• 제목/요약/키워드: Fe ion

검색결과 1,131건 처리시간 0.027초

배양된 대뇌피질세포에서 산화성 손상에 대한 6R-Tetrahydrobiopterin의 억제작용 (Study on the Protective Effects of 6R-Tetrahydrobiopterin on the Oxidative Neuronal Injury in Mouse Cortical Cultures)

  • 문경섭;이제혁;강삼석;김수한;김재휴;정신;김태선;이정길
    • Journal of Korean Neurosurgical Society
    • /
    • 제30권9호
    • /
    • pp.1059-1064
    • /
    • 2001
  • Objective : 6R-Tetrahydrobiopterin(BH4) is a cofactor for the aromatic amino acid hydroxylases which is essential for the biosynthesis of catecholamines and serotonin. It also acts as a cofactor for nitric oxide synthase, and stimulates the release of some neurotransmitters such as dopamine, serotonin, acetylcholine and glutamate. Recently, it has been reported that BH4 could induce cellular proliferation and enhance neuronal survival. This study was performed to investigate the antioxidative effect of BH4 on the various oxidative insults in mouse cerebral cortical cell cultures. Methods : Iron ion(FeCl2), zinc ion(ZnCl2), sodium nitroprusside(SNP) and buthionine sulfoximine(BSO, a glutathione depletor) were used as oxidants. Cell death was assessed by measurement of lactate dehydrogenase efflux to bathing media at the end of exposure. Result : All 4 oxidants induced neuronal cell death associated with cell body swelling, which was markedly inhibited by trolox($100{\mu}M$), a vitamin E analog. BH4($10-100{\mu}M$) markedly inhibited the neuronal cell death induced by all 4 oxidants($20{\mu}M\;Cu^{2+}$, $20{\mu}M\;Zn^{2+}$, $1{\mu}M$ SNP or 1mM BSO). However, BH4 failed to inhibit the neuronal cell death induced by 24hr exposure to $20{\mu}M$ NMDA. Conculsion : These results suggest that BH4 has antioxidative action independently of any actions of enzyme cofactor.

  • PDF

Pulsed laser deposition 방법으로 증착된 $(Bi,Ce)_4Ti_3O_{12}$ 박막의 강유전 특성 (Characteristic of ferroelectric properties of $(Bi,Ce)_4Ti_3O_{12}$ thin films deposited by pulsed laser deposition)

  • 오영남;성낙진;윤순길;전민구;우성일;김창수
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.168-171
    • /
    • 2003
  • Bismuth layered structure, Cerium-substituted $Bi_4Ti_3O_{12}$ ($(Bi,Ce)_4Ti_3O_{12}$) thin films were prepared on the $Pt/TiO_2/SiO_2/Si$ substrates by the pulsed laser deposition method. We investigated the Ce-subsitituted effect on the grain orientation and ferroelectric properties. $Ce^{3+}$ ion substitution for $Bi^{3+}$ ion in perovskite layers of BTO decreased the deeree of c-axis orientation and increased the remanent polariation (2Pr). The structure and morphology of the films were characterized using X-ray diffraction and atomic force microscopy. The $(Bi,Ce)_4Ti_3O_{12}$ (BCT) thin films, which were annealed $700^{\circ}C\;and\;800^{\circ}C$ for 10min and 30min, showed a perovskite phase and dense microstructure. As the thickness of the BCT film was decresed that the ferroelectric properties of the BCT thin films were good.

