• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.474-483
• /
• 2019

In this study, iron (Fe) impregnated granular activated carbon (Fe-GAC) has been synthesized and characterized for various properties. Comparative studies have been performed for use of Fe-GAC as an adsorbent as well as a catalyst during catalytic oxidation of hydroquinone (HQ). In the batch adsorption study, effect of process parameter like initial HQ concentration ($C_o=25-1,000mg/L$), pH (2-10), contact time (t: 0-24 h), temperature (T: $15-45^{\circ}C$) and adsorbent dose (w: 5-50 g/L) have been studied. Maximum HQ adsorption efficiency of 75% was obtained at optimum parametric condition of: pH = 4, w = 40 g/L and t = 14 h. Pseudo-second order model best-fitted the HQ adsorption kinetics whereas Langmuir model best-represented the isothermal equilibrium behavior. During oxidation studies, effect of various process parameters like initial HQ concentration ($C_o:20-100mg/L$), pH (4-8), oxidant dose ($C_{H2O2}:0.4-1.6mL/L$) and catalyst dose (m: 0.5-1.5 g/L) have been optimized using Taguchi experimental design matrix. Maximum HQ removal efficiency of 83.56% was obtained at optimum condition of $C_o=100mg/L$, pH = 6, $C_{H2O2}=0.4mL/L,$ and m = 1 g/L. Overall use of Fe-GAC during catalytic oxidation seems to be a better as compared to its use an adsorbent for treatment of HQ bearing wastewater.

• 공업화학
• /
• 제29권4호
• /
• pp.461-467
• /
• 2018

본 연구에서는 $(n-BuCp)_2ZrCl_2$를 $SiO_2/MgCl_2$ 이원 지지체에 담지시켰다. 촉매를 담지하기 전, $SiO_2/MgCl_2$ 이원 지지체를 3종의 알킬알루미늄 화합물, 트리메틸알루미늄, 트리에틸알루미늄 또는 에틸알루미늄 세스퀴클로라이드로 표면처리 하였다. 합성된 표면 처리된 $SiO_2/MgCl_2$에 담지된 메탈로센 촉매로 에틸렌 및 1-헥센의 공중합을 하였다. 촉매 특성 및 성능을 BET, XPS 분석, ICP-AES 분석 및 FE-SEM을 통해 비교 분석하였다. 생성된 공중합체를 DSC 분석, GPC 분석, 13C-NMR 분석 및 FE-SEM을 통해 비교 분석하였다. 합성된 $SiO_2/MgCl_2$ 담지된 메탈로센 촉매의 분석은 이들 촉매의 Zr 함량이 $SiO_2$에 담지된 촉매에 비해 상대적으로 낮다는 것을 보여 주었다. 이것은 재결정된 $MgCl_2$ 및 알킬알루미늄의 존재로 인한 $SiO_2$의 표면적 감소에 기인할 수 있다. 또한, $SiO_2/MgCl_2$ 담지된 메탈로센 촉매는 $SiO_2$에 담지된 메탈로센 촉매보다 활성이 높았으며 이 중 EASC-표면 처리 이원 지지체에 담지된 메탈로센촉매가 1.9 kg PE/($mmol-Zr^*hr$)의 가장 높은 활성을 보였다. 이것은 EASC가 강한 루이스 산으로 작용하기 때문이다. 또한, 사용된 알킬알루미늄의 리간드가 클수록 생성된 중합체의 입자 표면이 더 거칠었다.

• 환경위생공학
• /
• 제16권4호
• /
• pp.62-68
• /
• 2001

The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of iron wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved iron. This study was aimed at gathering the basic data of iron wire dissolution- recovery process and proposes the reaction condition of iron wire dissolution- recovery process rind the factors influencing those reactions. The results were as follows : 1 . Hydrogen peroxide dissolution method used hydrochloric acid as the catalyst. 1. In the dissolution of iron wire(1.668 g), the condition of reaction was E1702(30 ml), HCI(20 ml) and $H_2O$(200 ml) ; time of the reaction was 18 min. P.W.(Piece weight) was 7.75 mg, and C.R. was $2.34{\;}{\Omega}$ 2. In the dissolution of iron wire(1.529 g), the condition of reaction was H7O2(30 ml), HCI(20 ml) and $H_2O$(200 ml), time of the reaction was 21 min., P.W.(Piece weight) was 7.73 mg, and C.R. was $2.35{\;}{\Omega}$. Hydrogen peroxide dissolution method used sulfuric acid as the catalyst. 1. In the dissolution of iron wire(0.834 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and 1702(5 ml) ; time of the reaction was 5 min.30 sec, P.W.(Piece weight) was 7.74 mg, and C.R. was $2.33{\;}{\Omega}$ 2. In the dissolution of iron wire(1.112 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and $H_2O_2$(5 ml) ; time of the reaction was 4 min.30 sec, P.W.(Piece weight) was 7.75 mg, and C.R. was $2.33{\;}{\Omega}$. Hydrogen peroxide dissolution method used hydrochloric acid and sulfuric acid as the catalyst confirmed a clean technology, because there were not occurred a pollutant discharged in the existing method.

