• Title/Summary/Keyword: Fe (III) ions

검색결과 95건 처리시간 0.03초

Solid-State Ball-Mill Synthesis of Prussian Blue from Fe(II) and Cyanide Ions and the Influence of Reactants Ratio on the Products at Room Temperature

  • Youngjin Jeon
    • 대한화학회지
    • /
    • 제68권2호
    • /
    • pp.82-86
    • /
    • 2024
  • This paper presents the solid-state synthesis of insoluble Prussian blue (Fe4[Fe(CN)6]3·xH2O, PB) in a ball mill, utilizing the fundamental components of PB. Solid-state synthesis offers several advantages, such as being solvent-free, quantitative, and easily scalable for industrial production. Traditionally, the solid-state synthesis of PB has been limited to the reaction between iron(II/III) ions and hexacyanoferrate(II/III) complex ions, essentially an extension of the solution-based coprecipitation method to solid-state reaction. Taking a bottom-up approach, a reaction is designed where the reactants consist of the basic building blocks of PB: Fe2+ ions and CN- ions. The reaction, with a molar ratio of Fe2+ and CN- corresponding to 1:2.8, yields PB, while a ratio of 1:6.6 results in a mixture of potassium hexacyanoferrate(II) (K4Fe(CN)6), potassium chloride (KCl), and potassium cyanide (KCN). This synthetic approach holds promise for environmentally friendly methods to synthesize multimetallic PB with maximum entropy in nearly quantitative yield.

양이온교환수지에 대한 Co(II), Ni(II), Cr(III), Fe(III) 이온의 흡착 특성 - 원자로 일차 냉각재 계통내 탈염 공정에의 적용 (Adsorption Characteristics of Co(II), Ni(II), Cr(III) and Fe(III) Ions onto Cation Exchange Resin - Application to the Demineralizing Process in a Primary Coolant System of PWR)

  • 강소영;이병태;이종운;문승현;김경웅
    • Journal of Radiation Protection and Research
    • /
    • 제27권1호
    • /
    • pp.27-35
    • /
    • 2002
  • 가압경수로 일차냉각수내 탈염공정의 효과적 운용을 위하여 Amberlite IRN-77 양이온 교환수지의 특성 및 Co(II), Ni(II), Cr(III), Fe(III) 이온의 흡착거동을 연구하였다. 용존 금속이온 농도가 약 $200\;mgL^{-1}$인 용액 100 mL에 대하여 이온교환수지 투입량은 약 0.6 g이 가장 적절하였으며, 이온교환 반응 속도 측정 결과 대부분의 흡착은 반응 1 시간 이내에 신속히 발생하였다. 수지에서의 양이온 교환은 Langmuir 흡착등온선을 잘 따르는 것으로 나타났으나, Fe(III)의 경우, 다른 금속과는 달리 쉽게 평형에 이르지 못하였으며 이는 공기와 오래 접촉한 결과 철산화물 또는 수산화물을 형성하며 용액 중으로부터 침전되기 때문인 것으로 관찰되었다. 전자가가 동일한 Co(II)와 Ni(II)가 동시에 포함된 모의 조제용액에 대하여 흡착실험을 한 결과, 각 이온은 거의 동일한 흡착거동을 보였다. 그러나 전자가가 큰 Cr(III)이 첨가된 경우, 이들은 기존에 수지에 흡착되어 있던 전자가가 낮은 금속들을 탈착시키고 대신 흡착하는 경향을 보였다. 따라서 이온교환수지를 이용한 효과적인 탈염 공정을 위해서는 용존 금속 상호간의 경쟁적 흡착관계의 규명이 필요한 것으로 여겨진다.

