• 제목/요약/키워드: Fe ion

검색결과 1,131건 처리시간 0.028초

Photoluminescence properties of Mn4+-activated Li2ZnSn2O6 red phosphors

  • Choi, Byoung Su;Lee, Dong Hwa;Ryu, Jeong Ho;Cho, Hyun
    • Journal of Ceramic Processing Research
    • /
    • 제20권1호
    • /
    • pp.80-83
    • /
    • 2019
  • The Mn4+-activated Li2ZnSn2O6 (LZSO:Mn4+) red phosphors were synthesized by the solid-state reaction at temperatures of 1100-1400 ℃ in air. The synthesized LZSO:Mn4+ phosphors were confirmed to have a single hexagonal LZSO phase without the presence of any secondary phase formed by the Mn4+ addition. With near UV and blue excitation, the LZSO:Mn4+ phosphors exhibited a double band deep-red emission peaked at ~658 nm and ~673 nm due to the 2E → 4A2 transition of Mn4+ ion. PL emission intensity showed a strong dependence on the Mn4+ doping concentration and the 0.3 mol% Mn4+-doped LZSO phosphor produced the strongest PL emission intensity. Photoluminescence emission intensity was also found to be dependent on the calcination temperature and the optimal calcination temperature for the LZSO:Mn4+ phosphors was determined to be 1200 ℃. Dynamic light scattering (DLS) and field-effect scanning electron microscopy (FE-SEM) analysis revealed that the 0.3 mol% Mn4+-doped LZSO phosphor particles have an irregularly round shape and an average particle size of ~1.46 ㎛.

Effect of irradiation temperature on the nanoindentation behavior of P92 steel with thermomechanical treatment

  • Huang, Xi;Shen, Yinzhong;Li, Qingshan;Li, Xiaoyan;Zhan, Zixiong;Li, Guang;Li, Zhenhe
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2408-2417
    • /
    • 2022
  • The nanoindentation behavior of P92 steel with thermomechanical treatment under 3.5 MeV Fe13+ ion irradiation at room temperature, 400 and 700 ℃ was investigated. Pop-in behavior is observed for all the samples with and without irradiation at room temperature, while the temperature dependence of pop-in behavior is only observed in irradiated samples. The average load and penetration depth at the onset of pop-in increase as the irradiation temperature increases, in line with the results of the maximum shear stress. Irradiation induced hardening is exhibited for all irradiated samples, but there is a significant reduction in the hardness of sample irradiated at 700 ℃ in comparison to the samples irradiated at room temperature and 400 ℃. The ratio of hardness to elastic modulus for all samples decreases with increasing penetration depth except for samples at 700 ℃. With the increasing of irradiation temperature, the ratio of the irreversible work to the total work gradually decreases. In contrast, it increases for samples without irradiation.

Modified Photo-Fenton Reaction을 이용한 Methyl Tert-butyl Ether (MTBE)의 분해 Kinetic 및 메커니즘 규명에 관한 연구 (Degradation Kinetic and Mechanism of Methyl Tert-butyl Ether (MTBE) by the Modified Photo-Fenton Reaction)