• 대한화학회지
• /
• 제55권5호
• /
• pp.842-845
• /
• 2011

Wet air oxidation (WAO) of oily sludge was carried out using $Fe^{3+}$ as catalyst, placed in a 0.5 L batch autoclave in the temperature range of $250-330^{\circ}C$. Experiments were conducted to investigate the effects of temperature, the initial COD, reaction time, concentration of catalyst and $O_2$ excess (OE) on the oxidation of the oily sludge. The results showed that in the WAO 88.4% COD was achieved after 9 min reaction at temperature of $330^{\circ}C$, OE of 0.8 and the initial COD of 20000 mg/L. Temperature was found to have a significant impact on the oxidation of oily sludge. Adding a catalyst significantly improved the COD removal. Homogenous catalyst, $Fe^{3+}$, showed effective removal for pollutants. COD removal was 99.7% in the catalytic wet air oxidation (CWAO) over $Fe^{3+}$ catalyst. The results proved that the CWAO was an effective pretreatment method for the oily sludge.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.17-24
• /
• 2022

This work examined the effect of mixing transition metal-based additives [FeCl₃, Fe-containing paper mill sludge (PMS), CoCl₂·H₂O, ZrO₂, and α-Fe₂O₃] on the thermochemical conversion of coffee waste (CW) in carbon dioxide-assisted pyrolysis process. Compared to the generation amounts of syngas (0.7 mole% H₂ & 3.0 mole% CO) at 700℃ from single pyrolysis of CW, co-pyrolysis in the presence of Fe- or Zr-based additives resulted in the enhanced production of syngas, with the measured concentrations of H₂ and CO ranging 1.1-3.4 mole% and 4.6-13.2 mole% at the same temperature, respectively. In addition, α-Fe₂O₃ biochar possessed the adsorption capacity of As(V) (19.3 mg g^-1) comparable to that of ZrO₂-biochar (21.2 mg g^-1). In conclusion, solid-type Fe-based additive can be highly considered as an efficient catalyst to simultaneously produce syngas (H₂ & CO) as fuel energy resource and metal-biochar as sorbent.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2004년도 제26회 학술발표회 초록집
• /
• pp.91-91
• /
• 2004

• 공업화학
• /
• 제23권3호
• /
• pp.302-307
• /
• 2012

오존/활성탄 공정 및 오존/촉매 공정과 같은 고급산화공정을 사용하여 페놀의 분해를 비교하였다. 촉매는 조립 활성탄에 팔라듐(Pd/AC), 망간(Mn/AC), 코발트(Co/AC) 및 철(Fe/AC)을 담지하여 제조하였다. 1 h 동안의 반응결과, 포화 오존농도(1.48 mg/L)에서 용존 오존의 분해율은 Mn/AC (45%) > Pd/AC (42%) > Co/AC (33%) > AC (31%) > Fe/AC (27%)의 순서로 감소하였으며, 페놀의 제거효율은 Mn/AC (89%) > Pd/AC (85%) > Co/AC (77%) > AC (76%) > Fe/AC (71%)의 순서로 감소하였다. 총유기탄소(TOC)의 잔존 비율(C/Co)은 Pd/AC (0.29) < Mn/AC (0.36) < AC (0.40) < Co/AC (0.49) < Fe/AC (0.51)의 순서로 증가하였다. Co/AC 및 Fe/AC 공정은 오존/활성탄 공정과 비교하여 촉매효과가 거의 없었다. 또한 페놀이 분해되면서 생성되는 중간물질인 하이드로퀴논과 카테콜의 최대 농도는 Mn/AC > AC > Co/AC > Fe/AC > Pd/AC 공정의 순서로 감소하였으며, Pd/AC 공정의 경우, 1 h 동안 반응 후, 이러한 중간물질들이 검출되지 않았다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.230.2-230.2
• /
• 2015