Xylenol Orange가 결합된 양이온 교환체에 의한 금속이온의 농축 및 Fe(III)의 분리 (Separation of Fe(III) and Concentration of Metal Ions Using Cation Exchange Resin Bonded with Xylenol Orange)

  • 박찬일;김현수;차기원
    • 대한화학회지
    • /
    • 제43권6호
    • /
    • pp.651-655
    • /
    • 1999
  • 뱃치법을 이용하여 음이온 교환수지(Amberlite IRA 400, $Cl^-$형)에 Xylenol Orange를 결합시킨 수지를 얻었다. 이 수지는 0.1 M 정도의 무기산에서 안정하였으며, Xylenol Orange가 결합된 Amberlite lRA-400 수지의 금속 이온들에 대한 흡착능을 측정해 본 결과, Fe(lll) 이온의 흡착력이 다른 이온에 비해 컸다. 따라서 Fe(III) 이온을 예비 농축할 수 있었으며 다른 이온으로 부터 분리하는데는 용리액으로 0.1 M sulfosalicylic acid 용액이 사용되었다.

  • PDF

N,N'-bis(4-methoxysalicylidene) phenylendiamine를 이용한 Fe(II) 및 Fe(III) 이온의 분광학적 분석 (Spectrophotometric Quantitatification of Fe(II) and Fe(III) Ions Using N,N'-bis(4-methoxysalicylidene) phenylendiamine)

  • 김선덕;설종민
    • 대한화학회지
    • /
    • 제55권3호
    • /
    • pp.463-471
    • /
    • 2011
  • [ $N_2O_2$ ] 시프염기 리간드인 N,N'-bis(4-methoxysalicylidene) phenylendiamine(4-$CH_3O$-salphen)을 합성하였다. 분광광도법으로 4-$CH_3O$-salphen을 이용하여 수용액 중의 Fe(II)와 Fe(III)이온의 분리 정량실험을 위하여, 리간드 농도는 $4.0{\times}10^{-4}\;M$, DMF 용매와 물의 비율은 70/30(v/v), pH는 3.4~3.8 범위, 온도는 $55^{\circ}C$에서 1 시간 정도를 물 중탕하여 결과를 얻었다. 시료의 예비 산화 및 환원 전처리는 $5.0{\times}10^{-4}\;M$ 농도의 $H_2O_2$$NH_2OH{\cdot}HCl$을 사용하여 단일 원자가 상태의 시료를 만들어 사용하였다. 이때 Fe(II)와 Fe(III) 이온의 정량은 434 nm와 456 nm에서 흡광도를 측정하였다. 이상의 최적화된 실험조건을 이용하여 약수, 온천수, 바닷물 및 하수 처리장의 처리수를 채취하여 Fe(II)와 Fe(III) 이온을 각각 정량 분석한 결과는 측정 평균값이 표준 값에 대하여 2.00~6.90% 범위에서 잘 일치 하였고, 정량검출한계는 Fe(II)의 경우 27.9 ng/mL이었고, Fe(III)은 55.8 ng/mL이었다.

OenNen-Styrene DVB 합성수지에 의한 U(VI), Fe(II), Sm(III) 이온들의 흡착 (Adsorption of U(VI), Fe(II), Sm(III) Ions on OenNen-Styrene DVB Synthetic Resin)

  • 이치영;김준태
    • 환경위생공학
    • /
    • 제22권3호
    • /
    • pp.77-87
    • /
    • 2007
  • The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 3%, and 5%-crosslinking and macro cyclic ligand of OenNen-$H_4$ by copolymerization method and the adsorption characteristics of uranium(VI), iron(II) and samarium(III) metallic ions have been investigated in various experimental conditions. The synthesis of these resins was confirmed by content of chlorine, element analysis, and IR-spectrum. The effects of pH, time, dielectric constant of solvent and crosslink on adsorption of metallic ions were investigated. The uranium ion was showed fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order uranium ${UO_2}^{2+}>Fe^{2+}>Sm^{3+}$ ion. The adsorption was in order of 1%, 3%, and 5% crosslink resin and adsorption of resin decreased in proportion to order of dielectric constant of solvent.

