연구 결과를 통해 순환골재 및 순환골재/제강슬래그 조합은 중금속($Cr^{6+}$, $As^{3+}$)을 효율적으로 제거할 수 있는 흡착제로 판단된다.

• 한국의류산업학회지
• /
• 제9권1호
• /
• pp.119-123
• /
• 2007

Dyeing properties of soybean fabrics on gromwell colorants were studied for the effect of dyeing conditions, such as colorants concentration, temperature, time and pH on the dye uptake and effect of mordants on color change, dye uptake and various colorfastness. Antimicrobial activity of soybean fabrics dyed and sim-mordanted with gromwell colorants was examined by shake flask method. Gromwell colorants showed considerably affinity to soybean fabric and its isotherm adsorption curve was Freundlich type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of gromwell colorants to soybean fabric. Soybean fabrics showed R color on Al, Cu and Sn mordant, RP color on Cr and Fe mordant, but soybean fabrics showed low dye uptake depending on mordanting treatment. Light colorfastness was increased for Cr and Fe mordants. Staphylococcus aureus reduction rates were above 90% for Cr and Cu mordanted soybean fabrics, and the others were poor. Klebsiella pneumoniae reduction rates soybean fabrics did not show reduction rate hardly.

• 한국토양비료학회지
• /
• 제45권1호
• /
• pp.103-106
• /
• 2012

To investigate distribution characteristics of heavy metals in soils in the vicinity of King Sejong Station of King George Island, Antarctica, Fe, Mn, Cu, Zn, Pb, Co, Cd, Cr, Ni and Mo contents were investigated under different distances and directions from King Sejong Station. 13 sample sites were distributed from King Sejong Station. In site 4, the Cd content was higher than that in other sites. The Cr content was the highest in site 9, and the Ni and Mn contents were high in site 12. Cu, Co and Zn were highly contained in distance 1~2 km from King Sejong Station. Cd, Cr, Ni and Mo contents were lower, whereas Fe, Mn, Cu, Zn, Pb and Co contents were higher than other heavy metal contents at all sites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.294-295
• /
• 1997

CO-Cr 수직자기기록 매체의 우수한 하지층을 개발하기 위하여, 스피넬 결점막$(Fe,M)_3O_4$ (M=Ni,Zn)이 스핀스프레이 페라이트 플레이팅 방법으로 유리 기판 위에 제작되었다. 반응액과 산화액은 기판이 회전하는 반응용기로 분사되었다. 반응은 기판의 회전소독, 반응온도, 반응액과 산화액의 유속 그리고 반응액과 산화액의 농도에 의해 영향받았다. 반응액과 산화액의 유속은 60(ml/min)으로 하고, 반응온도는 90[$^{\circ}C$] 그리고 기판의 회전속도는 150[rpm]의 조건하에서, 페라이트 플레이팅 반응에 미치는 반응액과 산화액 농도의 영향이 화학적 조성, 결정학적 및 자기적 특성의 관점에서 연구되었다. $Ni_{0.34}Zn_{0.66}Fe_2O_4$의 조성에서, 우리는 가장 안정한 결정학적 및 자기적 특성을 얻었다.