Nanoparticles of magnesium ferrite are used as a heterogeneous catalyst, humidity sensor, oxygen sensor and cure of local hyperthermia. These applications usually utilize the magnetic behavior of these nanoparticles. Moreover, magnetic properties of nanoferrites exhibit rather complex behavior compared to bulk ferrite. The magnetic properties of ferrites are complicated by spins at vortices, surface spins. Reports till date indicate strong dependency on the structural parameters, oxidation state of metal ions and their presence in octahedral and tetrahedral environment. Thus we have carried out investigation on magnesium ferrite nanoparticles in order to study coordination, oxidation state and structural distortion. For present work, magnesium ferrite nanoparticles were synthesized using nitrates of metal ions and citric acid. Fe L-edge spectra measured for these nanoparticles shows attributes of $Fe^{3+}$ in high spin state. Moreover O K-edge spectra for these nanoparticles exhibit spectral features that arises due to unoccupied states of O 2p character hybridized with metal ions. Mg K-edge spectra shows spectral features at 1304, 1307, 1311 and 1324 eV for nanoparticles obtained after annealing at 400, 500, 600, 800, 1000, and $1200^{\circ}C$. Apart from this, spectra for precursor and nanoparticles obtained at $300^{\circ}C$ exhibit a broad peak centered around 1305 eV. A shoulde rlike structure is present at 1301 eV in spectra for precursor. This feature does not appear after annealing. After annealing a small kink appear at ~1297 eV in Mg K-edge spectra for all nanoparticles. This indicates changes in local electronic structure during annealing of precursor. Observed behavior of change in local electronic structure will be discussed on the basis of existing theories.

• Journal of Microbiology and Biotechnology
• /
• 제26권11호
• /
• pp.1965-1971
• /
• 2016

Livestock wastewater containing high concentrations of ammonium and nitrate ions was pretreated with microbubbles and an Fe/MgO catalyst prior to its application in microbial fuel cells because high ion concentrations can interfere with current generation. Therefore, tests were designed to ascertain the effect of pretreatment on current generation. In initial tests, the optimal amount of catalyst was found to be 300 g/l. When 1,000 ml/min $O_2$ was used as the oxidant, the removal of ammonium- and nitrate-nitrogen was highest. After the operating parameters were optimized, the removal of ammonium and nitrate ions was quantified. The maximum ammonium removal was 32.8%, and nitrate was removed by up to 75.8% at a 500 g/l catalyst concentration over the course of the 2 h reaction time. The current was about 0.5 mA when livestock wastewater was used without pretreatment, whereas the current increased to $2.14{\pm}0.08mA$ when livestock wastewater was pretreated with the method described above. This finding demonstrates that a 4-fold increase in the current can be achieved when using pretreated livestock wastewater. The maximum power density and current density performance were $10.3W/m^3$ and $67.5W/m^3$, respectively, during the evaluation of the microbial fuel cells driven by pretreated livestock wastewater.

• 공업화학
• /
• 제2권3호
• /
• pp.279-288
• /
• 1991

몇 종류의 산화물을 혼합하여 그 장점들이 촉매의 특성으로 나타나도록 하는 복합산화물 촉매의 한 종류로서 스피넬 구조를 이루는 Mg- 및 Zn-페라이트를 촉매로 선정하여 Cr 치환에 따른 물성을 분석하고, 에틸벤젠의 탈수소 반응에 대하여 연구하였다. 촉매의 특성 분석에는 XRD, BET, TG/DTA, ESCA, TEM, TPD등의 분석법을 사용하였다. 페라이트 촉매에 대한 Cr 치환 효과를 검토하기 위하여 물성을 종합적으로 분석한 결과, 표면으로의 확산이 용이한 Cr 은 촉매의 표면적 증가와 구조의 안정성에 기여하는 구조적인 조촉매로서 작용하였다. 촉매의 반응성 실험에 있어서는 Cr의 치환에 따른 활성변화를 검토하였는데, $MgCr_xFe_{2-x}O_4$ 촉매에서 Cr 치환량이 증가할수록 산소의 유동성이 작아져 완전산화반응이 억제되고 스티렌으로의 선택도가 증가하였다.