• Title/Summary/Keyword: Fe (III)

Search Result 570, Processing Time 0.028 seconds

Studies on Phytotoxin in Intensively Cultivated Upland Soil III. The Abilities of Siderophore Formation, Competition and Absorption of Fe3+ and Mn2+ with Inoculation of the Fluorescence Forming Soil Bacteria and Soil Saprophytic Fungi (연작장해지토양(連作障害地土壤)의 식물독소(植物毒素)에 관(關)한 연구(硏究) 제(第)3보(報) Siderophore 생성(生成) Pseudomonas 속(屬) 세균접종(細菌接種) 및 양(陽) ion 첨가(添加)가 토양부생균(土壤腐生菌)의 생육(生育)에 미치는 영향(影響))

  • Lee, Sang-Kyu;Suh, Jang-Sun
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.21 no.1
    • /
    • pp.41-47
    • /
    • 1988
  • A laboratory experiment was conducted to find out the abilities of siderophore formation and competition of $Fe^{3+}$ and $Mn^{2+}$ absorption in synthetic medium with inoculation of fluorescence forming pseudomonas and soil saprophytic fungi as Stachybotrys chatarum, Fusarium solani, and F. oxysporum. The results obtained were summarized as follows; 1. The concentration of siderophore in synthetic medium with inoculation of Pseudomonas putida pt-II was increased (with progress of incubation time). 2. The negative correlation was obtained with the increase of $Fe^{3+}$ ion concentration and siderophore in synthetic medium with inoculation of fluorescence forming pseudomonas and soil saprophytic fungi. 3. The fresh weight of fungal hyphae was decreased with the increase of siderophore in synthetic medium. 4. There was insignificant relationship between the concentration of $Mn^{2+}$ and the concentration of siderophore while the positive correlation was obtained with the increase of fresh weight of fungal hyphae.

  • PDF

Treatment of high hexavalent chromium plating wastewater (고농도 6가 크롬 도금 폐수 처리)

  • Kang, Chang Duk;Sim, Sang Jun;Hwang, Suk Hoon
    • Clean Technology
    • /
    • v.7 no.1
    • /
    • pp.75-80
    • /
    • 2001
  • In this study, hexavalent chromium (Cr(VI)) plating wastewater in strong acidic condition was treated by reduction and alkalization. Ferrous sulfate ($FeSO_4$), known to reduce Cr(VI) to Cr(III) rapidly at acidic pH, was used as a reductant of Cr(VI). The optimum reduction condition of Cr(VI) was observed at iron to chromium dose ratio of 3:1 by mole concentration. The precipitation of Cr(III) as $Cr(OH)_3$, was achieved by the pH adjustment in the limestone aeration bed. The precipitates were removed less than the upper limit of chromium for effluent at pH over 5.0. The continuous removal of Cr(VI) was performed using the process consisting of reduction vessel, limestone aeration bed, and sedimentation tank coupled with metal screen membrane. As pH was maintained around 5.0 in the limestone aeration bed, insoluble chromic hydroxide flocs was formed continuously. Most chromic hydroxide flocs were filtered by the metal screen membrane with 1450 mesh size, and the treated water to meet the upper limits of chromium for effluent (Cr Conc. 0.25~0.90 mg/l) was obtained in 30 minutes. Periodic backwashing decreased the fouling on the membrane rapidly.

  • PDF

Determination of Trace Mo(VI) in Seawater Samples by Ion Pair Formation and Solvent Extraction (이온쌍 형성-용매추출에 의한 해수 중 극미량 Mo(VI)의 정량)

  • Kim, Young-Sang;Nho, Seung-Gu;Choi, Jong-Moon
    • Analytical Science and Technology
    • /
    • v.6 no.3
    • /
    • pp.329-334
    • /
    • 1993
  • The formation of Mo(VI)-alizarin red S chelate ion its extraction into an organic solvent by ion-pairing for the separarive determination of trace Mo(VI) in natural water was applied in seawater samples. Removed Fe(III) and Zn(II), and Cu(II) by precipitating with anthranilic acid at pH 4.0 and 2.0, seawater 100mL was sampled in 250mL separatory funnel. After Mo(VI)-ARS chelate ion was formed by adding 0.01M alizarin red S solution 1.0mL to the water sample of pH 4.6, 0.6% aliquat-336 chloroform solution 10mL was added and the solution was vigorously shaked for about 30 seconds to form the ion-pair between Mo(VI)-ARS and aliquat-336 perfectly. The solution was stood for about 30 minutes. And the organic phase was taken for the absorbance measurement of the ion-pair at 520nm. The content of Mo(VI) was obtained from the standard calibration curve. Several extraction conditions such as pH, adding amounts of alizarin red S and aliquat-336, and shaking and standing times were optimized and the interferences and release of concomitant ions was also studied. This procedure was applied to the analysis of Eastern and Yellow seawaters. It could be confirmed from the recoveries of over 85% in samples spiked with a given amount of Mo(VI) that this method was also quantitative in the determination of trace Mo(VI) in a seawater.