  • 김민경;공성호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제11권6호
    • /
    • pp.69-75
    • /
    • 2006
  • 지하 저장 탱크로부터의 유류 유출로 인하여 전세계적으로 넓은 지역의 토양 및 지하수가 오염되고 있다. Methyl tert-butyl ether(MTBE)는 대기 오염 감소를 위하여 널리 사용되고 있는 유류 첨가제이지만 토양 및 지하수로 유입되어 섭취 되었을 때 발암 가능성이 있는 유독 물질이다. 본 연구는 고도 산화 처리 기법 중 유기 오염물의 분해에 높은 효율을 나타내는 고전적 Fenton reaction의 최대 단점인 강한 산성(pH 2.5-3) 의존성을 극복한 새로운 산화 처리 기법을 개발하여 고농도의 MTBE를 효과적으로 분해 하는 것을 그 목적으로 하여 자연 친화적인 chelating agents를 사용하여 중성 영역에서 Fenton reaction을 가능하게 하는 기법인 Modified Fenton reaction과 Ultra Violet light(UV)를 이용하여 분해효율을 극대화 하는 Photo-assisted Fenton reaction을 응용한 Modified Photo-Fenton reaction system을 개발하여 최적 반응 조건 및 반응 차수, 반응 메커니즘을 밝혀내었다. 낮은 독성과 높은 생분해성을 나타낸 Citrate ion을 chelating agents로 선정하였으며 최적 반응 조건은 [$Fe^{3+}$] : [Citrate] = 1 mM : 4 mM, 3% $H_2O_2$, 17.4 kWh/L UV dose, 초기 pH 6.0이며 이 조건에서 1000 ppm MTBE를 분해한 결과 6시간 후 86.75%, 16시간 후 99.99%의 높은 분해율을 나타냈으며 최종 pH는 6.02로 안정적이었다. 또한 Modified Photo-Fenton reaction을 이용한 MTBE 분해 반응은 유사 1차 반응을 나타내었으며 methoxy group이 ${\cdot}OH$ radical과 주로 반응하여 tert-butyl formate(TBF)가 주요 분해 산물이 되는 분해 경로를 따른 다는 것이 밝혀졌다. 본 연구로 개발된 Modified Photo-Fenton reaction에서 발생되는 산화제인 ${\cdot}OH$ radical의 비선택적 반응성을 고려할 때 본 system은 다른 종류의 유기 오염물 분해에도 효과적일 것으로 판단된다.

용액인상법에 의한 $Cr:Al_2O_3$$Ti:Al_2O_3$ 단결정 육성 (Crystal Growth of $Cr:Al_2O_3$ and $Ti:Al_2O_3$ by Czochralski Technique)

  • 유영문;이영국;박로학
    • 한국결정학회지
    • /
    • 제6권1호
    • /
    • pp.1-13
    • /
    • 1995
  • 융액인상법에 의해 Cr:A12O3 및 Ti:A12O3 단결정을 육성한 후 인상속도, 회전속도, 주입이온 및 결정육성 분위기와 같은 결정육성요소가 결정의 품질에 미치는 영향을 조사하고, 육성된 결정의 레이저 효율과 분광학적 물성을 측정하였다. 직경 20mm, 길이 100-135mm 크기의 결정을 <001>방위로 육성하였다. Cr:A12O3의 주입농도 0.5w/o, 인상속도 2.0mm/hr, 회전속도 30rpm으로 할 때 질소기체에 의한 비활성 분위기하에서 양질의 Cr:A12O3 결정이 얻어졌다. Ti:A12O3 단결정은 TiO2를 0.25w/o 주입하고 인상속도 1.5mm/hr, 회전속도 30rpm으로 육성할 때, 수소기체에 의한 환원성 분위기하에서 양질의 결정이 얻어졌다. 원자가가 변화하지 않는 Cr3+이온은 원자가가 변화하는 Ti4+이온을 주입할 때보다 효과적으로 탈포되었으며, Fe3+이온은 Ti3+이온에 대해 탈포를 촉진하는 효과가 있었다. Ti:A12O3 단결정 육성시 90% N2 - 10% H2 혼합기체를 사용하여 환원성 분위기를 조성하는 것이 원자가 변화 및 탈포에 좋은 효과를 나타내었다. 흡수 및 형광방출 스펙트럼 조사 결과 Cr:A12O3 단결정에서 4A2 → 4F2 및 4F1 천이에 의한 흡수와 E→4A2(R1) 및 2A→4A2(R2) 천이에 의한 형광방출 천이를 확인하였다. R1 및 R2 천이의 레이저 주파장은 각각 696±5nm 및 692 ±5nm이고, 각 천이의 형광선폭은 12A, 형광수명은 152 μsec로 측정되었다. Ti:A12O3 단결정에서는 4T2→ 4E의 흡수천이와 4E→4T2의 천이에 의해 650nm-1050nm 범위에서 파장가변이 가능한 형광방출천이가 일어남을 확인하였으며 형광수명은 147μsec, figure of merit는 125.4로 측정되었다. Ti:A12O3 단결정으로부터 제조한 레이저봉을 이용하여 레이저 공진한 결과 레이저 발진효율은 9%로 측정되었다.

