• Journal of Environmental Science International
• /
• v.6 no.1
• /
• pp.75-88
• /
• 1997

The rates of photodegradation, reactivities, and mechanisms of photooxidation for the aqueous solution containing with halogen derivatives of aliphatic hydrocarbons have been discussed with respect to the kinds of photocatalysts, concentration of photocatalytlc suspensions, strength of radiant power, time of illumination, changes of pH of substrate solution, wavelength of radiation, and pressure of oxygen gas saturated In the solution. These aqueous solutions suspended with 0.5 $gL^{-1}$ $TiO_2$ powder have been photodecomposed in the range of 100 and 93.8% per 1 hour if it is illuminated with wavelength (λ $\geq$ 300nm) produced from Xe-lamp(450W). The photocatalytic abilities have been increased In the order of $Fe_2O_3$ < CdS < $CeO_2$ < Y_2O_3$ <$TiO_2$, and rates of photodegradation for the solution have maldmum values in the condition of pH 6 ~ 8 and 3 psi-$O_2$ gL^{-1}$. These rates for the Photoolddation Per 1 hour were dependent on the size of molecular weight and chemical bonding for organic halogen compounds and the rates of photodegadation were increased in the order of $C_2H_5Br$ < CH_2Br_2$ < C_5H_11Cl C_2H_4Cl_2$ < tracts-$C_2H_2Cl_2$ < cis-C_2H_2Cl_2$ The T_{1/2}$ and t99% for these solutions were 5~21 and 40~90 minutes. respectively, and these values were coincided with Initial reaction kinetics(ro). It was found that reaction of photodegradation has the pseudo first-order kinetics controlled by the amount of $h^+_{VB}$ diffused from a surface of photocatalysts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.429-429
• /
• 2008

Li$[Ni_{1/2}Co_{1/2}]O_2$ powder were synthesized from co-precipitation spherical metal oxide, $[Ni_{1/2}Co_{1/2}](OH)_2$. The preparation of metal hydroxide was significantly dependent on synthetic conditions, such as pH, amount of chelating agent, stirring speed, etc. The optimized condition resulted in $[Ni_{1/2}Co_{1/2}](OH)_2$, of which the particle size distribution was uniform and the particle shape was spherical, as observed by scanning electron microscopy. Calcination of the uniform metal hydroxide with LiOH at higher temperature led to a well-ordered layer-structured Li$[Ni_{1/2}Co_{1/2}]O_2$, as confirmed by X-ray diffraction pattern. Also these materials have ${\alpha}-NaFeO_2$ ($R\bar{3}m$) structure. Due to the homogeneity of the metal hydroxide, $[Ni_{1/2}Co_{1/2}](OH)_2$, the final product, Li$[Ni_{1/2}Co_{1/2}]O_2$, was also significantly uniform, i.e., the average particle size was of about 10 to 15 ${\mu}m$ in diameter and the distribution was relatively narrow. As a result, the corresponding tap-density was also high approximately 2.41 $gcm^{-3}$, of which the value is comparable to that of commercialized $LiCoO_2$.

• Korean journal of food and cookery science
• /
• v.21 no.5
• /
• pp.629-636
• /
• 2005

This study was carried out to investigate of the quality characteristics of the starch Oddi Dasik(MSOD) manufactured with various addition levels (0, 5, 10, 18 and 28%) of mulberry fruit (Oddi) juice (MFJ), with various levels(55%, 50%, 45%, 37% and 27%) of sucrose syrup, and with the ratio of rice powder: mungbean starch (1:4) according to the traditional Korean Dasik (a kinds of cookie) methodology. The nutritional components of Oddi and MSOD were examined, and sensory evaluation and physical tests of MSOD added MFJ were conducted. The results are summarized as follows. In Oddi, the contents of moisture, crude fat, crude protein, crude ash, and vitamin C, and the levels of acidity, pH and sugar were 88.45%, 0.245%, 2.23%, 0.88%, 53.20 mg%, 8.00%, 4.41 and 11.0 Brix%, respectively. In MSOD (Oddi 10%), the contents of moisture, crude fat, crude protein, and crude ash, were 22.8%, 0.117%, 9.2% and 0.8%, respectively, and were all increased with increasing MFJ amount. In MSOD (Oddi 10%), the contents of Ca, Mg, K and Fe were 63.2 mg%, 70.9 mg%, 376.0 mg% and 7.7 mg%, respectively. and were increased with increasing MFJ amount. For the establishment of the additional amount of MFJ, sensory evaluation and physical tests were conducted. From the total characteristics of sensory evaluation, the MSOD with 10% MFJ was judged as the best. Color L and b values of MSOD significantly decreased and a value increased with increasing MFJ percentage. Hardness, gumminess, adhesiveness and chewiness among the texture characteristics of MSOD were significantly increased with increasing MFJ amount. However, there were no significant differences in springiness and cohesiveness of the MSOD. In conclusion, the optimal added amount of MFJ for the manufacture of the MSOD was proposed to be 10% of the total weight.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.35-41
• /
• 2008

