• Corrosion Science and Technology
• /
• v.23 no.1
• /
• pp.33-40
• /
• 2024

The concentration and diffusion coefficient of oxide ion vacancies in the oxide scale formed on Fe-22Cr-0.5Mn ferritic stainless steel with and without molybdenum (Mo) was measured at 800℃ by the electrochemical polarization method. After pre-oxidation for 100 h in ambient air at 800 ℃, the oxide scale on one side was completely removed with sandpaper. A YSZ plate was placed on the side where the oxide scale remained. Platinum (Pt) meshes were attached on the top of the YSZ plate and the side where the oxide scale was removed. Changes in electrical current were measured after applying an electrical potential through Pt wires welded to the Pt meshes. The results were interpreted by solving the diffusion equation. The diffusion coefficient and concentration of oxide ion vacancy decreased by 30% and 70% in the specimen with Mo, respectively, compared to the specimen without Mo. The oxide ion vacancy concentration of chromia decreased due to the addition of Mo.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1248-1256
• /
• 2014

The purpose of this study was to investigate the mechanisms of behind $SO_2$ formation and elevated cause of reducing power in purple bamboo salt (PBS) along with an analysis of physicochemical properties, content of sulfur compounds, oxidation reduction potential (ORP), mineral contents of salt type (MSS, mudflat solar salt; BS, bamboo salt), and addition of raw bamboo (RB). $SO_2$ content of 630 ppm was detected in PBS. $SO_2$ was not detected in MSS, BS, or RB, whereas $SO_2$ (782 ppm) from $K_2SO_4$ was detected after heating a NaCl, KCl, $MgCl_2$, $MgSO_4$, MgO, $CaCl_2$, $K_2SO_4$, and $FeSO_4$ with RB. $SO_2$ content of BS increased with baking time, and it originated from BSRB1 (13.88 ppm) to BSRB4 (109.13 ppm). $SO_3{^{2-}}$ originated only from MSSRB4 and BSRB2~BSRB4. Sulfate ion content decreased along with increasing $SO_2$ and sulfite ion contents. ORP increased with baking time of MSS and BS, and it was present at higher levels in BSRB4 (-211.40 mV) of BS than MSS. Insoluble content was higher in BS than MSS. Further, Ca, K, and Mg ion contents decreased in MSS and increased in BS with baking time. BSRB4 had 1.4 fold higher levels of Ca, 1.5 fold higher levels of Mg, and 1.8 fold higher levels of K than BS. Li, Al, Mn, Fe, and Sr in MSS as well as Al, Fe, and Ni in BS increased with baking time. Anions (Cl, $NO_3$, and Br) and heavy metals (Pb, Cd, Hg, and As) between MSS and BS were not significantly different. These results suggest that the reducing power of BS was due to $SO_2$ and sulfite ion. To increase the amounts of these compounds and reducing power, higher melting temperature and longer baking time are necessary along with BS, which is created by the addition of RB to roasted salt.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.253-259
• /
• 1997

The iron doped GaAs single crystals were grown by liquid phase epitaxial method and its some physical properties were evaluated with a view to investigate the crystal quality and emission property. The isomer shift of 0.303mm/sec is calculated from low-temperature M ssbauer spectroscopy and we know that charge state of iron ion is 3+ in GaAs crystal. In low temperature photoluminescence, the deep emission bands with wide-line width have been observed at 0.99eV and 1.15eV in addition to sharp excitonic peaks. We attributed that these deep emissions are originated from substitutional Fe-acceptor which has charge state of 3+ and 2+, respectively.

• Journal of the Korean Vacuum Society
• /
• v.10 no.3
• /
• pp.312-320
• /
• 2001

A Non-Evaporable Getter(NEG) pump was fabricated using Zr-V-Fe alloy modules to obtain $10^{-9}$ Pa range pressures. Pumping performances and activation characteristics were investigated and the pumping speeds for hydrogen, deuterium and carbon monoxide gases of the NEG pump were measured. And hydrogen desorption characteristics were examined during activation at $450^{\circ}C$. Futhermore the vacuum performance was compared with those of other high vacuum pumps as turbo-molecular pump, sputter-ion pump, and cryo pump by analyzing the residual gases of the system.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.1
• /
• pp.47-62
• /
• 1991

Yellow Sand Phenomena was observed from April 8 th to 10 th in 1990. During this period particle was collected to investigate the chacteristics of chemical composition of particulate by High Volume Air Sampler and Andersen Air Sa~npler in Seoul. During this period the particle concentration was 350 yg/$m^3$ and the anions, cations, and metal concentrations were increased and the orders of these were $S0_4\;^{-2}>N0_3\;^->Cl^->F^-, Na^+>Ca^{+2}>NH_4\;^+>Mg^{2+}>K^+$, and Fe>Al>Si>Zn>Pb respectively. The principal source of Yellow Sand were identified soil and sea salt. Mn used by the trace element of soil, the persentage of contribution from soil was calculated to be about 81.3% for the particle increased by Yellow Sand Phenomena. Also the principal chemical compounds of particle were estimate metals(Fe, Al, Si, Zn) oxides, $CaSO_4, NaSO_4, MgSO_4, NaC1, MgCl_2$ and $(NH_4)_2SO_4$.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2000