  • PDF

Changes in approximate composition, antioxidant activity and melatonin content of rapeseed during germination (발아기간에 따른 유채종자의 일반성분 조성, 항산화능 및 멜라토닌 함량의 변화)

  • Kim, Seok Joong
    • Food Science and Preservation
    • /
    • v.23 no.6
    • /
    • pp.839-847
    • /
    • 2016
  • The changes of approximate composition, antioxidant activity and melatonin content in rapeseed were monitored during 10 days germination to choose the optimum sprouts with beneficial functionalities. The moisture content of seeds increased from 3.23% to 17.50% during 10 days germination period, while ash content was similar (4.03~4.91%). The fat content was reduced from 38.18% to 22.65%, however, protein content increased from 21.43% to 26.72%. The carbohydrate content increased from 32.71% to 35.84% at 8th day. The reducing sugar and fiber contents reached 10.47% and 15.12% at 6th day from 4.04% and 12.82%, respectively. Eighth day sprouts contained highest level of polyphenol (gallic acid equivalent, 19.2 g/kg). Germination increased antioxidant activities (trolox equivalent, mmol/kg) of seeds with slight difference depending on assay. That is, antioxidant activity was highest at 6th day in DPPH radical scavenging (55.9), 10th day both in ABTS radical scavenging (71.6) and Fe(III) reducing (125.3), and 4th day in peroxy radical scavenging (116.7) assay. Melatonin content of seeds ($0.85{\mu}g/kg$) also increased and reached up to $14.93{\mu}g/kg$ at 6th day. In conclusion, germination more than 4 days raised antioxidant activity of seeds highly, and 6th day sprouts had additional benefit in terms of melatonin, reducing sugar and crude fiber contents.

Synthesis, Potentiometric, Spectral Characterization and Microbial Studies of Transition Metal Complexes with Tridentate Ligand (세자리 리간드의 전이금속 착물에 대한 합성과 전위차 및 분광학적 확인 그리고 미생물학적 연구)

  • Jadhav, S.M.;Munde, A.S.;Shankarwar, S.G.;Patharkar, V.R.;Shelke, V.A.;Chondhekar, T.K.
    • Journal of the Korean Chemical Society
    • /
    • v.54 no.5
    • /
    • pp.515-522
    • /
    • 2010
  • A relation between antimicrobial activities and the formation constants of solid complexes of Cu(II), Ni(II), Co(II), Mn(II) and Fe(III) with tridentate Schiff base ligand, 4-hydroxy-3(1-{2-(benzylideneamino)-phenylimino}-ethyl)-6-methyl-2Hpyran-2-one (HL) derived from o-phenylene diamines, dehydroacetic acid (DHA) and p-chloro benzaldehyde have been studied. The ligand and metal complexes were characterized by elemental analysis, conductivity, magnetic susceptibility, thermal analysis, X-ray diffraction, IR, $^1H$-NMR, UV-vis and mass spectra. From the analytical data, the stiochiometry of the complexes was found to be 1:2 (metal:ligand) with octahedral geometry. The molar conductance values suggest the nonelectrolytic nature of metal complexes. The X-ray diffraction data suggests monoclinic crystal system for Ni(II) and orthorhombic crystal system for Cu(II) and Co(II) complexes. The IR spectral data suggest that the ligand behaves as tridentate ligand with ONN donor atoms sequence towards central metal ion. Thermal behavior (TG/DTA) and kinetic parameters calculated by Coats-Redfern method suggests more ordered activated state in complex formation. The protonation constants of the complexes were determined potentiometrically in THF:water (60:40) medium at $25^{\circ}C$ and ionic strength ${\mu}=0.1\;M$ ($NaClO_4$). Antibacterial activities in vitro were performed against Staphylococcus aureu and Escherichia coli. Antifungal activities were studied against Aspergillus Niger and Trichoderma. The effect of the metal ions and stabilities of complexes on antimicrobial activities are discussed.