Onions are commonly available and easily processed, and since their skins are thrown away they could be very useful materials from the viewpoint of environmental preservation. This study aimed to process onion skins into the state of powder and look into the optimum condition for hair dyeing by decoloring virgin hair four times and observing the hair dyeing quality and its mechanical and morphologic changes by the different condition of onion skins in duration, temperature, density, pH, and mordant treatment. The observations of hair surface through scanning microscopy showed the formation of cuticle layer, though in a little blown-up state in the case of the hair dyed with onion skin application, when compared with bleaching hair with the completely dissolved cuticle layer. According to the above findings of experiments, the dyeing quality of the hair dyes with onion skin application was excellent, the dyeing was also feasible without mordants, and the use of Fe as the mordant increased dyeing exhaustion more, which would make it an effective hair dye. These results of the experiments indicate that the natural pigment extracted from onion skins can be actually used for hair dyeing from the viewpoints of the dyeing quality and the skin treatment.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.184-189
• /
• 2014

Electric arc furnace dust (EAFD) is a solid waste generated by the steel-scrap recycling process. It mainly consists of zinc oxides (ZnO), alumina ($Al_2O_3$), iron oxides ($Fe_2O_3$), and silica ($SiO_2$). Here we report the preparation and characterization of blue ceramic pigments using EAFD powder as a starting material. $(Zn(EAFD),Co)Al_2O_4$ blue ceramic pigment was prepared by the solid-state reaction method. The color characteristics of the pigment obtained were compared with those of pure $CoAl_2O_4$. The new pigment was characterized using XRD, CIE-$L^*a^*b^*$ color-measurements, SEM, and EDX. The XRD analysis revealed that the $(Zn(EAFD),Co)Al_2O_4$ pigment was composed of mainly the spinel phase of $(Zn,Co)Al_2O_4$. The $Zn(EAFD)_{0.25}Co_{0.75}Al_2O_4$ pigments showed a vivid blue color with a $b^*$ value of -28.64 and a good glaze stability with a transparent glaze.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.4
• /
• pp.312-316
• /
• 2015

PURPOSE. This study aimed to present the clinical applicability of restorations fabricated by a new method, by comparing the bond strength of between ceramic powder with different coefficient of thermal expansion and alloys fabricated by Selective laser sintering (SLS). MATERIALS AND METHODS. Fifty Co-Cr alloy specimens ($25.0{\times}3.0{\times}0.5mm$) were prepared by SLS and fired with the ceramic ($8.0{\times}3.0{\times}0.5mm$) (ISO 9693:1999). For comparison, ceramics with different coefficient of thermal expansion were used. The bond strength was measured by three-point bending testing and surfaces were observed with FE-SEM. Results were analyzed with a one-way ANOVA (${\alpha}$=.05). RESULTS. The mean values of Duceram Kiss ($61.18{\pm}6.86MPa$), Vita VM13 ($60.30{\pm}7.14MPa$), Ceramco 3 ($58.87{\pm}5.33MPa$), Noritake EX-3 ($55.86{\pm}7.53MPa$), and Vintage MP ($55.15{\pm}7.53MPa$) were found. No significant difference was observed between the bond strengths of the various metal-ceramics. The surfaces of the specimens possessed minute gaps between the additive manufactured layers. CONCLUSION. All the five powders have bond strengths higher than the required 25 MPa minimum (ISO 9693); therefore, various powders can be applied to metal structures fabricated by SLS.

