• Journal of the Korean Chemical Society
• /
• v.38 no.8
• /
• pp.598-602
• /
• 1994

Light-induced electron transfer reaction within binuclear complex $(NC)_5FeII-L-CoIII(NH_3)_5$ was studied with steady-state photolysis and the rate constants were measured for various bridging lignands. klight and quantum yields for BP, PHEN, DAP having conjugation between metal binding sites were about $3{\times}10^{-2} sec^{-1}$ and 1, and for BPEA having no conjugation were about $2{\times}10^{-4} sec^{-1}$ and 0.03. Light-induced electron transfer reaction within binuclear complex was proved to be the chemical mechanism which had charge transfer excited state MLCT*.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.84-89
• /
• 2012

Attempts were made to develop a stable gray pigment at reducing atmosphere, substituting Ti in $ZrTiO_4$ with Mn, Fe, Co and Cu The pigment synthesized at $1300~1500^{\circ}C$ by solid state method with the composition of $ZrTi_{1-x-y}A_xB_yO_4$ (x = y = 0.005, 0.015, 0.035, 0.055, 0.075, 0.095, 0.115, 0.135, 0.155, 0.175 and 0.195 mole, A = Mn(III), Fe(III), Co(II, III) and Cu(II) (chromophores), B = Sb (counterion). The pigments were fired at $1400^{\circ}C$ for 3 h with substitute amount changes of Mn, Fe, Co and Cu to $ZrTiO_4$ crystals, and analyzed by Raman spectroscopy to figure out substitute limits. Results indicated 0.035 mole for Mn, 0.115 mole for Fe, 0.015 mole for Co and 0.015 mole for Cu as substitute limits, respectively. Figs. 1, 2, 3, and 4 represent each substitute pigments of Mn, Fe, Co and Cu. Synthesized pigment was applied to a lime and a lime-magnesia glaze at 7 wt% each, and fired at reducing atmosphere of $1240^{\circ}C$, soaking time 1h. Gray color was obtained with CIE-$L^*a^*b^*$ values at 44.55, -0.65, 1.19(Mn), 40.36, -0.90, 0.30(Fe), 42.63, -0.03, -1.49(Cu) and -40.79, -0.28, -0.91(Co), respectively.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1738-1746
• /
• 2024

The effect of europium-driven corrosion behavior of Alloy 709 in FLiNaK molten salt was investigated by static immersion tests at 700 ℃. It was found that the corrosion of Alloy 709 increased after the addition of EuF₃, even though the standard reduction potential of Eu(III)/Eu(II) was negative than those of Fe(II)/Fe, Ni(II)/Ni and Cr (II)/Cr. The presence of Eu(III) led to deeper corrosion attack layers and more pits on the steel surface in comparison with corrosion in blank FLiNaK. However, the addition of Eu(III) seemed to have a role in reducing surface cracking that was explored in corrosion by blank FLiNaK, which depended on Eu(III) concentration.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2008

Fe-impregnated activated carbon(Fe-AC) was prepared by Fe(III) loading on activated carbon(AC) in various preparation pH. In order to evaluate the stability of Fe-AC, dissolution of iron from Fe-AC in acidic conditions was measured. In addition, batch experiments were conducted to monitor the removal efficiency of copper by Fe-AC. Results of stability test for Fe-AC showed that the amount of extracted iron increased with contact time but decreased with increasing solution pH. The dissolved amount of iron gradually increased at solution pH 2 and finally 13% of the total iron loaded on activated carbon was extracted after 12 hr. However dissolution of iron was negligible over solution pH 3. Removal of Cu(II) by Fe-AC was greatly affected by solution pH and was decreased as solution pH increased as well as initial Cu(II) concentration decreased. Surface complexation modeling was performed by considering inner-sphere complexation reaction and using the diffuse layer model with MINTEQA2 program.