Geochemical Environments of Copper-bearing Ore Mineralization in the Haman Mineralized Area (함안지역 함 동 광화작용의 지화학적 환경)

  • Choi, Sang-Hoon
    • Economic and Environmental Geology
    • /
    • v.42 no.1
    • /
    • pp.1-8
    • /
    • 2009
  • The Haman mineralized area is located within the Cretaceous Gyeongsang Basin along the southeastern part of the Korean peninsula. Almost all occurrences in the Haman area are representative of copper-bearing polymetallic hydrothermal vein-type mineralization. Within the area are a number of fissure-filling hydrothermal veins which contain tourmaline, quartz and carbonates with Fe-oxide, base-metal sulfide and sulfosalt minerals. The Gunbuk, Jeilgunbuk and Haman mines are each located on such veins. The ore and gangue mineral paragenesis can be divided into three distinct stages: Stage I, tourmaline + quartz + Fe-Cu ore mineralization; Stage II, quartz + sulfides + sulfosalts + carbonates; Stage III, barren calcite. Equilibrium thermodynamic data combined with mineral paragenesis indicate that copper minerals precipitated mainly within a temperature range of $350^{\circ}C$ to $250^{\circ}C$. During early mineralization at $350^{\circ}C$, significant amounts of copper ($10^3$ to $10^2\;ppm$) could be dissolved in weakly acid NaCl solutions. For late mineralization at $250^{\circ}C$, about $10^0$ to $10^{-1}\;ppm$ copper could be dissolved. Equilibrium thermodynamic interpretation indicates that the copper in the Haman-Gunbuk systems could have been transported as a chloride complex and the copper precipitation occurred as a result of cooling accompanied by changes in the geochemical environments ($fs_2$, $fo_2$, pH, etc.) resulting in decrease of solubility of copper chloride complexes.

Synergistic Solvent Extraction of Manganese(II) by using Cupferron and Tetrabutylammonium ion (Cupferron과 Tetrabutylammonium ion을 이용한 Mn(II)의 상승용매 추출에 관한 연구)

  • In, Gyo;So, Jin-Hwan;Choi, Jong-Moon;Kim, Young-Sang
    • Analytical Science and Technology
    • /
    • v.17 no.1
    • /
    • pp.1-7
    • /
    • 2004
  • The synergistic solvent extraction of Mn(II) by N-nitroso-N-phenylhydroxylamineammonium salt (cupferron) and tetrabutylammonium ion ($TBA^+$) has been studied. In the presence of $TBA^+$, over 95% Mn(II) was extracted from an aqueous solution into chloroform by the cupferron in the pH range of 4 to 10. But a part of Mn(II) was extracted with only cupferron. The ternary complex of Mn(II) was more efficiently extracted into $CH_2Cl_2$ and $CHCl_3$ than other nonpolar solvents. The extracted Mn(II) was determined in the back-extracted $HNO_3$ solution by GF-AAS. This fixed procedure was applied to the determination of trace Mn(II) in tap water samples of pH 5.0. The detection limit equivalent to 3 times standard deviation of the background absorption was 0.37 ng/mL and Mn(II) was determined with the range of 0.4 to 1.01 ng/mL in our laboratory's tap water. And the recovery was 94 to 107% in samples in which 2.0 ng/mL Mn(II) was spiked. The interferences of common concomitant elements such as Cu(II), Ca(II), Fe(III) and so on were not shown up to $10{\sim}20{\mu}g/mL$. From these results, this procedure could be concluded to be applied for the determination of trace Mn(II) in other environmental water samples.

