• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1547-1554
• /
• 2017

VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.656-661
• /
• 2005

To develop food additives from pyroligneous liquor, we first examined the physicochemical characteristics of volatile substances. The pH, gravity, acidity, solution tar, and scorched remains in the pyroligneous liquor were 2.50, 1.020, $0.8\%$ $2.31\%$ and $0.008\%$ respectively. The main compounds of pyroligneous liquor were 2,6-dimethoxyphenol (syringol), 2-hydroxy-2-cyclopenten-l-one, 1,2-benzenediol (catechol), phenol, 2 (5H)-furanone, 2-methoxyphenol (guaiacol), 5-hydroxymethyl-2 furancarboxaldehyde were found in organic phase, whereas catechol, 1,4 : 3,6-dianhydro-${\alpha}d$-glucopyranose, cyclopropyl carbinol, 5-hydroxymethyl-2 furancarboxaldehyde in aqueous phase.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1727-1735
• /
• 2013

This study is carried out to investigate the analysis of nutrition and antioxidants of soybean Chungkukjang powder (SCP), Yak-Kong Chungkukjang powder (YCP) and Yak-Kong Chungkukjang powder added black foods (YCBP) for the management of Alzheimer's disease. The water content of YCBP was higher than that of SCP and YCP. The soluble and crude protein contents of YCP were the highest among three Chungkukjang powders. In SCP, YCP and YCBP, the ratios of unsaturated and saturated fatty acids were 5.17, 5.76, and 5.78, respectively. The mineral content of SCP was higher than that of YCP and YCBP. Antioxidants analysis showed that the content of diadzein was the highest in YCP and genistein, and anthocyanin contents were higher than the others in YCBP. In conclusion, YCP and YCBP had higher contents than SCP in soluble and crude proteins, and unsaturated fatty acids, which are needed for composition and function of the brain tissue. Also, it was found that the contents of diadzein, genistein and anthocyanin with outstanding antioxidative ability were high. Thus, this study suggests that Chungkukjang powder, which is made with Yak-Kong, black sesame, black rice and sea tangle, can be utilized for in vivo experiment for the control of oxidative stress, reported as cause and therapy for Alzheimer's Disease.

• The Korean Journal of Nuclear Medicine
• /
• v.1 no.1
• /
• pp.1-19
• /
• 1967

The effects of X-ray irradiation and the thyroid gland on the erythropoietic system were studied in the white male rabbits. The total body irradiation was done in doses of 250 r and 500 r to each of 5 rabbits for 10days. The factors were 220KV, 10mA, FLI/4 Cu+1 mmAI(HVL:2.0 mm Cu) 50 cm F.S.D. The thyroid dysfunction was experimentally induced, by giving 2mg of thyroid tablets per kg body weight for 15 days in 5 rabbits for hyperthyroidism and by giving 1.5 mC of $^{131}I$ per kg body weight in another 5 rabbits for hypothyroidism. Fourteen healthy rabbits were used as control. The hematologic changes and ferrokinetic data obtained from $^{59}Fe$ and apparent half survival of the red blood cells obtained from $^{51}Cr$ were compared. Following were the results: A. X-ray irradiated group; 1. There were no significant changes in hematologic findings except for leucopenia. A slight decrease of red blood cells was observed in 500 r irradiated animals. 2. The decreases in the iron turnover rates of the plasma and red blood cells as well as in the red cell renewal rate were found in both groups. A :significant decrease of the red cell iron utilization rate was observed in the 500 r irradiated animals. 3. The apparent half survival times of the red blood cells were slightly, in the 250 r ($12.1{\pm}0.80$ days), and markedly shortened in the 500 r irradiated animals ($9.8{\pm}1.38$ days), the normal being $14.0{\pm}1.6$ days. 4. It appears, therefore, that the anemia caused by X-ray irradiation is due to the inhibition of hemopoietic function and the excess destruction of the red blood cells. B. Thyroid dysfunction group; 1. The slight increases of the red blood cell count and circulating blood volume with the normal serum iron level were observed in the hyperthyroid group, while the decreases of the red and white blood cell counts, hemoglobin and hematocrit values with a marked decrease of the serum iron level in the hypothyroid group. 2. A marked decrease of the plasma iron disappearance rate with increases of plasma iron turnover, red cell iron utilization and red cell iron turnover were observed in the hyperthyroid group, while the marked delay and decreases in the hypothyroid group. 3. The apparent half survival times of the red blood cells were almost the same with the control in the hyperthyroid group, ($14.0{\pm}1.58$ while a marked shortening in the hypothyroid group $10.6{\pm}0.30$. 4. It was reconfirmed that the thyroid hormones bear a close relationship with the erythropoietic system, namely, the latter is stimulated by the former. The lack of the thyroid hormones thus induces the bone marrow depression leading to anemia the major cause of which, therefore, is not hemolysis.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.543-553
• /
• 2010