We studied the adsorption characteristics on the treatment process of heavy metal wastewater by using cuttle fish bones powder. When adding the 0.25% cuttle fish born powder in the heavy metal solution, $Fe^{3+}$ and $Pb^{2+}$ were high removed than other heavy metals as above 95%. In the solution which was adjusted to pH 5, 7 and 9, there was not observed the difference thing on the heavy metal removal rate. At test using plating wastewater treatment, adding 1%, 1.5% and 2% of the cuttle fish born powder, the heavy metal removal rate were as follows; Zn 12.5 - 37.5%, Mn 18.0 - 62.2%, Cd 36.8 -93.0%, Cu 51.4 - 97.4%, Cr 70.8 - 99.1%, Fe 87.2 - 99.3% and Pb 92.8 - 99.9%. When adding the 0.15% cuttle fish born powder and mixing for 20 minutes, the solution was happened the adsorption equability. Applied this results to the Freundlich＇s iso-thermal equation, we found the cuttle fish born＇s probability as a good adsorbent.

• Applied Biological Chemistry
• /
• v.2
• /
• pp.9-14
• /
• 1961

The formation of sulfide from sulfate has been discussed from the thermodynamic principles. No mechanism of the reaction has been presented. From the stoichiometric and Nernst equations for the conversion of sulfate into sulfide, it was concluded that the formation of sulfide from sulfate can take place more readily if pH of a medium is low. The difficulty of this conversion increases with increasing pH. As pH of a medium increases, the degree of dissociation of H₂S into S= increases and this, in turn, renders the chance of precipitation of sulfide as FeS easier. Higher the pH of a soil or medium, greater is the S= concentration. The concentration of ferrous ion required to remove dissolved sulfide in a medium by forming insoluble FeS decreases with increasing pH. From the theory it was pointed out that an application of lime and iron rich foreign substances to a soil may be effective in causing the removal of dissolved sulfide from solution.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.3
• /
• pp.55-61
• /
• 2009

Fe-V is used as raw material of vanadium in the steel making process. The purpose of this study, Fe-V is to replace the $VO_{4}$. So the distribution behavior of vanadium in $VO_{4}$ of the steel investigated. The distribution ratio of the vanadium where potential of the free oxygen ion will increase in slag decreased. When CaO and MgO content which is a basic oxide from CaO-$SiO_2$-FetO-MgOsatd. slag increases, S distribution ratio increases. CaO-$SiO_2$-FetO-MgOsatd. slag better than CaO-$SiO_2$-$Al_2O_3$-MgO slag is the recovery of vanadum and desulfurization.

• Journal of the Korean Ceramic Society
• /
• v.47 no.6
• /
• pp.633-637
• /
• 2010

In this study, lithium manganese oxide spinel ($LiMn_{1.9}Fe_{0.1}Nb_{0.0005}O_4$) as a cathode material of lithium ion secondary batteries is synthesized with spray drying, and in order to increase its crystallinity and electrochemical properties, the granulated $LiMn_{1.9}Fe_{0.1}Nb_{0.0005}O_4$ particle surface is coated with lithium titanium oxide spinel ($Li_4Ti_5O_{12}$) through a sol-gel method. The granulated particles present a higher tap density and lower specific surface area. The crystallinity and discharge capacity of the $Li_4Ti_5O_{12}$ coated material is relatively higher than uncoated material. With the coating layer, the discharge capacity and cycling stability are increased and the capacity fading is suppressed successfully.

• Journal of Magnetics
• /
• v.6 no.1
• /
• pp.5-8
• /
• 2001

Cheju island is composed of volcanic tuff. The soil in Cheju island has principally sprung from basalt and partially made up of trachyte, and andesite. Also ancient relics, plain coarse pottery kilns and pantiles kilns are homogeneously distributed all over the Cheju island. In this study samples of plain coarse pottery and pantiles from five regions of Cheju island have been examined through X-ray fluorescence spectrometer and Mossbauer spectroscopy. It is thought that these samples be partially formed from neutral volcanic rock like trachyte and the valence state of iron is almost $Fe^{3+}$. Also the magnetic hyperfine field of goethite contained in these samples is less than synthetic goethite. This result shows the degradation of magnetic order caused by the partial substitution of diamagnetic positive ion $Fe^{3+}$ by $Al^{3+}$ in the goethite lattice.