• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.2
• /
• pp.89-102
• /
• 2000

A total of 318 particulate sample sets consisting of both fine PM(FPM : dp$\leq$2.5 ${\mu}{\textrm}{m}$) and coarse PM(CPM : 2.5${\mu}{\textrm}{m}$${\mu}{\textrm}{m}$) was collected by a dichotomous sampler in Suwon area from December 1996 to November 1997. The concentration of seven inorganic elements such as pb. Cr, Cd, Cu, Zn Fe and Na were determined from each sample using an AAS. The purpose of the study was to extensively investigate environmental behaviors of particulate matters and to provide air quality management schemes applying various statistical approaches. The mean concentrations of PM10 Results of correlation analyses indicated the existence of strong correlations among inorganic elements PM10 FPM CPM and various meterological variables. Our study also examined the degree of uncertainties whether the particular elements can be assorted into the accumulation mode or the coarse mode in their size distribution. Furthermore the analysis of the pollution rose showed graphically the direction of potential sources of particulate matters. According to statistical analyses of our data quantitative differences appeared in the pollution patterns between weekdays and weekends.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.4
• /
• pp.23-40
• /
• 1990

This study has been carried out to investigate into some effects of Mn content with varying amounts and austenite grain size on hardenability in boron-added Fe-C-Cr-Mo alloy systems. (1) Austenite grains have been found to hardly grow in the temperature range of $900^{\circ}C$ to $950^{\circ}C$, whereas they grow rapidly in the temperature range of $975^{\circ}C$ to $1100^{\circ}C$. (2) Austenite grain growth is considerably small with increasing holding time at a given austenitizing temperature and is, in particular, hardly found to occur at a temperature of $900^{\circ}C$. (3) The hardenability improves ramarkably as Mn content is increased at three different austenitizing temperatures $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. (4) The maximum hardenability is obtained from steels A, B and C austenitized at the $900^{\circ}C$, although Mn content is varied in each specimen.

• Journal of the Korean Society for Heat Treatment
• /
• v.27 no.1
• /
• pp.1-9
• /
• 2014

For connector material applications, the influence alloying elements of Mn, Cr, Fe, and Ti and cold rolling reduction on the mechanical property, electrical conductivity and bendiability of Cu-Ni-Si-P alloy was investigated. The hot rolled plates were solution treated at $980^{\circ}C$ for 1.5 h, quenched into water, cold rolled by 10% and 30% reduction in thickness, and then aged at $440{\sim}500^{\circ}C$ for 3, 4, 5 times. respectively. Cu-Ni-Si-P-x alloys cold rolled by 10 reduction before heat treatment have a good bendability compare to cold rolled by 30 reduction. Cu-3.4Ni-0.8Si-0.03P-0.1Ti shows the peak strength value of 759 MPa, an electrical conductivity of 39%IACS, an elongation of 10% and a hardness of 256 Hv aged at $440^{\circ}C$ for 6 hrs. Thus it is suitable for lead frame and connector.

• The Journal of Pediatrics of Korean Medicine
• /
• v.21 no.2
• /
• pp.51-67
• /
• 2007

Objectives The study was designed to find out the relationships between short stature and low weight among children and teenagers. Methods This research was performed in 21 children and teenagers from August 2006 to June 2007. We measured height, weight, body mass index, obesity rare, bone age, and HTMA. Moreover, we analyzed correlation with height, weight, mineral concentrations and ratios obtained from HTMA. Results There were significant correlations between HTMA and short stature and low weight. 1. Most subjects(76%) had slow metabolic types. 2. Ca, Mg, Zn, Ca/P, and Cr had significant differences between high bone age group and high chronological age group. 3. Fe/Cu had significant differences between a group that recent height is more smaller than inherited height and a group that recent height is more taller than inherited height. 4. Ca, Mg, Ca/P had significant differences between a low weight group and a normal weight group classified by obesity rate. Conclusions Children and teenagers with short stature and low weight have specific mineral characters.

• The Korean Journal of Quaternary Research
• /
• v.10 no.1
• /
• pp.27-52
• /
• 1996

금강 퇴적물의 지화학적 특성을 파악하기 위하여 상류에서 하류까지 21개의 표층 퇴적물을 채취하고 총금속(Al, Fe, Mn, Cr, Co, Ni, Cu, Zn, Pb) 입도별 금속 및 존재형태별 금속을 분석하였다. 또한 하천에서 연안역까지 미량금속의 공간적 변화를 보기 위해 부유물 을 일정 간격으로 채취하여 미량금속을 분석하였다. 퇴적물 중 미량 금속 함량을 평균 입도 와 밀접히 관계하여 변화하며 세립질실트 이하 부분에서 가장높은 함량을 보였고 이 높은 함량은 하천 부유물 중 금속 함량과 Mn을 제외하고 거의 유사한 수준이었다. Pb은 조립질 모래에서도 높은 함량을 보이는데 이는 조립질 모래에 많이 포함된 정장석에 의한 영향이 되고 세립질 실트에서의 높은 금속 함량은 세립한 중광물에 의한 영향이다. Mn과 Pb을 제 안한 금속들은 퇴적물 중 주로(70% 이상) 결정 격자와 관계하여 존재하는데 이는 퇴적물의 주구성 입도가 조립하여 금속이 풍부하고 세립한 중광 물에 의한 영향이 크기 때문이다. 하 천에서 염하구로 금속 함량이 급격히 감소하는데 이는 용존 $Mn^{+2}$이온이 $MnO_2$로 변화하는 산화반응과 하천구역에서의 퇴적 그리고 염하구에서 금속이 적어 진 입자(염하구 내에서 유기물 분해/용해로 만들어지거나 재부유 작요에 의한 조립질 물질) 와 하천 부유물과의 혼합작용에 의해 이루어진다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.5
• /
• pp.363-372
• /
• 2002

