• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.295-296
• /
• 1999

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2001년도 추계연구발표회 논문개요집
• /
• pp.88-89
• /
• 2001

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.434-438
• /
• 2018

The sintering behavior of $BaFe_{12}O_{19}$ with the addition of one and three weight % of $CuWO_4$ as a liquid phase sintering aid is studied. Samples are sintered in the temperature range $900-1250^{\circ}C$ and the effect of $CuWO_4$ addition on density, microstructure, phase composition and magnetic properties is examined. Compared to $BaFe_{12}O_{19}$ with no sintering aid addition, addition of 1 wt % $CuWO_4$ retards densification. Addition of 3 wt % $CuWO_4$ promotes densification at lower sintering temperatures but retards densification at temperatures > $1050^{\circ}C$. Three wt % $CuWO_4$ addition induces the formation of $BaWO_4$ and $Ba_3WFe_2O_9$ secondary phases at temperatures ${\geq}1100^{\circ}C$. Addition of $CuWO_4$ causes a decrease in saturation magnetization, remanent magnetization and coercivity.

• Journal of Animal Science and Technology
• /
• 제51권6호
• /
• pp.503-510
• /
• 2009

This study investigated the effects of tannic acid (TA) in the diets for weanling pigs prepared with/without supplemental Fe on performance, hematology, fecal microflora and diarrhea incidence. Limestone and calcium phosphate used in Experiment 1 and 2 were of semi-synthetic and feed-grade quality, respectively; while the trace-mineral premix used in both the experiments was prepared without any added Fe source. In Experiment 1, 108 weaned pigs (Landrace ${\times}$ Yorkshire ${\times}$ Duroc, initially 6.46 ${\pm}$ 1.04 kg BW) were allotted to 3 treatments including control (diet added with $FeSO_4$ and antibiotic), T1 (diet devoid of $FeSO_4$ and antibiotic) and T2 (T1 diet added with 125 mg/kg TA). Each treatment had 4 replicates with 9 pigs in each pen. Feeding of T1 diet had a negative effect on the performance and plasma Fe status of pigs, while addition of TA to T1 diet resulted in performance of pigs comparable to pigs fed the control diet, reduced diarrhea incidence but had a negative influence on the hematological and plasma Fe indices. Additionally, pigs fed T2 diet had fewer (p<0.05) total anaerobic bacteria, Clostridium spp. and coliforms than pigs fed T1 diet, and greater number of Bifidobacterium spp. and Lactobacillus spp. in feces when compared with pigs fed control and T1 diets. In Experiment 2, 144 weaned pigs (Landrace ${\times}$ Yorkshire ${\times}$ Duroc, initially 6.00 ${\pm}$ 1.07 kg BW) were allotted to 4 dietary treatments including control (diet added with $FeSO_4$ and antibiotic) and diets devoid of supplemental Fe added with antibiotic (An), TA and both (AnTA). Each treatment had 4 replicates with 9 pigs in each pen. Addition of An, TA or both to diets devoid of supplemental Fe did not have any effect on performance, blood hematology and plasma Fe but resulted in reduced (p<0.05) diarrhea incidence and lower (p<0.05) fecal coliform population than pigs fed the control diet. These results suggest that TA has a negative influence on blood hematology and plasma Fe status when diets are inadequate in Fe; however, TA reduced diarrhea incidence and might have antimicrobial activity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.33-34
• /
• 2005

In this study, in odor to develop low temperature sintering multilayer piezoelectric actuator and ultrasonic vibrator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$ and $Na_2CO_3$ as sintering aids and their piezoelectric and dielectric characteristics were investigated according to the addition of dopant CuO and $Fe_2O_3$, respectively. The CuO added PMN-PNN-PZT ceramics improved mechanical quality factor Qm due to the acceptor doping effect. And also, $Fe_2O_3$ reacted as softner in this composition system in addition to the increase of grain size and sinterability. Taking into consideration electromechanical coupling factor kp of 0.62, dielectric constant $\varepsilon_r$, of 1275, Piezoelectric $d_{33}$ constant of 377[pC/N] and mechanical quality factor Qm of 975, it was concluded that the ceramics with the $Fe_2O_3$, added composition sintered at 900[$^{\circ}C$] were best for the multilayer piezoelectric actuator and ultrasonic vibrator application.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.14-20
• /
• 2001