  • PDF

${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) 페롭스카이트 세라믹 분리막의 제조 및 산소투과특성 (Fabrication and Oxygen Permeation Properties of ${La_{1-x}Sr_{x}B_{1-{\gamma}}Fe_{\gamma}O_{3-{\delta}}$(B=Co, Ga) Perovskite-Type Ceramic Membranes)

  • 임경태;조통래;이기성;한인섭;서두원
    • 멤브레인
    • /
    • 제11권4호
    • /
    • pp.143-151
    • /
    • 2001
  • 고상 반응법을 이용하여 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분말을 합성하고 혼합전도체 분리막을 소결하여 제조하였다. 제조된 분리막들은 정확한 페롭스카이트 결정구조를 나타내었으며, 95% 이상의 높은 상대밀도를 나타내었다. 산소이온 변환 능력을 향상시키기 위해 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ disk의 양 표면에 L $a_{0.6}$S $r_{0.4}$Co $O_{3-}$$\delta$/ paste를 스크린 프린팅 방법으로 코팅하였으며 코팅 막은 비교적 치밀한 미세구조를 나타내었다. 코팅되지 않은 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 및 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막과 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 산소투과 성능을 비교 실험한 결과, 90$0^{\circ}C$에서 L $a_{0.6}$S $r_{0.4}$ $Co_{0.2}$F $e_{0.8}$ $O_{3-}$$\delta$/ 분리막이 정상상태에서 0.266 mL/min.$\textrm{cm}^2$로 가장 많은 투과량을 보였으며 코팅된 L $a_{0.7}$S $r_{0.3}$G $a_{0.6}$F $e_{0.4}$ $O_{3-}$$\delta$/ 분리막의 정상상태 산소 투과 유속은 최고 0.19 mL/min.$\textrm{cm}^2$ 정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.정도로 코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다.코팅되지 않은 분리막에 비해 약 2~3배로 높게 나타났다. 높게 나타났다.

  • PDF

서울 성동구 지역 미세먼지의 화학적 조성에 관한 연구 (A Study on Chemical Composition of Fine Particles in the Sungdong Area, Seoul, Korea)