Precipitation-Filtering Method for Reuse of Uranium Electrokinetic Leachate (우라늄 오염 동전기 침출액의 재이용을 위한 침전-여과 방법)

  • Kim, Gye-Nam;Shon, Dong-Bin;Park, Hye-Min;Kim, Ki-Hong;Lee, Ki-Won;Moon, Jeik-kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.9 no.2
    • /
    • pp.63-71
    • /
    • 2011
  • A large volume of uranium electrokinetic leachate has been generated during the electrokinetic decontamination to remove uranium from contaminated soil. The treatment technology for the reuse of the uranium leachate was developed. The concentration of uranium in the generated uranium leachate was 180 ppm and concentrations of Mg(II), K(I), Fe(II), and Al(III) ions ranged from 20 ppm to 1,210 ppm. The treatment process for uranium leachate consisted mainly of mixing and cohesion, precipitation, concentration, and filtration. In order to obtain the pH=11 of a precipitate solution, the calcium hydroxide needs to be 3.0g/100ml and the sodium hydroxide needed to be 2.7g/100ml. The results of several precipitation experiments showed that a mixture of NaOH+0.2g alum+0.15g magnetite was an optimal precipitant for filtration. The average particle size of precipitate with NaOH+alum+0.15g magnetite was $600\;{\mu}m$. Because the total value of metal concentrations in supernatant at pH=9 was the smallest, sodium hydroxide should be added with 0.2g alum and 0.15g magnetite for pH=9 of leachate.

Natural Dyeing of Fabrics with Guava (Psidium guajava L.) Leaf Extract III - Dyeability and Functional Property of Hanji Cotton Fabrics - (구아바 잎 추출액을 이용한 직물의 천연염색 III - 한지면직물의 염색성과 기능성 -)

  • Han, Mi Ran;Lee, Jeong Sook
    • Fashion & Textile Research Journal
    • /
    • v.14 no.5
    • /
    • pp.866-877
    • /
    • 2012
  • The natural dyeing of hanji cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics in pre-mordanting. The dyeing equilibrium was shown at the fourth time of repeated dyeing. In the processing of hanji cotton fabrics, K/S value was high when hanji cotton fabric was treated with soybean milk at $90^{\circ}C$. Similar K/S value of dyeing was shown when fabrics were processed with chitosan, regardless of dyeing temperature. High K/S value of dyeing was seen when fabrics processed with gallnut tannin at 40. Fabrics dyed with acidic water extract showed yellowish color. Fabrics dyed with alkaline water extract showed reddish color, and fabrics dyed with ethanol extract showed greenish yellow color. In case of Sn-mordanted fabrics, the washing fastness level was between 3 to 4, and other dyed fabrics showed low fastness. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness of the fabrics was better in dry rubbing than in wet rubbing. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. Hanji cotton fabric maintained certain deodorization in the state of raw fabric. All dyed fabrics showed higher UV protection rate than control fabric.

STUDY OF M82 USING SPECTRA FROM THE INFRARED SPACE OBSERVATORY

  • SOHN JUNGJOO;ANN H. B.;PAK SOOJONG;LEE H. M.
    • Journal of The Korean Astronomical Society
    • /
    • v.34 no.1
    • /
    • pp.17-24
    • /
    • 2001
  • We have studied the central parts of M82, which is a well-known infrared luminous, starburst galaxy, by analyzing archival data from the Infrared Space Observatory (ISO). M82 was observed at 11 positions covering $\pm$45" from the center along the major axis. We analyzed 4 emission lines, [ArIII] 8.99 ${\mu}m$, $H_2$ 17.034 ${\mu}m$, [FeII] 25,98 ${\mu}m$, and [SiII] 34,815 ${\mu}m$ from $SWSO_2$ data. The integrated flux distributions of these lines are quite different. The $H_2$ line shows symmetric twin peaks at $\~$18" from the center, which is a general characteristic of molecular lines in starburst or barred galaxies. This line appears to be associated with the rotating molecular ring at around $\~$200 pc just outside the inner spiral arm. The relative depletion of the $H_2$ line at the center may be due to the active star formation activity which dissociates the $H_2$ molecules. The other lines have peaks at the center and the distributions are nearly symmetric. The line profiles are deconvolved assuming that both intrinsic and instrumental profiles are Gaussian. The velocity dispersion outside the core is found to be $\~50 km s^{-1}$. The central velocity dispersion is much higher than $50 km s^{-1}$, and different lines give different values. The large central velocity dispersion ($\sigma$) is mostly due to the rotation, but there is also evidence for a high $\sigma$ for [ArIII] line. We also generated position-velocity maps for these four lines. We found very diverse features from these maps.

  • PDF