Almost five million citizens a day are using subways as a means of traffic communication in the Seoul metropolitan. As the subway system is typically a closed environment, indoor air pollution problems frequently occurs and passengers complain of mal-health impact. Especially $PM_{10}$ is well known as one of the major pollutants in subway indoor environments. The purpose of this study was to compare the indoor air quality in terms of $PM_{10}$ and to quantitatively compare its source contributions in a Seoul subway platform before and after installing platform screen doors (PSD). $PM_{10}$ samples were collected on the J station platform of Subway Line 7 in Seoul metropolitan area from Jun. 12, 2008 to Jan. 12, 2009. The samples collected on membrane filters using $PM_{10}$ mini-volume portable samplers were then analyzed for trace metals and soluble ions. A total of 18 chemical species (Ba, Mn, Cr, Cd, Si, Fe, Ni, Al, Cu, Pb, Ti, $Na^+$, $NH_4^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, and ${SO_4}^{2-}$) were analyzed by using an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the source of particulate matters. $PM_{10}$ for the station was characterized by three sources such as ferrous related source, soil and road dust related source, and fine secondary aerosol source. After installing PSD, the average $PM_{10}$ concentration was decreased by 20.5% during the study periods. Especially the contribution of the ferrous related source emitted during train service in a tunnel route was decreased from 59.1% to 43.8% since both platform and tunnel areas were completely blocked by screen doors. However, the contribution of the fine secondary aerosol source emitted from various outside combustion activities was increased from 14.8% to 29.9% presumably due to ill-managed ventilation system and confined platform space.

• Journal of Environmental Science International
• /
• v.18 no.6
• /
• pp.645-654
• /
• 2009

Lab-scale Electrodialysis(ED) system with different membranes combined with before or after pyroma process were carried out to remove nitrate from two pickling acid wastewater containing high concentrations of $NO_3\;^-$(${\approx}$150,000 mg/L) and F($({\approx}$ 160,000 mg/L) and some heavy metals(Fe, Ti, and Cr). The ED system before Pyroma process(Sample A) was not successful in $NO_3\;^-$ removal due to cation membrane fouling by the heavy metals, whereas, in the ED system after Pyroma process(Sample B), about 98% of nitrate was removed because of relatively low $NO_3\;^-$ concentration (about 30,000 mg/L) and no heavy metals. Mono-selective membranes(CIMS/ACS) in ED system have no selectivity for nitrate compared to divalent-selective membranes(CMX/AMX). The operation time for nitrate removal time decreased with increasing the applied voltage from 10V to 15V with no difference in the nitrate removal rate between both voltages. Nitrate adsorption of a strong-base anion exchange resin of $Cl\;^-$ type was also conducted. The Freundlich model($R^2$ > 0.996) was fitted better than Langmuir mode($R^2$ > 0.984) to the adsorption data. The maximum adsorption capacity ($Q^0$) was 492 mg/g for Sample A and 111 mg/g for Sample B due to the difference in initial nitrate concentrations between the two wastewater samples. In the regeneration of ion exchange resins, the nitrate removal rate in the pickling acid wastewater decreased as the adsorption step was repeated because certain amount of adsorbed $NO_3\;^-$ remained in the resins in spite of several desorption steps for regeneration. In conclusion, the optimum system configuration to treat pickling acid wastewater from stainless-steel industry is the multi-processes of the Pyroma-Electrodialysis-Ion exchange.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.439-454
• /
• 2008

The purpose of this study was to extensively identify $PM_{10}$ sources and to estimate their contributions to the study area, based on the analysis of the $PM_{10}$ mass concentration and the associated inorganic elements, ions, and total carbon. The contribution of $PM_{10}$ sources was estimated by applying a receptor method because identifying air emission sources were effective way to control the ambient air quality. $PM_{10}$ particles were collected from May to November 2007 in the Yongin-Suwon bordering area. $PM_{10}$ samples were collected on quartz filters by a $PM_{10}$ high-volume air sampler. The inorganic elements (Al, Mn, V, Cr, Fe, Ni, Cu, Zn, Cd, Pb, Si, Ba, Ti and Ag) were analyzed by an ICP-AES after proper pre-treatments of each sample. The ionic components of these $PM_{10}$ samples ($Cl^_$, $NO_3^-$, $SO_4^{2-}$, $Na^+$, $NH_4^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) were analyzed by an IC. The carbon components (OC1, OC2, OC3, OC4, OP, EC1, EC2 and EC3) were also analyzed by DRI/OGC analyzer. Source apportionment of $PM_{10}$ was performed using a positive matrix factorization (PMF) model. After performing PMF modeling, a total of 8 sources were identified and their contribution were estimated. Contributions from each emission source were as follows: 13.8% from oil combustion and industrial related source, 25.4% from soil source, 22.1% from secondary sulfate, 12.3% from secondary nitrate, 17.7% from auto emission including diesel (12.1%) and gasoline (5.6%), 3.1% from waste incineration and 5.6% from Na-rich source. This study provides information on the major sources affecting air quality in the receptor site, and therefore it will help us maintain and manage the ambient air quality in the Yongin-Suwon bordering area by establishing reliable control strategies for the related sources.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.3
• /
• pp.234-243
• /
• 2012