  • PDF

교정용 와이어의 표면특성에 미치는 TiN 및 ZrN 코팅영향 (Effects of TiN and ZrN Coating on Surface Characteristics of Orthodontic Wire)

  • 김원기;김도영;최한철
    • 한국표면공학회지
    • /
    • 제41권4호
    • /
    • pp.147-155
    • /
    • 2008
  • The dental orthodontic wire provides a good combination of strength, corrosion resistance and moderate cost. The purpose of this study was to investigate the effects of TiN and ZrN coating on corrosion resistance and physical property of orthodontic wire using various instruments. Wires(round type and rectangular type) were used, respectively, for experiment. Ion plating was carried out for wire using Ti and Zr coating materials with nitrogen gas. Ion plated surface of each specimen was observed with field emission scanning electron microscopy(FE-SEM), energy dispersive X-ray spectroscopy(EDS), atomic force microscopy(AFM), vickers hardness tester, and electrochemical tester. The surface of TiN and ZrN coated wire was more smooth than that of other kinds of non-coated wire. TiN and ZrN coated surface showed higher hardness than that of non-coated surface. The corrosion potential of the TiN coated wire was comparatively high. The current density of TiN coated wire was smaller than that of non-coated wire in 0.9% NaCl solution. Pit nucleated at scratch of wire. The pitting corrosion resistance $|E_{pit}-E_{rep}|$ increased in the order of ZrN coated(300 mV), TiN coated(120 mV) and non-coated wire(0 mV).

Electrochemical characteristics of Ca, P, Sr, and Si Ions from PEO-treated Ti-6Al-4V Alloy Surface

  • Yu, Ji-Min;Choe, Han-Cheol
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2017년도 춘계학술대회 논문집
    • /
    • pp.154-154
    • /
    • 2017
  • Ti-6Al-4V alloys are widely used as metal-lic biomaterials in dentistry and orthopedics due to its excellent biocompatibility and me-chanical properties. However, because of low biological activity, it is difficult to form bone growth directly on the surface of titanium implants. For this reason, surface treatment of plasma electrolytic oxidation(PEO) was used for dental implants. To enhance bioac-tivity on the surface, strontium(Sr) and sili-con(Si) ions can be added to PEO treated sur-face in the electrolyte containing these ions. The presence of Sr in the coating enhances osteoblast activity and differentiation, where-as it inhibits osteoclast production and prolif-eration. And Si has been found to be essen-tial for normal bone, cartilage growth, and development. In this study, electrochemical characteristics of Ca, P, Sr, and Si ions from PEO-treated Ti-6Al-4V alloy surface was re-searched using various experimental instruments. DC power is used and Ti-6Al-4V al-loy was subjected to a voltage of 280 V for 3 minutes in the electrolyte containing 5, 10, 20M% Sr ion and 5M% Si ion. The morphol-ogies of PEO-treated Ti-6Al-4V alloy by electrochemical anodization were examined by field-emission scanning electron micro-scopes (FE-SEM), energy dispersive x-ray spectroscopy (EDS), x-ray diffraction (XRD) and corrosion analysis using AC impedance and potentiodynamic polarization test in 0.9% NaCl solution at similar body tempera-ture using a potentiostat with a scan rate of 1.67mV/s and potential range from -1500mV to + 2000mV.

  • PDF

Purification and Characterization of Chitinolytic Enzymes Produced by Aeromonas sp. J-5003

  • Choi Yong Un;Kang Ji Hee;Lee Myung Suk;Lee Won Jae
    • Fisheries and Aquatic Sciences
    • /
    • 제6권1호
    • /
    • pp.7-12
    • /
    • 2003
  • Chitinase and chitobiase produced by Aeromonas sp. J-5003 were purified and characterized. The chitinase was purified to 19.4 folds by gel chromatography and ion-exchange chromatography with the overall yield of $2.2\%$ and the specific activity of 93.1 unit/mg. The purified enzyme showed a single band on SDS-PAGE with MW 54kDa. The optimum pH and temperature of the purified chitinase were 7.0 and $37^{\circ}C$, respectively, and this enzyme stable in the range of pH 6.0 to 10.0 below $37^{\circ}C$. $Mg^{2+},\;Ca^{2+}\;and\;Na^+$ slightly stimulated the chitinase activity. However, $Hg^{2+}\;and\;Fe^{3+}$ inhibited chitinase activity. The chitobiase was purified by Sephacryl HR-l00 gel chromatography and DEAE-Sephadex A-50 ion-exchange chromatography with 33.5 purification folds and $4.3\%$ yield. The purified enzyme showed a single band with MW 63 kDa. The optimum pH and temperature of the purified chitobiase were 7.0 and $37^{\circ}C$, respectively. And this enzyme was stable in the range of pH 6.0 to 9.0 and at the temperature below $37^{\circ}C$. The enzyme activity was increased by $Mn^{2+}$, but it was inhibited by $Ag^+$.

