• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.427-435
• /
• 2007

에너지원으로서 수소를 생산하기 위하여 하니컴 구조를 갖는 모노리스에 10 wt% $Ni/CeO_2-ZrO_2$ 촉매를 담지한 후 메탄의 수증기 개질 실험을 수행하였다. 다른 $CeO_2/ZrO_2$ 몰비를 갖는 촉매들 중에서, $Ni/CeO_2-ZrO_2(CeO_2/ZrO_2=4/1)$촉매가 $700-800^{\circ}C$에서 높은 메탄의 전환율을 보여 주었다. 10wt% $Ni/CeO_2-ZrO_2$ 촉매가 담지된 금속 모노리스 촉매체는 높은 열전도도와 비표면적들로 인하여 좋은 촉매 특성을 보여줌을 확인할 수 있었다. 또한, 금속모노리스 촉매체는 반응물에서 과다의 수증기에 의한 수소 수율에서 크게 영향을 받지 않음을 알 수 있었다. $GHSV=30,000h^{-1}$, 반응물 비$(H_2O/CH_4=3.0)$ 반응온도 $800^{\circ}C$에서 금속모노리스 촉매체는 98%이상의 메탄의 전환율을 보여주었다. 생성물 가스에서 $CO_2/CO$의 비는 수증기/메탄의 반응물비가 증가할수록 수성가스화 반응에 의하여 증가됨을 알 수 있었다.

• 한국대기환경학회지
• /
• 제4권1호
• /
• pp.1-12
• /
• 1988

This study was carried out to measure the contents of soluble sulfur and heavy metals in the leaves of roadside tree at 34 sampling sites of Seoul area from the Sep. 1 to Sep. 30 during 1985 and 1986. The results were as follows; 1. Average contents of soluble sulfur at all sampling sites were; Plantanus orientalis 0.474%, Ginkgobioloba 0.562%, and Salix pseudolasiogyne 0.566%. 2. Correlation between sulfur dioxide concentration in the air and soluble sulfur in the leaves by area were; Green belt area R = 0.985, Residential area R = 0.856, Commercial area R = 0.668, Industrial area R = 0.886. Correlation by species were ; Platanus orientalis R = 0.817, Ginkgobiloba R = 0.771, Salix pseudo-lasiogyne R = 0.824. 3. Correlation between $SO_X$ concentration in the air and sulfur contents in the leaves showed positive significance. 4. Contents of soluble sulfur in the heavy traffic area were higher than that of light traffic area. 5. Heavy metal contents of 1986 were higher than that of 1985; Fe> Mn > Zn > Pb > Cu > Cd > Cr. 6. Lead contents in the leaves of 1986 were; Platanus orientalis 16, 701 ppm, Gingobiloba 21,729ppm, Salix Pseudo-lasiogyne 12.418 ppm.

• 한국대기환경학회지
• /
• 제13권5호
• /
• pp.345-353
• /
• 1997

The purpose of the study was to stastically classify individual PM-10 measured by SEM/EDX (scanning electron microscopy/energy dispersive x-ray analyzer). The SEM/EDX provided various physical parameters like optical diameter, as well as major 18 chemical information (Mg, Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Pb) for a particle-by-particle basis. The total of 1,419 particles were analyzed for the study. Thus density and mass of each particle can be estimated based on its chemical composition. Further the study developed 4 semisource profiles including highway, oil boiler, incinerator, and soil emissions, where each sample was collected near the source in the ambient air The profiles developed were consisted of mass fractions and their uncertainties based on a particle class concept. To obtain mass fraction of each particle class, an agglomerative hierarchical cluster analysis was initially applied to create particle classes for each sample. Then uncertainties were calculated for each class based on the jacknife method. The 1,258 particles out of 1,419 (88.7%) were assorted in newly generated particle classes. The study provides opportunities to identify particle's source quantitatively and to develope various receptor models.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.217-225
• /
• 1999