The structure, shape, size, and magnetic properties of Ni$_{0.5}$Cu$_{0.1}$Zn$_{0.4}$Fe$_2$O$_4$ have been investigated as a function of annealing temperatures. In order to control the microwave absorbing properties of ferrite-rubber composite and the complex losses (magnetic loss and conduction loss), the effect of carbon addition was also studied. It was found that the coercive force decreased with increasing heat-treatment temperatures. Relative complex permeability and reflection loss were measured by the network analyzer. As a result, the natural resonance occurred in the low frequency tinge, and the matching frequency of the ferrite-rubber composite prepared at 130$0^{\circ}C$ was found to be lower. As heat-treatment temperatures were increased, the magnetic loss ($\mu$$_{r}$", $\mu$$_{r}$′) and the dielectric loss ($\varepsilon$$_{r}$"/$\varepsilon$$_{r}$′) were increased. It was caused that the absorption characteristics of the absorber were improved. The conduction loss and magnetic loss were expected to be occurred together because two matching frequencies were shown with carbon addition. It was confirmed that the matching frequency of the microwave absorber could be controlled by controlling heat-treatment temperatures and carbon additions.ons.tions.

• 한국표면공학회지
• /
• 제48권1호
• /
• pp.1-6
• /
• 2015

Amino-carboxyl acid as a complexing agent in acid copper sulfate solution was utilized to improve the adhesion of immersion copper layer for steel wire. According to the tape test results, regardless of alloy composition of the wire, the adhesion of immersion copper layer was improved with the addition of amino-carboxyl acid. The incorporation of H and Fe in the plating layer was analyzed by TOF-SIMS. The H and Fe were detected at the entire coating layer without any addition of amino-carboxyl acid. However, with addition of amino-carboxyl acid, the H and Fe were scarcely detected at the coating layer.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.235-239
• /
• 2013

The effect of Dy addition on the microstructure and magnetic properties of the sintered NdFeB magnets was investigated. The results of the microstructure analysis showed that Dy-free and Dy-doped samples are composed of $Nd_2Fe_{14}B$ (P42/mnm) and a trace of Nd-rich phase. Dy addition reduces significantly the pole density factor of (004), (006) and (008) crystal faces as estimated by the Horta formula. Accordingly, the coercivity of the Dy-doped sample increases from 2038 $kA{\cdot}m^{-1}$ up to 2288 $kA{\cdot}m^{-1}$. The $H_{cj}(T)/M_s(T)$ versus $H^{min}_N/M_s(T)$ (Kronm$\ddot{u}$ller-plot) behavior shows that the nucleation is the dominating mechanism for the magnetization reversal in these two kinds of magnets, and two microstructural parameters of ${\alpha}_k$ and $N_{eff}$ are obtained. The Kronm$\ddot{u}$ller-Plot gives evidence for an increase of the ${\alpha}_k$ responsible for an increase of the coercivity as the result of the increase of the magnetic field as the magnetic domain reversed.

• 소성∙가공
• /
• 제26권2호
• /
• pp.95-100
• /
• 2017

In this study, the method of process design for side forming of a tooth part used for a component of automobile transmission was suggested using FE-simulations. To develop the side forming for the tooth part, in this paper, the shape factors of B.T.Pin was considered as design parameters. The shape factors of B.T.Pin were selected to be the round of pin, reinforced angle and reinforced length. Based on FE simulation results, appropriate shape factor without causing any defects was selected. In addition, to increase the strength of pin, the combination of shape factor having minimum stress after side forming was selected using FE-simulation. In addition, with design of a die set, cold side forming of the tooth part was experimented to estimate effectiveness of the designed B.T.Pin. From experiments, it was found that the tooth part with complete formation of the tooth was obtained without making any forming defects and punch fracture.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권9호
• /
• pp.1309-1315
• /
• 2000

Sixteen Large $White{\times}Landrace$ pigs 12 weeks of age, with an average body weight of $22.9{\pm}2.12kg$ were fed four experimental diets; a commercial grain-based grower diet (control); or a diet containing 20% of either sun-dried leucaena leaf meal (LLM), water soaked LLM or $FeSO_4-treated$ LLM, replacing the basal diet. There was a significant (p<0.05) decrease in live weight gain, feed intake and feed conversion efficiency (FCE) in pigs fed the diet containing sun-dried LLM. Growth rate, feed intake and FCE were not affected by the addition of water-soaked and FeSO4-treated LLM to the basal diet. Triiodothyronine $(T_3)$ and thyroxine $(T_4)$ levels in the blood plasma were not affected by the dietary treatments. Addition of $FeSO_4-treated$ LLM to the basal diet significantly (p<0.05) reduced the back fat thickness of the pigs.