• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.618-624
• /
• 2007

thermochemical methane reforming consisting of two steps on Cu/Fe/Zr mixed oxide media was carried out using a fixed bed infrared reactor. In the first step, the metal oxide was reduced with methane to produce CO, $H_2$ and the reduced metal oxide in the temperature of 1173 K. In the second step, the reduced metal oxide was re-oxidized with steam to produce $H_2$ and the metal oxide in the temperature of 973 K. The reaction characteristics on the added amounts of Cu in Cu/Fe/Zr mixed oxide media and the cyclic tests were evaluated. With the increase of the added amount of Cu in Cu/Fe/Zr mixed oxide media, the conversion of $CH_4$, the selectivity of $CO_2$ and the $H_2/CO$ molar ratio were increased, while the selectivity of CO was decreased in the first step. On the other hand, the evolved amount of $H_2$ was decreased with increasing the added amount of Cu in the second step. The $Cu_xFe_{3-x}O_4/ZrO_2$ medium added with Cu of x = 0.7 showed good regeneration properties in the 10th cyclic tests indicating that the medium had high durability. In addition, the gasification of the deposited carbon in the water splitting step was promoted with the addition of Cu in the media.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.341-349
• /
• 2002

Electrical, mechanical and sinterability properties of yttria-stabilized zirconia doped with 5.35wt% $Y_2$O$_3$(Y$_2$O$_3$- containing stabilized zirconia : YSZ) were studied as a function of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ addition. The ratio of monoclinic phase to tetragonal phase was changed by the addition of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ to 8.00 wt% and sintered density decreased with increasing $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ addition. Fracture toughness increased with the increase of monoclinic to tetragonal phase ratio and was maximum at about 18%. When transition metals such as CoO, Fe$_2$O$_3$ or MnO$_2$ was added more than 1.5 wt%, the electrical conductivity of YSZ increased. But $Al_2$O$_3$ hardly affected the electrical conductivity of YSZ. The addition of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ into YSZ resulted in the more complex behavior of fracture toughness and hardness variation and the specimen with 1.5wt%-Fe$_2$O$_3$, 3.0wt%-Al$_2$O$_3$ and 1.5wt%-CoO showed the monoclinic to tetragonal phase ratio of 18% and the highest toughness of 10.8 MPa.m$^{1}$2/ and Vickers hardness of 1201 kgf/mm$^2$.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.250-257
• /
• 1997

The microstructure and magnetic properties of Fe-Nb-B-N thin film alloys, which produced by rf magnetron sputtering method in $Ar+N_2$ mixed gas atmosphere, were investigated. The $Fe_{70}Nb_{14}B_{11}N_5$ films, annealed at 59$0^{\circ}C$, exhibit soft magnetic properties: $4{\pi}M_s=16.5kG$ , $H_c=0.13Oe$ and ${\mu}_{eff}$ (1~10 MHz)=5, 000. The frequency stability of the Fe-Nb-B-N films has also been found to be good up to 10 MHz. The Fe-Nb-B-N thin film alloys annealed at 59$0^{\circ}C$ consist of three phase; fine crystalline $\alpha$-Fe phase with grain size of about 5~10 nm, Nb-B rich amorphous phase and Nb-nitride precipitates with the size of less than 3 nm. Annealed Fe-Nb-B films have two phases; $\alpha$-Fe grains with the size of about 10 nm and Nb-B rich amorphous phase. The addition of N decreased $\alpha$-Fe grain size due to the precipitation of NbN. The good magnetic properties of the Fe-Nb-B-N film alloys are due to fine $\alpha$-Fe grains resulting from the precipitation of NbN.

• Electrical & Electronic Materials
• /
• v.10 no.10
• /
• pp.995-999
• /
• 1997

For melt-spun Fe-Nd-C alloy variation of phase development and magnetic properties with the variety of small Al addition was investigated. As the amount of Al addition increased the amorphization of Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe was retarded and the residual Fe$_{14}$/Nd$_{2}$/C or $\alpha$-Fe did not eliminated after heat treatment resulting in poor coercivities of the ribbons. The grain size of Fe$_{14}$/Nd$_{2}$/C increased with the increase of Al addition and the abnormal grain was often found out in the ribbon heat treated for more then 10 min. The enhancement of coercivity was the highest with the addition of 0.5at%Al. As the amount of Al addition increase the coercivities dropped rapidly. The highest coercivity obtained so far is 13.9kOe which about 16% higher than that(11.2kOe) obtained from the Al-free specimen.

• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.269-273
• /
• 2000

Fe-l7Cr-2M(M=Si, Nb, Mo) alloy powder was prepared by plasma electrode rotating atomizer and than the alloy powder was formed and sintered. The particle shape of the Fe-l7Cr-2M(M=Si, Nb, Mo) alloy power is spherical. The saturation magnetization of the sintered Fe-17Cr-2Mo and Fe-l7Cr-2Nb alloy are 155 emu/g. The saturation magnetization of the sintered Fe-l7Cr-2Si alloy is less than that of the sintered Fe-l7Cr-2Mo and Fe-l7Cr-2Nb alloy. The amplitude relative permeability of the sintered Fe-l7Cr-2M(M=Si, Nb, Mo) alloy has the maximum value in the range of 3∼5 Oe applied field at forming pressure 12 ton/cm$^2$, sintering temperature 1200$^{\circ}C$, and frequency 1 kHz. Power loss of the sintered Fe-l7Cr-2Nb alloy is 40 mW/cc at applied field, H$\sub$a/=5 Oe, and frequency, f=1 kHz. The power loss of the sintered Fe-l7Cr-2Nb alloy is a half of that of the sintered Fe-l7Cr-2Si and Fe-l7Cr-2Mo alloy.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.71-76
• /
• 1992

Piezoceramic filters were fabricated by adding $MnO_2 and FeZ0_3$ to the $0.05Pb(Al_{2/3}W_{1/3})O_3-0.95Pb(Zr_{0.52}Ti0.48)O_3$ system using photolithography method. As the amounts of $MnO_2$ increased, the electro-mechanical coupling factor(Kp) decresed. On the other hand, for $Fe_2O_3$ added samples, Kp was 57%, but mechanical quality factor(Qm) showed relatively low value. The passband widths were 155kHz for 0.3wt % $MnO_2$ addition and 260kHz for 0.1 wt % $Fe_2O_3$ addition, and were inversely propotional to Qm values. Group delay time characteristics showed Gausian for $MnO_2$ additions and Butterworth for$Fe_2O_3$ additions.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.34-39
• /
• 2006

Pure and Fe-doped CuO thin-film and powder samples were prepared using a sol-gel method. Undoped CuO films exhibited monoclinic structure and p-type electrical conductivity $(\~10^{-2}\;{\Omega^{-1}\;cm^{-1}$ due to copper deficiency. On the other hand, CuO: Fe films were found to be insulating and Li doping on the films led to a restoration of p-type conductivity and a ferromagnetic hysteresis behaviour at room temperature. The observed properties far the CuO : Fe, Li films can be explained in terms of hole creation by substitution of $Li^+$ for $Cu^{2+}$ sites and mediation of long-range interactions between $Fe^{3+}$ ions by the $Li^+$-induced defect states. CuO: Fe powders exhibited a ferromagnetism at room temperature with its strength being dependent on post-annealing temperature. Mossbauer measurements on the CuO: Fe films and powders revealed that the octahedral $Cu^{2+}$ sites are mostly substituted by $Fe^{3+}$ ions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.2
• /
• pp.245-251
• /
• 1998

A 10-week feeding experiment was conducted to determine the influence of several minerals from dietary mineral premix on growth and body composition in juvenile Korean rockfish. Three replicate groups of fish Initially averaging 4.2 g were fed one of the ten experimental diets. Korean rockfish muscle and casein as protein sources were used in the basal diet, and deleted one of each mineral (P, Ca, Zn, Mg, Fe, K, Mn, Se or all) in the control mineral premix, Weight gain, feed efficiency and nutrient retention in fish fed the diet not containing mineral premix were significantly lower than those in fish fed other diets (P<0.01). Weight gain in fish fed the diets deleted each mineral (P, Ca, Zn, Hg, Fe, K, Mn or Se) was lower than that of control diet (P<0.01), Feed efficiency and protein retention in fish fed the diets deleted each of P, Ca, Zn or Mn were lower than those ot control diet (P<0.01). Daily feed intake and lipid retention were not affected by dietary mineral premixes ( P>0.01). Proximate analysis and mineral contents in the whole body, muscle, liver or bone of fish fed the diets deleted each mineral were not different to control diet ( P>0.01). The data obtained in this study indicate that each of the P, Ca, Zn, Mg, Fe, K, Mn or Se is essential for normal growth of Korean rockfish.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.3
• /
• pp.463-470
• /
• 1996