The effect on the pitting corrosion resistance of laser welding and surface treatment developed as a repair method of stream generator tubing material that was a major component of primary system at nuclear power plant was observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface observed. Some heat-treated Alloy 600 tubing materials used at domestic nuclear power plants were laser-surface melted and the microstructural characteristics were examined. The pitting corrosion resistance was examined through Ep(pitting potential) and degree of pit generation by means of the electrochemical tests and the immersion tests respectively. The pit formation characteristics were investigated through microstructural changes and the pit initiation site and pit morphology. The test results showed that the pitting corrosion resistances was increased in the order of the followings; sensitized Alloy 600, solution annealed alloy600, and laser surface melted Alloy 600. Pits were initiated preferably at Ti-containing inclusions and their surroundings in all tested specimens and it is believed that higher pitting resistance of laser-surface treated Alloy 600 was caused by fine, homogeneous distribution of non-soluble inclusions, the disappearance of grain boundary, and the formation of dense, stable oxide film. The major element of corrosion products filled in the pit was Cr. On the other hand, Fe was enriched in the deposit formed on the pit.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.157-159
• /
• 2001

The molten carbonate fuel cell has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti alloys has been done in (62+38)mol% (Li+K)C03 melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method. And, The research and development for the solid oxide fuel cell have been promoted rapidly and extensively in recent years, because of their high efficiency and future potential. Therefore this paper describes the manufacturing method and characteristics of anode electrode for SOFC, by the way, Ni-YSZ materials are used as anode of SOFC widely. So in this experiments, we investigated the optimum content of Ni, by the impedance characteristics, overvoltage. As a result, the performance of Ni-YSZ anode(40vol%) was better excellent than the others.

• 한국표면공학회지
• /
• 제24권1호
• /
• pp.31-41
• /
• 1991

The nodular corrosion behavior of Zircaloy-4 alloy was investigated by autoclave test at 50$0^{\circ}C$ under 1500 psi for the specimens quenched into water from $700^{\circ}C$, 80$0^{\circ}C$, 90$0^{\circ}C$, and 105$0^{\circ}C$. It was observed that the corrosion resistance of Zircalloy-4 specimen increased with increase in annealing temperature, and annealing at $\alpha$-region temperatures resulted in nodular corrosion while annealing at the temperature range of $\alpha$+$\beta$ and $\beta$ did not show nodular corrosion. It was also found that the size of nodule formed on the surface of the specimens increased with increase in exposure time in autoclave, but the total number of nodule remained uncha-nged. The corrosion of furnace-cooled specimens progressed mostly in the interior of grains where Fe and Cr alloying elements were largely depleted during the cooling process. However, the grain boundary seemed to act as a barrier to the nodular corrosion. From combining the present results with other works, it is suggested that the nodules nuc-leate in the local region where some of alloying elements are depleted.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.194-197
• /
• 2006

제주도 대표토양을 대상으로 이들의 모재 및 토양단면의 토양 특성을 조사하고, 제주도 대표토양의 주요 유해 중금속 원소의 총 함량을 분석하여 그 분포특성과 이화학 및 광물학적 특성을 비교 평가하였다. 주성분분석 결과 전형적인 화산회토의 특성을 보이는데 하부 층위에서 Si, Al, Fe 함량의 증가 및 표토에서의 염기용탈을 보여주었다. 현무암질 모재 기원임을 보여주는 ferromagnesian 광물들이 주로 관찰되었으며 심토에서는 상당량의 깁사이트가 관찰되는 것이 특징인데 이는 표토에서 과잉 생성된 알루미늄이 하부토양으로 이동하여 이차적으로 생성집적된 것으로 판단된다. 중금속 총함량 분석결과, Zn, Ni, Co, Cr의 함량이 세계 토양 내 함량범위를 초과하였으며 향후 진행될 연구에서 제주도 화산회 토양의 주 점토구성광물인 알로페인을 비롯한 점토광물 및 비정질 물질에 대한 특성 및 정량적 조사와 중금속원소별 화학적 형태 파악을 위한 연속추출분석 등을 수행하여 중금속원소의 존재상을 규명하고 지표 토양 및 지하수 환경으로의 중금속 이동성을 평가하고자 한다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.298-301
• /
• 2000