• Korean Journal of Materials Research
• /
• v.25 no.2
• /
• pp.95-99
• /
• 2015

$NiAl_2O_4$ nanoparticle was synthesized by a reverse micelle processing for inorganic pigment. $Ni(NO_3)_2{\cdot}6H_2O$ and $Al(NO_3)_3{\cdot}9H_2O$ were used for the precursor in order to synthesize $NiAl_2O_4$ nanoparticles. The aqueous solution, which consisted of a mixing molar ratio of Ni/Al, was 1:2 and heat treated at $800{\sim}1100^{\circ}C$ for 2h. The average size and distribution of synthesized $NiAl_2O_4$ powders are in the range of 10-20 nm and narrow, respectively. The average size of the synthesized $NiAl_2O_4$ powders increased with an increasing water-to-surfactant molar ratio and heating temperature. The crystallinity of synthesized $NiAl_2O_4$ powder increased with an increasing heating temperature. The synthesized $NiAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), a field emission scanning electron microscopy(FE-SEM), and a color spectrophotometer. The properties of synthesized powders were affected as a function such as a molar ratio and heating temperature. Results indicate that synthesis using a reverse miclle processing is a favorable process to obtain $NiAl_2O_4$ spinels at low temperatures. The procedure performed suggests that this new synthesis route for producing these oxides has the advantage of being fast and simple. Colorimetric coordinates indicate that the pigments obtained exhibit blue colors.

• The Korean Journal of Mycology
• /
• v.14 no.3
• /
• pp.225-229
• /
• 1986

Cellulosic substance which plays an important role in carbon cycle is most abundant in the nature world. Some higher fungi are able to digest cellulose directly to satisfy their carbohydrate requirement. Then, in order to investigate the enzymatic components of Lenzites betulina (Fr.) being wood rot, that fungus was collected in Kwangneung area. The carpophore of the fungus was smashed with cool distilled water, extracted and salted out by ammonium sulfate. And then the precipitate was purified by dialysing with visking tube and dissolved with pH 7.8 ammonia water, and the extract was filtrated. The fraction of filtrate was obtained as light brown powder after lyophilization, and determined cellulolytic activity. Cellulolytic potency of Lenzites betulina (Fr.) was 1. 65 unit/ml. The cellulase of Lenzites betulina (Fr.) was stable at below $45^{\circ}C$ and range of pH $4.5{\sim}6.0$ and is completely inactivated at $60^{\circ}C$ for 15 minutes. The optimum condition for the enzymatic reaction was $40^{\circ}C$ and pH 4.0. The enzyme activity was not influenced by the presence of $Ca^{2+}$ and $Fe^{2+}$.

• Korean Journal of Materials Research
• /
• v.12 no.12
• /
• pp.930-934
• /
• 2002

Nanosized $WO_3$ powders were synthesized by the sol-precipitation process using $WCl_{6}$ as the starting material, ethanol as a solvent and $NH_4$OH solution as a precipitant, followed by a washing-drying treatment and calcination. The effects on the powder crystallinity and microstructure of calcination temperature were investigated with XRD and FE-SEM. The $WO_3$ powders calcined at $500^{\circ}C$ and $700^{\circ}C$ showed good crystallinity and their mean particle size was 30nm and 70nm, respectively. These powders were used for the preparation of pastes which were printed as thick films on alumina substrates with comb-type Pt electrodes. The particle size strongly influenced the $NO_2$ gas sensing property of the thick films. A significant reduction in the $NO_2$ sensitivity was observed for the film prepared from larger particle size, having thus a larger grain size. For the film having a smaller grain size, on the other hand, the higher $NO_2$ sensitivity was observed and the sensitivity increased with $NO_2$ concentration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.197-198
• /
• 2006

In the solid freeform fabrication (SFF) system using selective laser sintering (SLS), polyamide-12 powder is currently recognized as general material. In this study, some kinds of polyamide-6 powders with different shape and particlesize were fabricated to investigate the formability, the microstructure and mechanical properties. Also, to develop a more elaborate and rapid system, this study employs a new SLS device with a 3-axis dynamic focusing scanner system instead of the existing fe lens used in commercial SLS. Polyamide-6 powders having the average size of 100 m were treated thermally in order to keep the spherical symmetry in shape. These polyamide-6 powders were mixed with polyamide-12 powders having the average size of 50 m to give the bimodal distribution of size. These mixed powders showed the better fabrication in the selective laser sintering process because the smaller particles of polyamide-11 played an important role in the compact packing of powders by filling the void space between the large particles of polyamide-6. Also, Experiments have performed to evaluate the effect of a scanning path and sintering parameters by fabricating the various 3D objects.