해양방선균으로부터 Haloperoxidase의 검색과 특성 (Screening and Partial Purification of Haloperoxidase from Marine Actinomycetes)

  • 조기웅
    • 미생물학회지
    • /
    • 제44권2호
    • /
    • pp.116-121
    • /
    • 2008
  • Haloperoxidase를 생산하는 미생물을 분리하기 위하여 국내 연근해와 남북극 등의 해양시료에서 분리된 방선균 균주를 대상으로 탐색을 수행하여 남해 백도 해조류 추출물로부터 분리된 한 종류의 방선균(#1460)에서 높은 haloperoxidase 활성이 확인되었다. 본 균주의 생리.생화학적 특성은 Streptomyces 속과 유사하며 생산되는 haloperoxidase는 세포 조 추출물로부터 ammonium sulfate precipitation, High-Q column chromatography, gel permeation chromatography, Hydroxyapetite chromatography 그리고 hydrophobic interaction chromatography를 통하여 42%의 수율과 purification fold 70으로 정제하였다. 본 효소의 최적 반응 pH는 7이고 pH 8에서 더 높은 안정성을 보여 $60^{\circ}C$에서 1시간 반응에 효소활성의 50%가 생존한다. 또 cyanide와 azide 이온에 의해 강한 저해현상을 보인다.

Bifidobacterium longum KCTC 3215에 의한 $\beta$-Galactosidase의 생산. 정제 및 특성 (Production, Purification and Characterization of $\beta$-Galactosidase from Bifidobaacterium longurn KCTC 3 2 15)

  • 강국희;민해기;장영효;이호근
    • 한국미생물·생명공학회지
    • /
    • 제19권5호
    • /
    • pp.456-463
    • /
    • 1991
  • Bif. longum KCTC 3215에 의한 Beta-galactosidase의 최적생성조건은 탄소원으로 lactose 1.0, 초기 pH 7.0, 배양온도 $37^{\circ}C$ 및 배양시간 17시간 후였다. 이 효소는 protamine sulfate, ammonium sulfate, DEAE-Sephadex A-50 ion exchange chromatography 및 Sephadex G-150 gel filtration 등 4단계 정제과정을 거쳐 9.25배 정제되었다.

  • PDF

황련(黃連)의 생리활성검증 및 화장품 소재로서의 이용 가능성 (A Study on Physiological Activities of Coptidis Rhizoma and Application for Cosmetic Ingredients)

  • 이진태;이창언;김준홍;손준호;곽재훈;이진영;박태순;배호정;장민정;조철훈;안봉전
    • 대한본초학회지
    • /
    • 제20권3호
    • /
    • pp.83-92
    • /
    • 2005
  • Objectives : The physiological activities of Coptidis Rhizoma investigated for application as a cosmetic ingredients. Methods : We were experimented anti-oxidation effect, growth inhibition ability on cancer cells, antibacterial activity on various kinds of bacteria of skin. Results : The results were obtained as follows : Electron-donating ability(EDA) shows that Coptidis Rhizoma extracted with ethanol(94.51%) gives higher EDA in comparison to that extracted with water in 1000 ppm(63.24%). In the test of SOD-like activity, ethanol extract showed quite more activity with 81.01% in 1000 ppm, while water extract was low in 18.22%. In the inhibition activity of Xathine oxidase, ethanol extract showed higher inhibition activity compared to water extract. In measuring lipid oxidation inhibition ability using fish oil, ethanol extract in 100 ppm showed prominent ability. In the oxidation inhibition effect added with $Cu^{2+}\;ion\;and\;Fe^{2+}$ ion as a oxidation promoter, ethanol extract in 1000 ppm, each in the proportion of 90% and 92%, showed high oxidation inhibition effect compared with water extract. Conclusions : The results indicated that, ethanol extract which is superior in its anti-oxidation and antibacterial effect is useful to be applied in cosmetic industry.