Heavy metals are extracted from stream sediments, roadside soils and sediments and soils and tailings from mining area using partial extraction, acid digestion and HF-digestion. Compared to amounts of heavy metals extracted using partial extraction, those extracted using acid digestion are higher by 2.0∼220.9 times in Cu, 2.4∼2806.1 times in Pb, 1.3∼121 times in Cd, 14.1∼1300885 times in Fe, 1.2∼271.5 times in Mn, 1.3∼372.5 times in Zn, 2.2∼1734.5 times in Cr. Although partial extraction, which extracts less amounts of heavy metals from soil compared to acid digestion, is used in domestic standard method for examination of soil, domestic soil standard for heavy metals in non-agricultural and industrial areas is higher than soil standard in foreign countries which use acid digestion, For improvement of the domestic standard method for assessment of soil, it is suggested to lower the domestic soil standard for heavy metals or to change pretreatment method for extracting heavy metals from partial extraction to acid digestion with modifying the soil standard.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.112-119
• /
• 1997

Coastal sediments collected near the Youngkwang Nuclear Power Plant were analysed for major(Al$_2$O$^_3$, Fe$^_2$O$^_3$, MgO, CaO, Na$^_2$O, K$^_2$O, TiO$^_2$, MnO), trace (Ba, Sr, V, Co, Cr, Cu, Ni, Zn, Pb) metal, and P$^_2$O$^_5$ contents. The composition of bulk metals from most stations fits within the range as those in the average crustal and sedimentary rocks, suggesting that the anthropogenic perturbation of these components is insignificant. The abundance and distribution of total contents for the majority of metals in the surface sediment could be explained by the grain size and were associated with mud (<63 ${\mu}$m) contents. However, distributions of Ca, K, Sr and Ba did not have any significant association with the sediment grain size. This may be due to the geochemical coherence among these metals in certain minerals abundant in coarse grained fractions. The distribution of Pb appears to be partly affected by the contribution from aerosol fallout. Using the R'-mode factor analysis, we show that the variance of the metal contents could be explained by four factors which account for 93.7% of the total variance. It appears that texturally controlled and/or sorting factors influenced by fine fraction are the most dominant factors which determine the relative abundance and distribution of metals in the study area.

• 대한예방한의학회지
• /
• 제13권1호
• /
• pp.93-103
• /
• 2009

Evidences from various countries suggest that toxic heavy metals in herbal medicine may constitute a serious health problem. In order to evaluate whether the toxic heavy metals caused by herbal medicine intake, blood samples collected from 222 patients taking herbal medicine were analyzed. In average levels of analyzed metals, $0.4{\sim}33.9%$ of total samples for 8 metals such as Cd, Co, Cu, Hg, Mn, Ni, Pb and Zn except Cr and Fe exceeded the upper limit for WHO reference value. In analysis of regression coefficients indicating the levels of metals increased or decreased after taking herbal medicine for one month, however, there were different aspects by intake types for herbal medicine. For example, the metals increased by taking decoction in blood samples were as follows; Cd and Pb whether Mn, Ni and Pb as increased metals were identified in the group taking pill and decoction(combined intake group). The odds ratio showing values higher than 1 indicating that people who take herbal medicine would have possibility higher for metal accumulation in blood than that from people who do not take herbal medicine. The metals showing the odds ratio higher than 1 were Hg and Ni in decoction group, and Cd and Hg in combined intake group. However, eight of the total, 10 metals showed the odds ratios lower than 1 by taking herbal medicine. Thus, this may explain the possible role of herbal medicine as a chelator for heavy metals in body.