Studies on Solvent Extraction Using Salphen for Separative Determination of Trace Fe(II) and Fe(III) in Water Samples

  • Kim, Eun-Jook;Kim, Young-Sang;Choi, Jong-Moon
    • Bulletin of the Korean Chemical Society
    • /
    • 제29권1호
    • /
    • pp.99-103
    • /
    • 2008
  • Solvent extraction using salphen as a ligand has been investigated for the selective separation and determination of trace Fe(II) and Fe(III). A salphen ligand was synthesized, and solvent extraction variables, such as solution pH, the concentration of salphen, the type of organic solvent, auxiliary agents, oxidants and the effect of interference were optimized. Salphen is stable at pH 3-4, and Fe(III)-salphen complexes can be selectively extracted into an MIBK(4-methyl-2-pentanone) phase from an aqueous solution within this pH range. For the determination of the total amount of iron in 100 mL of aqueous solution, Fe(II) ions were completely oxidized using 0.05 mL of 3.5% H2O2 without side reactions. To evaluate its applicability, the proposed method was applied to determine trace Fe(II) and Fe(III) in several kinds of water samples. Reproducible results were obtained with RSD of less than 3.0%, and the recoveries for this reliability were obtained with 91-112%.

液狀이온交換體에 依한 蒼鉛中 不純物의 分離定量 (The Separation of the Impurities in Bismuth Metal by Liquid Ion Exchangers and Colorimetric Determination)

  • 박면용;노성린
    • 대한화학회지
    • /
    • 제12권4호
    • /
    • pp.139-141
    • /
    • 1968
  • 液狀이온交換體 Amberite LAI을 chloroform에 10%로 묽혀서 鹽酸算性에서 Bi(III), As(III), Sb(III), Zn(II) 및 Fe(III)의 推出率을 試驗한 結果, Zn(II)는 2M에서 98%. As(III)는 7~14M에서 Sb(III)는 2~4M에서 , Fe(III)는 6~10M에서 蒼鉛과 定量的으로 分離되었다. 그리고 chloroform을 溶媒로 썼을 때는 xylene이나 hexane을 溶媒로 썼을때보다 더 急傾斜를 이루는 推出率曲線을 나타냈다. 各各의 不純物을 分離後 Zn(II)는 dithizone. As(III)는 Gutzeit method, Sb(III)는 brilliant green, Fe(III)는 thiocyanate에 依한 比色方法으로 定量하였다.

  • PDF

Metal Sequestering by a Poly(ethylenimine)-Sephadex G-25 Conjugate Containing 2,2'-Dihydroxyazobenzene

  • 관원종;유창은;장원석;노영석;서정훈
    • Bulletin of the Korean Chemical Society
    • /
    • 제21권4호
    • /
    • pp.393-400
    • /
    • 2000
  • 2,2¢-Dihydroxyazobenzene (DHAB) was attached to poly(ethylenimine) (PEI) to obtain DHAB-PEI. Spectral titration revealed that uranyl, Fe(III), Cu(II), and Zn(II) ion form 1 : 1-type complexes with DHAB attached to PEI. Formation constants for the metal complexes formed by the DHAB moieties of DHAB-PEI were mea-sured by using various competing ligands. The results indicated thatthe concentrations of uranyl, Fe(III), and Cu(II) ions can be reduced to 10 -16 -10 -23 M at p 8 with DHAB-PEI when the concentration of the DHAB moiety is 1 residue M. By using cyanuric chloride as the coupling reagent, DHAB-PEI was immobilized on Sephadex G-25 resin to obtain DHAB-PEI-Seph. Binding of uranyl,Fe(III), Cu(II), and Zn(II) ion by DHAB-PEI-Seph was characterized by using competing ligands. A new method has been developed for characteriza-tion of metal sequestering ability of a chelating resin. Formation constants and metal-binding capacity of two sets of binding sites on the resin were estimated for each metal ion. DHAB-PI-Seph was applied to recovery of metals such as uranium,Fe, Cu, Zn, Pb, V, Mn, and W from seawater. The uranium recovery from seawaterby DHAB-PEI-Seph does not meet the criterion for economical feasibility partlydue to interference by Fe and Zn ions. The seawater used in the experiment was contaminated by Fe and Zn and, therefore, the efficiency of uranium extractionfrom seawater with DHAB-PEI-Seph could be improved if the experiment is carried out in a cleaner sea.