Ceramic membrane consisting of an ${\alpha}-Al_{2}O_{3}$ support and Fe doped $TiO_{2}$ top layer was prepared by the sol-gel method. The supported Fe doped $TiO_{2}$ top layer was made by dip coating the support in a mixed sol. The microstructure of the composite membranes was studied by SEM after calcination at $550~850^{\circ}C$. After sintering at $650^{\circ}C$ for 1 hr., the average particle diameter of the Fe doped $TiO_{2}$ top layer was ~40 nm. The supported Fe doped $TiO_{2}$ composite membranes exhibited much higher heat resistance than the $TiO_{2}$ membrane. The Fe doped $TiO_{2}$ composite membrane retained a crack-free microstructure and narrow particle size distribution even after calcination up to $650^{\circ}C$.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.88-89
• /
• 2003

Rotifer의 먹이 생물로 이용되는 Chlorella의 대량 배양에는 농업용 비료가 널리 이용되고 있다. 그러나 농업용 비료만을 사용할 경우 f/2배지에 비해 성장이 낮은 단점이 있다. 따라서 본 연구는 농업용 비료 배지에 여러 가지 미량 성분을 첨가하여 그 성장 변화를 측정하고, 고밀도 대량 배양에 필요한 미량 원소 성분을 파악하고자 하였다. 먼저 Chlorella의 대량 배양에 이용되는 농업용 비료 배지(복합, 요소비료)에 실내 배양에 주로 이용되는 f/2배지의 trace element 성분 중 코발트(Co), 구리(Cu), 아연(Zn) 및 몰리브덴(Mo)를 f/2배지의 함량을 기준으로 각각 0.5, 1.0, 1.5 및 2.0배로 첨가하여 $25^{\circ}C$, 5,000 lux 연속조명, 15$\textperthousand$에서 배양한 결과 각 미량 원소의 첨가 함량이 높을수록 Chlorella의 성장은 높게 나타났다. 전체 실험구 중에서 아연 2.0배, 구리 2.0배를 첨가한 비료 배지에서 S.G.R.이 각각 0.3598, 0.3599의 성장을 나타내었으며, 아연과 구리 성분을 첨가한 Chlorella에서 높은 성장률을 보였다. 위의 실험에서 첨가효과가 좋은 Cu와 Zn 2.0배와 철(Fe)과 망간(Mn)을 같은 비율(0.5~2.0배)로, 다시 배양한 결과, Cu 2.0배와 Zn 2.0배는 S.G.R.이 각각 0.6283과 0.6231로 가장 높았으며, Fe 2.0배, Mn 2.0배와 1.5배에서 S.G.R이 각각 0.6210, 0.6200, 0.6183의 높은 성장률을 나타내었다. 위의 실험에서 농업용 비료에 첨가된 모든 trace element 중에서 가장 좋은 성장을 나타낸 구리(Cu) 성분의 정확한 공급 농도를 파악하기 위하여 농업용 비료에 2, 3, 4 및 5배를 첨가하여 $25^{\circ}C$, 5,000 lux, 15$\textperthousand$에서 배양한 결과, S.G.R.이 CU 함량을 3배로 첨가하였을 경우 2716$\times$$10^4$cells/$m\ell$로 가장 높은 세포 밀도를 나타내었다. 또한 5종의 trace element (Fe, Mn, Zn, Cu, Co)를 혼합하여 비료 배지(1.25배)에 첨가하여 미량 원소간의 상호 작용에 대해서 알아 본 결과, Fe와 Mn 두가지 성분만을 농업용 비료 배지에 혼합하였을 경우 세포수가 2720$\times$$10^4$cells/$m\ell$로서 높은 성장을 나타내었다. 다음으로 Fe, Mn, Zn 및 Cu 4종을 모두 혼합하여 첨가한 실험구가 2608$\times$$10^4$ cells/$m\ell$ 높은 세포 밀도를 나타내었다. 이러한 결과로서 옥외에서 농업용 비료배지에 구리(Cu, f/2배지 기준 3.0배)성분을 첨가함으로써 Chlorella의 성장을 효율적으로 향상시킬 수 있을 것으로 판단된다.