  • PDF

EFFECTS OF SURFACTANTS ON THE FENTON DEGRADATION OF PHENANTHRENE IN CONTAMINATED SEDIMENTS

  • Jee, Sang-Hyun;Ko, Seok-Oh;Jang, Hae-Nam
    • Environmental Engineering Research
    • /
    • 제10권3호
    • /
    • pp.138-143
    • /
    • 2005
  • Laboratory batch experiments were conducted to evaluate the Fenton degradation rates of phenanthrene. Fenton reactions for the degradation of phenanthrene were carried out with aqueous and slurry phase, to investigate the effects of sorption of phenanthrene onto solid phase. Various types of surfactants and electrolyte solutions were used to evaluate the effects on the phenanthrene degradation rates by Fenton's reaction. A maximum 90% removal of phenanthrene was achieved in aqueous phase with 0.9% of $H_2O_2$ and 300 mg/L of $Fe^{2+}$ at pH 3. In aqueous phase reaction, inhibitory effects of synthetic surfactants on the removal of phenanthrene were observed, implying that surfactant molecules acted as strong scavenger of hydroxyl radicals. However, use of $carboxymethyl-{\beta}-cyclodextrin$ (CMCD), natural surfactant, showed a slight enhancement in the degradation of phenanthrene. It was considered that reactive radicals formed at ternary complex were located in close proximity to phenanthrene partitioned into CMCD cavities. It was also show that Fenton degradation of phenanthrene were greatly enhanced by addition of NaCl, indicating that potent radical ion ($OCI^-$) played an important role in the phenanthrene degradation, although chloride ion might be acted as scavenger of radicals at low concentrations. Phenanthrene in slurry phase was resistant to Fenton degradation. It might be due to the fact that free radicals were mostly reacting with dissolved species rather than with sorbed phenanthrene. Even though synthetic surfactants were added to increase the phenanthrene concentration in dissolved phase, low degradation efficiency was obtained because of the scavenging of radicals by surfactants molecules. However, use of CMCD in slurry phase, showed a slight enhancement in the phenanthrene degradation. As an alternative, use of Fenton reaction with CMCD could be considered to increase the degradation rates of phenanthrene desorbed from solid phase.

구리, 니켈, 코발트, 철 혼합용액(混合溶液)으로부터 구리의 제거(除去) (Removal of Copper from the Solution Containing Copper, Nickel, Cobalt and Iron)

  • 박경호;남철우;김현호
    • 자원리싸이클링
    • /
    • 제22권6호
    • /
    • pp.48-54
    • /
    • 2013
  • 니켈, 코발트와 철의 혼합용액에 미량 함유되어 있는 구리 (399 ppm 구리, 208 ppm 철, 15.3 g/L 니켈, 2.1 g/L 코발트)를 분리, 제거를 위한 방법들을 검토하였다. 중화침전법의 경우 용액의 pH가 7.0 에서 구리는 철과 함께 전부 수산화물로 침전, 제거되었으나 니켈과 코발트의 일부도 함께 침전되었다. 황화침전법의 경우 1.25% 농도의 $Na_2S$를 구리의 2당량비 첨가하고 용액의 pH가 1.0인 경우 구리가 99.7% 제거 되었다. TP207 양이온 흡착제를 사용한 이온교환수지법은 평형 pH 2.0 에서 구리만이 선택적으로 흡착되었으며 탈착용액으로는 5% 황산이 적당하였다.