• Journal of the Korean Home Economics Association
• /
• v.42 no.12 s.202
• /
• pp.69-76
• /
• 2004

The purpose of this study was to investigate the colorfastness of cotton and silk fabric dyed with extract of Lotus leaf princeps. The experimental items were classified into mordanting treatments, fabric components and kind of mordants. The experimental test was done by laundering, abrasion(dry/wet), perspiration(acid/alkali) , light fastness, color difference by C.C.M(computer color matching) system and K/S test. The summarized findings resulting from the experiment and investigation are as follows: In the C.C.M and K/S test on mordanting method and kind of fabrics, co-mordanting treatment method and protein fabric (silk) were the most effective. Especially, Fe mordanting treatment was higher than Al, Cu, Cr and none-mordanting. In colorfastness on the mordants, perspiration and laundering fastness showed high grade (4-5) but grades of perspiration(2-3/4) and light fastness(1-3) were low.

• Fashion & Textile Research Journal
• /
• v.4 no.4
• /
• pp.394-398
• /
• 2002

The purse of this study was to invesigate the dyeing fastness on extract of bufferbur leaf princeps. The experimental items were divided into the mordant treatment, component of fabric and kind of mordants. The experimental study was done by laundering, abrasion (dry/wet), perspiration (acid/alkali), light, iron fastness test and color difference by C.C.M system. The summerized finding resulted from experiments and investigation are suggested as follows : In the C.C.M test on mordanting method and kind of fabric, color difference of silk was three times higher than cotton. The silk fabric was the highest in simultaneous mordant treatment but cotton fabric was the highest in none mordant. In color difference analysis on 6 mordants, that of silk and cotton was significantly improved when mordants was treatmented. Especially color difference of Fe and Cu mordanting treatment was higher than Cr, Sn, Al and none. In dyeing fastness on mordants laundering, perspiration, abrasion and iron fastness showed 4-5 grade but light-fastness showed 1-3 grade.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.332-336
• /
• 2001

In this study, the reaction at UBM(Under Bump Metallurgy) and solder interface was investigated. The UBM employed in conventional optical packages, Au/Pt/Ti layer, were found to dissolve into molten Au-Sn eutectic solder during reflow soldering. Therefore, the reaction with different diffusion barrier layer such as Fe, Co, Ni were investigated to replace the conventional Pt layer. The reaction behavior was investigated by reflowing the solder on the pad of the metals defined by Cr layer for 1, 2, 3, 4, and 5 minutes at $330^{\circ}C$. Among the metals, Co was found to be most suitable for the diffusion barrier layer as the wettability with the solder was reasonable and the reaction rate of intermetallic formation at the interface is relatively slow.

• Journal of Powder Materials
• /
• v.7 no.2
• /
• pp.78-84
• /
• 2000

P/M high speed steels(1.28% C, 4.20% Cr, 6.40% W, 5.00% Mo, 3.10% V, bal. Fe) from two different venders were applied to powder compacting punch. The test results show that failure lifes were very different between two punches. These were no difference in volume fraction and mean size of carbides(MC or M6C) but non-metallic inclusions in two punches. Small amount of non-metallic inclusion in the punch did not greatly affect impact energy and transverse rupture strength (TRS). But, fatigue life was drastically decreased by non-metallic inclusions. These results show that fatigue failure was initated around non-metallic inclusion by cyclic load and the fatigue life was greatly affected by the presence of non-metallic inclusions in the punch.

• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.367-371
• /
• 2007

P/M high speed steel (1.26% C, 4.42% Cr, 6.54% W, 4.92% Mo, 3.21 % V, 8.77% Co, bal. Fe) was applied to hot former die. It showed that the die life became 2.7 times higher than that of cast/wrought SKH 55 tool steel which is commercially used. The increase of die life was corresponding to the improved hardness and transverse rupture strength of PM high speed steel due to the finer grain and carbide as well as the uniform carbide distribution. The P/M high speed steel with the promoted die life could be an alternative to the conventional SKH55.

• Textile Coloration and Finishing
• /
• v.12 no.3
• /
• pp.199-206
• /
• 2000

Silk fabric was dyed using methanol extract of Chrysanthemum boreale at $60^\circ{C}$ for 40min. The K/S value of the silk fabric was highest in the premordanting method, while the amount of absorbed mordant was largest in the Cu-mordanting. The surface colors of the dyed fabric highly depended upon mordants or mordanting methods. For all cases, the value of the dyed fabric was dark. The chroma was high by using the Cr-mordant and the color difference was distinct by using the Fe-mordant. Cu-mordanted silk showed highest fastness to light. Dyed silk fabrics by mordanting method showed good antimicrobial activity ad deodorization property.

• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.4
• /
• pp.166-171
• /
• 2002

The effects of Ni and N addition to 304 stainless steel on mechanical properties and microstructure were investigated within temperature ranged from $-196^{\circ}C$ to $25^{\circ}C$. The addition of nickel and nitrogen induced the stability against the formation of provide significantly enhanced ductility at $-196^{\circ}C$ and reduce the Md temperature. Fe-18Cr-10Ni-0.2N alloy showed the ${\gamma}$ phase in deformed structure which it was beneficial to enhance the tensile strength and elongation at $25^{\circ}C$ and $-196^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.429-437
• /
• 1996

This paper surveys extraction condition-temperature, pH, and changes of adsorbance in accordance with extraction condition of curcuma Longa L. solution. Using extracted curcuma Longa L. Solution, dyeing behaviors with natural fiber, effect of mordants to color fastness and color change were investigated. It was found that the amount of absorption (K/S value) was increased by mordants (Fe, Cr) and mordants treatment affected color change of dyed fabric. Among the mordants, effect of citric acid to color change of dyed fabric was the smallest, and color difference of post- mordant treatment is smaller than that of pee-mordant treatment in making use of citric acid as mordant. And K/S value of post mordant was higher than that of pre mordant. It was found that the pre - and post- mordants treatment little affected color fastness, but affected the amound of adsorption and color change of dyed fabric.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.333-334
• /
• 2001

미량금속은 구리 (Cu), 아연 (Zn), 철 (Fe), 망간 (Mn) 등 정상적인 생화학적 반응과정에 필수적인 것과 카드뮴 (Cd), 수은 (Hg), 크롬(Cr), 납(Pb) 등 어떤 확실한 생화학적 기능을 가지지 않는 종류로 나누어지는데, 특히 후자의 경우는 수서환경에서 중요한 오염원으로 작용하고 있다 (Viarengo, 1985). 수은은 우리 생활과 매우 밀접하여 건전지, 온도계, 압력계, 의약품 등의 재료로 사용상 주의가 필요한 중금속이다. 수은은 알킬 형태로 체내에 축적되며, 아주 강한 독성을 나타낸다. (중략)

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1387-1388
• /
• 1997

The MCFC has conspicuous feature and high potential in being used as an energy converter of various fuel to electricity and heat. However, the MCFC which use strongly corrosive molten carbonate at $650^{\circ}C$ have many problem. Systematic investigation on corrosion behavior of Fe/20Cr/Ti alloys has been done in (62+38)mol% (Li+K)CO3 melt at 923K by using steady state polarization and electrochemical impedance spectroscopy method.