  • 조용성;이홍석;김윤신;이종태;박진수
    • 한국환경과학회지
    • /
    • 제12권6호
    • /
    • pp.665-676
    • /
    • 2003
  • 본 연구는 서울지역의 PM$_{2.5}$의 화학적 조성을 조사하기 위하여 2000년 10월 1일부터 200l년 9월 26일까지 계절별(봄, 여름, 가을 겨울)로 PM$_{2.5}$ dichotomous air sampler를 이용하여 포집한 후, ICP-MS를 이용하여 검출한계 이상인 13가지의 중금속 성분(Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mn, Pb, Si, V, Zn)과 IC를 이용하여 5가지의 수용성 이온성분($Na^{+}$, NH$_4$$^{+}$, Cl ̄, NO$_3$$^{-}$ , SO$_4$$^2$ ̄)을 측정/분석하였다. 분석결과에 얻어진 PM$_{2.5}$의 농도와 화학적 성분의 농도를 계절별로 비교하였으며, 중금속 성분의 정성적인 발생원의 기여도를 파악하기 위하여 주성분 분석을 실시하였다.1) 조사기간 중 PM$_{2.5}$의 계절별 농도는 겨울(33.91 $\mu\textrm{g}$/㎥) > 봄(28.79 $\mu\textrm{g}$/㎥) > 가을(18.62 $\mu\textrm{g}$/㎥) >여름(14.92 $\mu\textrm{g}$/㎥) 순으로 조사되어 주로 겨울철에 대기중 PM$_{2.5}$의 농도가 높은 것을 확인할 수 있었다. PM$_{10}$에 대한 PM$_{2.5}$의 기여도는 33.7~83.5 %로 나타났으며, PM$_{2.5}$PM$_{10}$의 평균비는 0.54로 조사되었고, 회귀분석에서 PM$_{10}$=4.20PM$_{2.5}$+.9.91, $R^2$=0.73 (p < 0.05)의 회귀관계식을 나타나 PM$_{2.5}$로 PM$_{10}$을 73% 수준에서 설명할 수 있었으며 통계적으로 유의한 값을 보였다. 2) PM$_{2.5}$의 중금속 성분은 Si > Fe > Al> Zn >Ca>Ba>V>Pb>As>Cu>Cr>Cd 순으로 높은 농도를 보였다. 중금속 성분의PM$_{2.5}$PM$_{10}$의 비는 인위적인 발생원에서 기인하는 Cd, Cr, Pb, V, Zn과 같은 중금속 성분의 비율이 높은 조사되었고, 자연적인 발생원에서 기인하는 Al, Ca, Fe, Mn, Si와 같은 중금속 성분의 비율이 낮게 조사되었다 특히 Al, Ca, Fe의 비율이 봄철에 높아 중국에서 발생한 황사의 영향을 받은 것으로 사료된다. 3) PM$_{2.5}$ 중 이온 성분의 농도는 NO$_3$ ̄ > SO$_4$$^2$ ̄ > Cl ̄ > NH$_4$$^{+}$ 순으로 조사되었으며, PM$_{2.5}$PM$_{10}$의 비를 조사한 결과, NO$_3$ ̄,SO$_4$$^2$ ̄, Cl ̄의 비율이 높아 PM$_{10}$에 포함되어 있는 PM$_{2.5}$가 산성오염물질에 많은 영향을 받는 것으로 조사되었다 4) PM$_{2.5}$의 정성적인 발생원을 추정하기 위해 중금속 성분에 대한 주성분 분석의 결과 3개의 주성분으로 나누어 졌으며, 주요 발생원은 자연발생원인 토양성분과 석유연료 연소에서 배출되는 성분으로 추정되어 이 발생원이 중금속 성분 농도에 영향을 미치는 것으로 사료되며, PM$_{2.5}$의 화학적 성분은 지역여건과 기상조건, 계절변동에 많은 영향을 받는 것으로 사료된다. 이상의 연구결과에서 PM$_{10}$에 비해 인체에 유해한 화학적 성분(중금속, 이온 성분)이 포함되어 있는 PM$_{2.5}$에 대한 철저한 관리 및 규제 설정이 요구되며, 측정지점의 특성상 자동차 배기가스와 금속제련 및 가공에 의한 영향을 주로 받는 것으로 추정되었다 또한 지역여건과 기상조건에 영향을 많이 받는 PM$_{2.5}$에 대한 지속적인 연구와 자료축적이 요구되고 발생원에 대한 정량적인 기여도를 평가하기 위한 연구가 필요하다고 생각된다. 연구가 필요하다고 생각된다.기 위한 연구가 필요하다고 생각된다. 연구가 필요하다고 생각된다.

나무딸기(복분자(覆盆子)) 과즙색소(果汁色素) Anthocyanin의 안정성(安定性)에 관한 연구(硏究) (Stability of Anthocyanin Pigment from Juice of Raspberries)

