• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.160-168
• /
• 2006

This study was performed to evaluate the effect of the addition of vegetable oils on Fenton treatment of PAHs-contaminated soil. Fenton reaction can be proceeded in the soils contaminated with PHAs only in the presence of $H_2O_2$ because of Fe content in the soil. In this case, optimum $H_2O_2$ concentration was 3%. When 17.5 mM $FeSO_4$(III) was added with 3% $H_2O_2$, the removal rate was increased up to 25%, whereas 19% of PAHs was removed with $H_2O_2$ alone. The addition of 1% of olive oil to the contaminated soil before the Fenton reaction or simultaneously increased the removal rate about 15%, compared to the case of Fenton reaction only. There were no significant differences in the removal rates of PAHs, regardless of different kinds and concentration of oils. (olive oil, soybean oil, and used-vegetable oil). The used-vegetable oils were not different from the new, expensive oils in the removal rate, so their use will be desirable in saving the money. In addition of 1% of olive oil after the reaction of 3% $H_2O_2$ and 2.5 mM $FeSO_4$(III), the removal rates of 3~4 and 5~6 ring compounds were increased 13% and 17%, respectively, compared to the case of Fenton reaction only.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.898-907
• /
• 1997

Fe-22Cr-5AI-X(X=Zr, Y)합금을 1143K, 고온 황화(P$s_{2}$=1.11x$10^{-7}$atm, P$O_{s}$ =3.11x$10^{-20atm}$) 및 황화/산화 (P$s_{2}$=8.31x$10^{-8}$atm, P$O_{s}$ =3.31x$10^{-18atm}$) 환경의 복합가스 분위기에서 1-30시간동안 노출하여 합금표면에 형성된 부식층을 관찰하여 SEM/EDS로 분석하였다. Fe-22Cr-5AI합금은 고온 부식환경에서 부식 생성물의 성장은 포물선법칙을 따르고 주요 성분은 결함이 많고 다공질인 철과 크롬의 황화물[(Fe, Cr)Sx]이므로 고온 내식성이 감소하였다. Zr을 1wt%첨가한 Fe-22Cr-5AI합금의 고온 부식거동은 Y을 1wt%첨가한 합금과 비슷한 거동을 나타내었다. 황화환경에서는 Cr의 선택 황화에 의한 크롬 황화물(CrS)이 생성되고 노출시간의 경과에 따라 (Fe, Cr)Sx나 (Cr, Fe)Sx 등의 황화물의 성장으로 고온 내식성이 감소하였다. 그러나 황화/산화환경에서는 초기에는 알루미늄산화물(A $I_{2}$ $O_{3}$)및 지르코늄산화물(Zr $O_{2}$)등이 생성되어 보호적이었으나 15시간이후 부터 (Fe, Cr)Sx나 (Cr, Fe)Sx 의 황화물의 성장으로 고온 내식성이 감소하였다.

• Korean Journal of Poultry Science
• /
• v.16 no.1
• /
• pp.17-22
• /
• 1989

In order to dull heat sensitivity of egg albumen, metal ions (aluminium, ferric, ferrous, copper) were added and functional properties or egg albumen were determined before and after heat treatment at $60^{\circ}C$ for 5 minutes. Effect of pH on heat sensitivity of aluminium salt added egg albumen was also determined. Addition of metal ions increased turbidity of egg albumen before and after the heat treatment. Changes of the turbidity were minimized by addition of aluminium salt. The foaming power was markedly increased by addition of ferric salt before the heat treatment and increased by addition of aluminium, ferric and copper salt after the heat treatment. Before the heat treatment the foam was stable by addition of ferric and ferrous salt but after the heat treatment it was stable by addition of aluminium and ferric salt. The turbidity and foaming property of the egg albumen with aluminium salt were not largely changed after the heat treatment at pH range 7 to 8.5. Over pH 9 the turbidity and foaming power were not decreased, but the foam stability was increased before and after the heat treatment. Salmonella typhimurium ATCC 14028 (10$^{6}$ cells/$m\ell$) inoculated in egg albumen at pH range 7 to 8.5 was destructed by the heat treatment.

• Journal of the Korean Chemical Society
• /
• v.27 no.3
• /
• pp.194-200
• /
• 1983

Effect of metallic salts added to the ${\alpha}-Fe_2O_3-HCl\;or\;{\alpha}-Fe_2O_3-H_2SO_4$ reaction systems were investigated by colorimetric and gravimetric determinations. While reductive salts exhibited remarkably enhanced reaction rate, non-reductive salts showed inhibitive results. We supposed that the improvement of dissolution rate of ${\alpha}-Fe_2O_3$ by the addition of $FeCl_2$, a reductive salt, to the ${\alpha}-Fe_2O_3-HCl$ system can be attributed to the formation of chloro-bridge between $Fe^{3+}\;and\; Fe^{2+}$, and therefore some partial electronic charge transfer from $Fe^{2+}\;to\;Fe^{3+}$ on the surface of ${\alpha}-Fe_2O_3$ will be easily achieved through the bridged bond. The transferred charge to the surface will reduce the positive charge of initial $Fe^{3+}$, and also result to reduce the lattice energy of that site. Assuming tothat there is a linear relationship between the lattice energy change and the change of activation energy of the reaction system, the transferred partial electronic charge to $Fe^{3+}$ of ${\alpha}-Fe_2O_3$ surface was calculated to be ca. 0.36e.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.34-39
• /
• 2011

Metallurgical grade silicon(MG-Si) was melted with Ca at 1500$^{\circ}C$ under Ar atmosphere. The sample was cooled at 10 $^{\circ}C$/min to room temperature and leached in aqua regia. In the present study, the effect of Ca addition and conditions of acid leaching on removal of Fe and P in MG-Si were investigated. CaSi$_2$ phase was formed at the grain boundary of MG-Si melting with Ca. Also FeSi$_2$ phase was precipitated in CaSi$_2$ phase. By the formation of CaSi$_2$ phase, 97% of Fe and 66 % of P were removed from Ca added MG-Si with the particle size of 600~850${\mu}m$ by aqua regia(more than 30%) leaching.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.2
• /
• pp.94-98
• /
• 2005

Coptp films with the additive elements (X=Fe, Mn) of varying concentrations were prepared by in-situ electrodeposition, to tailor their magnetic properties. Alloys of CoPtP-X (X=Fe, Mn) were synthesized by changing the solution concentrations of Fe and Mn for electrodeposition. In the electrodeposited CoFePtP alloys, preferred orientation of the electrodeposited films changed from hexagonal (001) to (100) direction with increasing iron contents as revealed by X-ray diffraction, and these films exhibited various magnetic properties ranging from a typical hard magnetic to a soft magnetic property in accordance with microstructural variations. In the case of Mn addition, excellent hard magnetic property was observed at a specific Mn concentration of 0.0126 M in the electrolyte, with the coercivity of 4630 Oe and squareness of 0.856 and this was attributed to the fact that magnetization easy-axis (hexagonal c-axis) coincides with the preferred growth orientation of the film confirmed by transmission electron microscopy.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.04a
• /
• pp.24-25
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.10a
• /
• pp.66-67
• /
• 1998

• Proceedings of the Korean Magnestics Society Conference
• /
• 1995.05a
• /
• pp.70-71
• /
• 1995

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2001.05a
• /
• pp.176-176
• /
• 2001