• Corrosion Science and Technology
• /
• v.4 no.2
• /
• pp.45-50
• /
• 2005

A 3% NaCl solution of 1 $dm^3$ circulated with 1.5 $dm^3/min$ by a pump for 24 h in the presence of magnetic field. An iron plate immersed in a $100cm^3$ of test solution for 24 h. The rest potential and pH on surface fixed after 3 h. Containing 0~120 ppm of Fe(II) ion, the dissolution in the magnetically treated solution rose comparing with that in the non-magnetically treated solution. The dissolution amount reached to maximum at 50 ppm, then fixed in the non-magnetically treated solution. When Fe(II) ion existed in the magnetically treated solution, dissolution accelerated a little. In the non-magnetic treated solution containing 10~125 ppm of Fe(III) ion existed, the dissolution accelerated. The dissolution amounts reached to maximum at 50 ppm, then decreased from maximum value. In the magnetically treated solution, the dissolution amounts reached to minimum until 50 ppm, then increased from minimum value. The dissolution amounts affected larger with increasing of magnetic flux density. Fe(II), Fe(III) ions and magnetic treatment affected to formation of $Fe(OH)_2$ and/or $Fe_3O_4$ films. The magnetically treated effects memorized about one month.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.73-78
• /
• 2016

The oxidation states of structural Fe in clay minerals often reflect the paleo-redox conditions of the depositional environments. It is inevitable to utilize the high resolution of transmission electron microscopy (TEM) to investigate the mechanism of mineral transformation at nano-scale. The applications of TEM- electron energy loss spectroscopy (EELS) for quantification of $Fe(III)/{\Sigma}Fe$ from the K-nontronite formation associated with structural Fe(III) reduction in nontronite under deep subseafloor environment were demonstrated. In particular, quantification of the changes in Fe-oxidation state at nanoscale is essential to understand the mechanisms of minerals formation. The procedure of EELS acquisition, quantitative determination of Fe-oxidation states, and advantages of EELS techniques were discussed.

• Journal of the Korean Ceramic Society
• /
• v.16 no.2
• /
• pp.89-98
• /
• 1979

In order to prepare ferroxplana ZnY $(Ba_2Zn_2Fe_{12}O_{22})$, which would be useful for GHz-band communication, the optimum coprecipitation condition of 1 $BaCl_{2-1} Zn(NO_3)_2-6FeCl_3$ in $NaOH-Na_2CO_3$ solution was investigated by use of a new apparatus invented in our laboratory. By freeze-drying and calcining the coprecitated hydroxide-carbonate, the very reactive powder was obtained, from which the synthesis process of ZnY and the other related crystals were investigated by means of X-ray diffraction. In results, it was found that the reactive powder containing ZnY as the major component can be prepared by this method, which may be used in manufacturing the various magnetic cores for the microwave communication.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.9-14
• /
• 2000

Glass transition temperature (T/sub g/) is proportional to the quadrupole splitting(Δ) of Fe(III) obtained from the /sup 57/Fe Mossbauer spectra (T/sub g/-Δ rule (1990)). The values of Δ reflect the distortion of Fe(III) atoms, which occupy the sites of network-forming atoms. Heat treatment of potassium vanadate and calcium gallate glasses at around the individual T/sub g/ causes a structural relaxation, accompanying a linear decrease of T/sub g/ and Δ values. These experimental results prove that T/sub g/ decreases with a decrease in the distortion of VO₄, GaO₄, and FeO₄tetrahedra, as the T/sub g/-Δ rule predicted.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5365-5369
• /
• 2011

Silica-gold composite particles were prepared by wet chemical route including impregnation method. The effect of precursor and solvent on the preparation of silica-gold particles was investigated. When spherical silica particles and PVP and hydrogentetrachloroaurate(III) hydrate aqueous solution were used as support material and precursor solution, silica-gold composite particles with light pink color successfully obtained. Obtained composite particles were characterized using FE-SEM, FE-TEM and XRD.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.6
• /
• pp.567-570
• /
• 2000

Bovine liver catalase was exposed to cysteine, as a natural inactivator metabolize, causing autoxidation-generating $H_2O_2$ continuously. The catalase species concentrations and activity measurement were done by spectrophotometry in phosphate buffer 10mM, pH 6.5, and 27 $^{\circ}C$. The activity of catalase decreased continuously due to the conversion of active ferricatalase species, E-Fe (III), to an inactive enzyme species, E-Fe (IV). This conversion is related to the slow production of $H_2O_2generated$ by autoxidation of cysteine. The free SH-group of cysteine has an essential role in production of $H_2O_2$ and hence inactivation of catalase. NADPH can protect catalase against inactivation due to the conversion of inactive form of E-Fe (IV) to ferricatalase species, E-Fe (III).