  • 박정미;주광지
    • 한국식품영양과학회지
    • /
    • 제11권3호
    • /
    • pp.67-74
    • /
    • 1982
  • 나무딸기 과즙으로부터 추출한 anthocyanin 색소의 안정성에 관하여 pH, 온도, 유기산, 무기염, 금속이온 등에 대한 영향을 검토한 결과 특히 유기산과 무기염에 의하여 농색화 효과를 나타내었고 또한 지속적인 안정성을 가지므로 이를 관찰하여 보고한다. (1) 상온에서 pH 1$\sim$7의 완충용액에 나무딸기 과즙 색소 anthocyanin을 가하였을 때 초기흡광도는 pH가 낮을수록 높았으며 7일간 저장 중 색소의 분해속도는 pH 1과 2가 과즙색소의 pH인 3.7보다 더 빨랐다. 총색소의 잔존량은 pH 7.0 에서 가장 낮았고 pH 3.7에서 가장 많았다. (2) 온도에 대한 영향은 $40^{\circ}C$에서 6시간 후 색소 잔존율은 약 28%, $5^{\circ}C$에서 약 70%로써 온도가 낮을수록 색소잔존율이 높았다. (3) 유기산 첨가시 흡광도 변화는 첨가농도 증가와 함께 색소액의 흡광도가 증대되었으며 그 순위는 formic acid>acetic acid>n-butyric acid>propionic acid로 나타났다. Formic acid의 농색화 효과는 40일 저장후 무첨가구보다 약 10.3배이며 tartaric acid 약 4배, malic acid 약 3.9배, citric acid 약 3.8배 등의 순으로 농색화가 관찰되어졌다. (4) 무기염 첨가농도에 따른 anthocyanin의 농색화 효과의 순위는 sodium perchlorate>sodium sulfate>sodium chloride>sodium phosphate, monobasic로 나타났다. (5) 금속이온에 의하여 색소용액은 저장 5일에 크게 감소되었으며 저장중 $Cu^{2+}$, $Al^{3+}$의 감소율이 가장 컸으며 $Fe^{2+}$은 비교적 감소율이 작았다.

  • PDF

Electrochemical Characteristics of Zn and Si Ion-doped HA Films on Ti-6Al-4V by PEO Treatment

  • Lim, Sang-Gyu;Hwang, In-Jo;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2016년도 추계학술대회 논문집
    • /
    • pp.199-199
    • /
    • 2016
  • Commercially pure titanium (cp-Ti) and Ti alloys (typically Ti-6Al-4V) display excellent corrosion resistance and biocompatibility. Although the chemical composition and topography are considered important, the mechanical properties of the material and the loading conditions in the host have, conventionally. Ti and its alloys are not bioactive. Therefore, they do not chemically bond to the bone, whereas they physically bond with bone tissue. The electrochemical deposition process provides an effective surface for biocompatibility because large surface area can be served to cell proliferation. Electrochemical deposition method is an attractive technique for the deposition of hydroxyapatite (HAp). However, the adhesions of these coatings to the Ti surface needs to be improved for clinical used. Plasma electrolyte oxidation (PEO) enables control in the chemical com position, porous structure, and thickness of the $TiO_2$ layer on Ti surface. In addition, previous studies h ave concluded that the presence of $Ca^{+2}$ and ${PO_4}^{3-}$ ion coating on porous $TiO_2$ surface induced adhesion strength between HAp and Ti surface during electrochemical deposition. Silicon (Si) in particular has been found to be essential for normal bone and cartilage growth and development. Zinc (Zn) plays very important roles in bone formation and immune system regulation, and is also the most abundant trace element in bone. The objective of this work was to study electrochemical characteristcs of Zn and Si coating on Ti-6Al-4V by PEO treatment. The coating process involves two steps: 1) formation of porous $TiO_2$ on Ti-6Al-4V at high potential. A pulsed DC power supply was employed. 2) Electrochemical tests were carried out using potentiodynamic and AC impedance methoeds. The morphology, the chemical composition, and the micro-structure an alysis of the sample were examined using FE-SEM, EDS, and XRD. The enhancements of the HAp forming ability arise from $Si/Zn-TiO_2$ surface, which has formed the reduction of the Si/Zn ions. The promising results successfully demonstrate the immense potential of $Si/Zn-TiO_2$ coatings in dental and biomaterials applications.

