• 제목/요약/키워드: Fault zone architecture

검색결과 6건 처리시간 0.02초

Kinematic Interpretation for the Development of the Yeonghae Basin, Located at the Northeastern Part of the Yangsan Fault, Korea

  • Altaher, Zooelnon Abdelwahed;Park, Kiwoong;Kim, Young-Seog
    • 지질공학
    • /
    • 제32권4호
    • /
    • pp.467-482
    • /
    • 2022
  • The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

24 January 2020 Sivrice (Elazığ) earthquake damages and determination of earthquake parameters in the region

  • Isik, Ercan;Aydin, Mehmet Cihan;Buyuksarac, Aydin
    • Earthquakes and Structures
    • /
    • 제19권2호
    • /
    • pp.145-156
    • /
    • 2020
  • The 24 January 2020 (Mw=6.8) earthquake with epicentre in Elazığ (Sivrice) on the East Anatolian Fault Zone caused loss of life and property. The information was given about the seismotectonic setting and regional seismicity along this fault zone and aftershock activity and ground motion data of this earthquake. Earthquake parameters were obtained for five different earthquake stations which were closer to the epicentre. Horizontal and vertical design spectra were obtained for the geographic locations for each earthquake station. The obtained spectra for the earthquake epicentre were compared with selected appropriate attenuation relationships. The damages after earthquake were evaluated via geotechnical and structural aspects. This study also aims to investigate the cause-effect relationships between structural damage in reinforced-concrete and masonry structures, respectively. The lack of engineering services was effective on the amount of damage in masonry structures. Insufficient reinforcement and concrete strength, dimensions and inadequate detailing increased the amount of damage in reinforced-concrete structures. Importance should be given to negative parameters that may weaken the defence mechanisms of structures for earthquake-resistant structural design.

영덕단층 북부의 기하와 운동학적 특성 (Geometry and Kinematics of the Northern Part of Yeongdeok Fault)

  • 김광연;하상민;이성준;임보성;김민철;손문
    • 광물과 암석
    • /
    • 제36권1호
    • /
    • pp.55-72
    • /
    • 2023
  • 이번 연구는 영덕단층 일원을 대상으로 실시된 상세 지표지질조사에서 수집된 다양한 구조요소들의 기하와 운동학적 자료 그리고 단층암의 대자율이방성 분석 자료를 바탕으로 영덕단층의 내부구조 그리고 기하와 운동학적 특성을 규명하고자 하였다. 영덕단층은 영덕군 강구면 오포리에서 울진군 매화면 길곡리와 기성면 방율리까지 연장되며, 4.6-5.0 km (평균 4.77 km)의 우수향 수평변위로 고원생대부터 중생대에 이르는 다양한 암종을 절단하거나 암상경계를 이룬다. 영덕단층은 4개의 기하학적 분절로 구분되며, 대부분 노두에서 남-북 내지 북북서 주향에 54° 이상 고각으로 동쪽으로 경사지고 있으나 북쪽으로 갈수록 서쪽으로 54°-82° 경사지는 노두가 증가한다. 영덕단층은 모암의 암종에 따라 0.3-15 m 범위의 다양한 폭을 가진 단층핵과 단층대 내부구조의 차이를 보이는데, 이는 모암의 연성도, 구성광물, 입자크기, 이방성과 같은 물성 차이에 기인하는 것으로 해석된다. 이번 연구에서 새롭게 도출한 고응력장 및 대자율이방성 분석 결과와 기존 연구 결과를 종합하면, 영덕단층은 (1) 백악기말~신생대초에 북서-남동 최대수평응력(σHmax)과 북동-남서 최소수평응력(σHmin) 하에서 좌수향 주향이동운동을 겪은 이후, (2) 신생대 고진기에 북동-남서 최대수평응력과 북서-남동 최소수평응력 하에서 우수향 주향이동운동을 겪었음을 지시한다. 이중 고진기에 발생한 우수향 주향이동운동에 의한 변형이 가장 우세하였으며 이후 지각변형은 미미하였던 것으로 해석된다.

수리역학적연계 3차원 입자유동코드를 사용한 유체주입에 의한 단층변형 모델링: DECOVALEX-2019 Task B (Modelling of Fault Deformation Induced by Fluid Injection using Hydro-Mechanical Coupled 3D Particle Flow Code: DECOVALEX-2019 Task B)