The wintertime high loading for atmospheric pollutants is certainly expected in the Byunsan Peninsula of Korea because of a great-scale reclamation project having construction of 33 km tidal sea dike impounding an area of over 40,000 ha and long-range transport. The goal of this study is to trace the origin of this wintertime burden for ambient particulate matter (hereafter called "PM") in the Byunsan Peninsula of Korea. The size-segregated (i.e., cutoff size from 0.01 ${\mu}m$ to 4.7 ${\mu}m$) PM sampling was conducted at a ground-based site of Byunsan Peninsula located in the west coast of Korean Peninsula during the height of dike constructing. Data archived in this study are the mass concentrations of ionic, elemental, and carbonic components in size-fractioned PM. The elemental mass of individual submicrometer particles was also analyzed. The sum of 5-source (i.e., elemental carbon, organic materials, inorganic secondary pollutants, crustal matter, and sea-salts) concentrations shows the bimodal distribution (major and minor peaks formed around $D_p$, 0.65 ${\mu}m$ and $D_p$, 4.7 ${\mu}m$, respectively) by border with 0.19 ${\mu}m$ of cutoff size. The concentrations of EC in $PM_{1.1-0.01}$ in winter and spring times were 4.62 ${\mu}g\;m^{-3}$ and 3.74 ${\mu}g\;m^{-3}$, respectively. Elemental masses of submicron individual particles are classified into two groups, i.e., the major elements (Cl, Al, Si, S, and P) and the minor trace elements. Cluster analysis differentiated the elements in submicron individual particles into 4-cluster. Among them, three clusters are in agreement with the major (Al, Si, S, and P), minor (Fe, Ca, and K), and trace compositions of coal burning. Meanwhile, Cl classified as an independent cluster has different source profile which was mainly due to the Saemangeum seawall project. Some highly toxic elements (e.g., Cr, Mn, and As (and/or Pb)) were also detected in some part of submicron individual PM. As a consequence, the combination of the Saemangeum project and winter monsoon played a considerable part in the double aggravation of wintertime air pollution in the Byunsan Peninsular.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.74-85
• /
• 2013

Since the underground transportation system is a closed environment, indoor air quality problems may seriously affect many passengers' health. The purpose of this study was to understand $PM_{10}$ characteristics in the underground air environment and further to quantitatively estimate $PM_{10}$ source contributions in a Seoul Metropolitan subway station. The $PM_{10}$ was intensively collected on various filters with $PM_{10}$ aerosol samplers to obtain sufficient samples for its chemical analysis. Sampling was carried out in the M station on the Line-4 from April 21 to 28, July 13 to 21, and October 11 to 19 in the year of 2010 and January 11 to 17 in the year of 2011. The aerosol filter samples were then analyzed for metals, water soluble ions, and carbon components. The 29 chemical species (OC1, OC2, OC3, OC4, CC, PC, EC, Ag, Al, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Si, Ti, V, Zn, $Cl^-$, $NO_3{^-}$, $SO_4{^{2-}}$, $Na^+$, $NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$) were analyzed by using ICP-AES, IC, and TOR after proper pretreatments of each sample filter. Based on the chemical information, positive matrix factorization (PMF) model was applied to identify the $PM_{10}$ sources and then six sources such as biomass burning, outdoor, vehicle, soil and road dust, secondary aerosol, ferrous, and brakewear related source were classified. The contributions rate of their sources in tunnel are 4.0%, 5.8%, 1.6%, 17.9%, 13.8% and 56.9% in order.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.225-232
• /
• 2012

In order to evaluate the relationship of between the contents of inorganic elements in shellfish and surface sediments, we measured the concentration of inorganic elements (As, Ca, Cd, Cr, Fe, Hg, Li, Mn, Ni, P, Pb, Zn) in various shellfish and surface sediments of research area. The enrichment factor (EF) and the index of accumulation rate (Igeo) of the metals showed that the research areas can be classified as moderately polluted, or unpolluted. And also we measured the geochemical characteristics of surface sediments(grain size, chemical oxygen demand (COD), ignition loss (IL) and acid volatile sulfide (AVS). The grain sizes for research areas of surface sediment were similar the ratio of silt and clay in comparison with other sites. The COD and IL in surface sediment ranged from 5.41 to 14.06 mg/g. d.w. (mean $8.78{\pm}3.16$ mg/g d.w.) and from 0.92 to 3.17% (mean $2.08{\pm}0.86%$), respectively. Siginificant differences in metal concentrations also were determinated in the shellfish tissue among the different sites. However, except for metals(Mn, Zn), which showed some elevation of concentrations, the variations in the shellfish tissue were not related to variations in the sediment.