  • PDF

중금속 제거용 흡착제로서의 철광사 적용 (Application of Iron Sand as Adsorbent for the Removal of Heavy Metal)

  • 양재규;유목련;이승목
    • 대한환경공학회지
    • /
    • 제27권11호
    • /
    • pp.1180-1185
    • /
    • 2005
  • 본 연구에서는 철이 주성분 이면서 다양한 금속산화물의 조성을 갖는 채광물질인 철광사(Iron Sand)를 구리 혹은 납을 함유한 합성폐수 처리에 대한 적용성을 조사하였다. 먼저 철광사의 내산성을 조사하기 위해 pH $2{\sim}4.5$ 범위에서 철 및 알루미늄의 용출특성을 조사였을 때, 가장 많은 조성을 갖는 철의 용출량은 강산성인 pH 2에서도 수질오염 배출기준 이하로 나타났다. 알루미늄의 경우 pH 2에서는 상당량의 용출현상이 나타났지만 pH 3 이상에서는 용출농도가 급격히 감소하였다. 이러한 내산성 실험결과는 철광사를 pH 3 이상에서의 폐수처리에 적용하는 데는 큰 문제가 없는 것을 제시한다. 철광사의 중금속 흡착능력을 조사하기 위해 구리 및 납을 흡착질로 사용하고 실험실 규모의 회분식 흡착실험과 칼럼 여과실험을 실시하였다. pH 5에서 철광사에 의한 구리이온의 제거는 반응초기 시간대에 빠르게 이루어졌으며 2시간이 경과되었을 때 구리 주입량의 50%가 제거되었으며 24시간 경과 후에 거의 완전한 흡착평형에 도달하였다. 철광사에 대한 Cu(II) 및 Pb(II)의 흡착은 pH 2 이상에서 증가되기 시작하였으며 pH 6 이상에서는 거의 모든 흡착질들이 제거되는 전형적인 양이온형 흡착경향을 보였다. 철광사에 대한 구리 및 납 흡착질의 농도비 변화에 따른 흡착등은 실험결과, 구리 및 납의 최대 흡착량은 각각 2,170 mg/kg 및 3,450 mg/kg으로 나타났다.

Identification and Characterization of Protein Encoded by orf382 as $\small{L}$-Threonine Dehydrogenase

  • Ma, Fei;Wang, Tianwen;Ma, Xingyuan;Wang, Ping
    • Journal of Microbiology and Biotechnology
    • /
    • 제24권6호
    • /
    • pp.748-755
    • /
    • 2014
  • In the genome annotation of Escherichia coli MG1655, the orf382 (1,149 bp) is designated as a gene encoding an alcohol dehydrogenase that may be Fe-dependent. In this study, the gene was amplified from the genome by PCR and overexpressed in Escherichia coli BL21(DE3). The recombinant $6{\times}$His-tag protein was then purified and characterized. In an enzymatic assay using different hydroxyl-containing substrates (n-butanol, $\small{L}$-threonine, ethanol, isopropanol, glucose, glycerol, $\small{L}$-serine, lactic acid, citric acid, methanol, or $\small{D}$-threonine), the enzyme showed the highest activity on $\small{L}$-threonine. Characterization of the mutant constructed using gene knockout of the orf382 also implied the function of the enzyme in the metabolism of $\small{L}$-threonine into glycine. Considering the presence of tested substrates in living E. coli cel ls and previous literature, we believed that the suitable nomenclature for the enzyme should be an $\small{L}$-threonine dehydrogenase (LTDH). When using $\small{L}$-threonine as the substrate, the enzyme exhibited the best catalytic performance at $39^{\circ}C$ and pH 9.8 with $NAD^+$ as the cofactor. The determination of the Km values towards $\small{L}$-threonine (Km = $11.29{\mu}M$), ethanol ($222.5{\mu}M$), and n-butanol ($8.02{\mu}M$) also confirmed the enzyme as an LTDH. Furthermore, the LTDH was shown to be an ion-containing protein based on inductively coupled plasma-atomic emission spectrometry with an isoelectronic point of pH 5.4. Moreover, a circular dichroism analysis revealed that the metal ion was structurally and enzymatically essential, as its deprivation remarkably changed the ${\alpha}$-helix percentage (from 12.6% to 6.3%).