PM$_{10}$ aerosols were collected using low volume air sampler every month intervals from September 1992 to August 1991 in Seoul. These samples were analyzed for 20 trace elements (Al, As, Ba, Br, Ca, Cl, Co, Cr, Fe, K, Mn, Na, Ni, Pb, Sc, Se, Si, Ti, V and Zn) by INAA (instrumental neutron activation analysis), XRF (x-ray fuorescence spectrometer), and ICP (inductively coupled plasma). PM$_{10}$ mass concentrations higher than 70 $\mu$g/m$^3$ were 32% of 60 samples and had significantly higher concentrations in spring and winter than in summer and fall (p-value<0.001). The elements of As, Br, Cl, Ni, Pb, Se, V, and Zn are enriched by factors of 20 to 2,000 relative to their natural abundance in crustal soil. To further identify common sources of pollution-related trace elements, factor analysis was applied to the trace elements concentration data. Major sources that contribute to the atmospheric loading of these elements were found to include fossil fuel combustion, automobile and waste incineration (33.2%), metal processing industry (18.2%), and soil(29.8%).8%).

• Korean Journal of Oriental Medicine
• /
• v.6 no.1
• /
• pp.117-122
• /
• 2000

The purpose of this study is to compare the contents of heavy metals of boiled ssangwhatang with those of herbal ingredients which are composed of ssangwhatang. Ssangwhatang is used for antifatigue, tonic and so on. With industrial development, our environment has been very polluted. Herbal medicines also are seriously contaminated by heavy metals and pesticides. The herbal medicines of ssangwhatang were bought at 10 defferent markets. The contents of 14 heavy metals(Ag, As, Ba, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, Sn, Zn) were analysed using ICP. It was found out that 7 heavy metals(Pb, As, Ba, Cd, Hg, Sb, Sn) were not detected at all in boiled ssangwhatangs. But they were detectable in all ssangwhatangingredients before boiling. For example, the content of Pb in one pack of ssangwhatang before boiling was $0.039^{\circ}{\pm}0.005mg$ and Pb in boiled one was not detected. Herbal medicine itself is seriously contaminated by heavy metals. These results suggest that boiled ssangwhatang which we take is safe from the contamination of heavy metals.

• Proceedings of the KWS Conference
• /
• 2002.10a
• /
• pp.38-42
• /
• 2002

HAZ(Heat Affected Zone of weldm ents) properties were investigated for a high nitrogen austenitic stainless steel with a chemical composition of Fe-0.02C-0.15Si-6.00Mn-10.0Ni-23.0Cr-2.00Mo-0.48N-0.14V. Thermal cycle of HAZ was simulated by the thermal cycle simulator (Gleeble 1500). The heat treatment was applied to the Charpy test size sample without notch under various peak temperatures and/or the holding times condition. V-notch Charpy test was performed at the temperature range of 273~77 K. Metallographic examination also was carried out by using optical microscopy, scanning electron microscopy and transmission electron microscopy. The simulated specimens revealed a slight embrittlement compared with the base materials. The impact toughness of the specimens deteriorated with the decreasing test temperature. The results from Charpy V-notch test, however, showed that significant degradation of absorbed energy caused by brittle fracture was not observed for the specimen tested in the test temperature range.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.77-82
• /
• 2016

In this study, Microstructure and hardness of 1st layer with crystallographic orientation were investigated about solidification structure in multipass weld using high Mn-Ni flux cored wire. Microstructure of solidification consisted of austenite matrix and a little ${\varepsilon}-phase$ in grain boundaries. Orientation of grains was usually (001), (101), (111). According to crystallographic orientation, morphology of primary dendrite was different. The depletion of Fe and the segregation of Mn, C, Ni, Si, Cu, Cr, O were found along the grain boundaries. The area of segregation was wide with an order of (001), (101), (111) grains. And hardness of grains with crystallographic orientation increased with an order of (001), (101), (111) grains because of the segregation along dendrite boundary.

• Membrane Journal
• /
• v.5 no.3
• /
• pp.109-118
• /
• 1995

In this study, cell resistivity and membrane resistivity were measured in Fe-Cr redox-fiow battery system using commercial ion-exchange membranes. Cell resistivity and membrane resistivity at charging periods are higher than at discharging periods. And at the same membrane the resistivity were increased with increasing SOC. The resistivity of hydrocarbon type Seiemion CMV membrane was smaller than perfluoro type Nafion 117 and Nafion 551. The cell resistivity and membrne resistivity of CMV membrane at 0 % SOC was $12.864\Omega \textrm{cm}^2$ and $8.751\Omega \textrm{cm}^2$, respectively.