  • 윤정석
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.320-334
    • /
    • 2020
  • 본 수치해석연구에서는 국제공동연구프로젝트 DECOVALEX2019의 Task B의 일환으로 PFC3D를 기반으로한 수리역학연계모델을 개발하여 스위스 Mont Terri 지하연구시설에서 수행된 단층의 유체주입으로 인한 슬립시험을 모사하였다. 이를통해, 개발한 PFC3D 수리역학연계모델이 가진 한계점과 향후 보완할 점을 검토하고자 하였다. PFC3D를 기반으로한 3차원 입자결합모델 내 공극-유동통로모델을 생성하였으며 이를 사용하여 Mont Terri Step 2 단층내 유체주입실험을 모사하였다. 모델링결과 단층대를 따라 주입유체의 유동에 의한 단층대의 변형을 확인하였지만, 관측정에서의 시간에 따른 수압변화는 현장측정치와 부분적으로 일치하는 경향을 확인하였다. 현장측정 관측수압은 초기 유체주입 압력증가에 거의 변화를 보이지 않고 주입수압이 최대치에 도달할때쯤 급격한 증가를 보이는반면, 모델링에서는 주입압력이 증가함에 따라 관측수압도 부드럽게 증가하는 경향을 보였다. 이러한 부분적으로 일치하는 결과의 원인으로는 Mont Terri 현장의 단층을 모사하는 방법에 기인하는 것으로 판단하다. PFC3D에서는 단층을 손상대와 코어균열의 조합으로 모사하였고 단층대의 두께가 약 2 m로 주입유체가 단층대를 통해 유동하도록 모사하였기에 현장에서의 주입유체의 단층내 유동보다 그 유동범위가 크게 모사되었다고 판단한다. 또한, 현장단층에서와 같이 단층내부에 존재하는 충진물질로 인해 단층내 수리유동이 제한되어 국부적으로 과잉공급수압이 형성될 수 있는 기재를 모사하지 못한 점 또한 모델링 결과와 현장측정결과가 부분적으로 일치하는 원인일 수 있다. 단층변형의 경우는 모델링결과와 현장측정결과 유사한 수준으로 일치하는 결과를 확인하였다. 수치모델을 변형하여 단층대의 두께를 감소시키고 단층내 충진 물질의 비균질적인분포를 모사할 수 있는 방법론에 대한 후속 연구를 통해 PFC3D 수리역학연계모델의 유체주입으로 인한 단층활성화 연구로의 적용성을 향상시키는 것을 제안하고 한다.

Autonomic Self Healing-Based Load Assessment for Load Division in OKKAM Backbone Cluster

  • Chaudhry, Junaid Ahsenali
    • Journal of Information Processing Systems
    • /
    • 제5권2호
    • /
    • pp.69-76
    • /
    • 2009
  • Self healing systems are considered as cognation-enabled sub form of fault tolerance system. But our experiments that we report in this paper show that self healing systems can be used for performance optimization, configuration management, access control management and bunch of other functions. The exponential complexity that results from interaction between autonomic systems and users (software and human users) has hindered the deployment and user of intelligent systems for a while now. We show that if that exceptional complexity is converted into self-growing knowledge (policies in our case), can make up for initial development cost of building an intelligent system. In this paper, we report the application of AHSEN (Autonomic Healing-based Self management Engine) to in OKKAM Project infrastructure backbone cluster that mimics the web service based architecture of u-Zone gateway infrastructure. The 'blind' load division on per-request bases is not optimal for distributed and performance hungry infrastructure such as OKKAM. The approach adopted assesses the active threads on the virtual machine and does resource estimates for active processes. The availability of a certain server is represented through worker modules at load server. Our simulation results on the OKKAM infrastructure show that the self healing significantly improves the performance and clearly demarcates the logical ambiguities in contemporary designs of self healing infrastructures proposed for large scale computing infrastructures.

한국 동쪽 대륙주변부의 구조적 진화와 동해의 형성 (Structural Evolution of the Eastern Margin of Korea: Implications for the Opening of the East Sea (Japan Sea))

  • 김한준;주형태;이광훈;유해수;박건태
    • 자원환경지질
    • /
    • 제39권3호
    • /
    • pp.235-253
    • /
    • 2006
  • 해양탄성파 프로파일을 정밀수심 및 자력자료와 함께 해석하여, 일본열도가 분리되어 동해가 형성된 한반도의 대륙 주변부에서 진행된 리프팅과 지각의 분리 과정을 연구하였다. 한반도의 주변부는 바다쪽으로 리프트분지와 융기된 리프트 측면부, 그리고 경사가 급한 대륙사면이 연속된, 비활성 대륙주변부에서 전형적으로 볼 수 있는 기본적인 리프트구조로 이루어져 있다. 북쪽지역에서는 한반도로부터 연장되고 부분적으로 분절된 대륙지각인 한국대지에서 리프팅이 발생하였다. 한국대지는 상대적으로 넓은 신장지역을 제공하여 많은 수의 리프트를 형성하였다. 한국대지 내에서 두 개의 눈에 띄는 리프트 분지(온누리와 반달 분지)는 주된 synthetic 단층과 더 작은 규모의 antithetic 단층에 의해 형성되어 넓고 대칭적인 구조를 갖는다. 이들 분지에서 변위가 큰 경계단층지역은 볼록한 경사면을 가지며 주향방향으로 지그재그 모양을 보인다. 대조적으로, 남쪽 주변부에는 비대칭적인 반지구로서 하나의 좁은 리프트분지(후포 분지)가 길게 형성되어 있다. 한반도 주변부의 리프팅은 주향이동 운동에 의한 변위가 아니라 대륙사면의 기저부를 따라 발생하였다고 유추되는 지각의 분리에 수직하는 서쪽 및 남동방향의 신장의 결과인 정단층작용에 의해 주로 유도되었다고 해석된다. 리프팅 동안에는 화산작용이 거의 없었으나 해저면 확장의 초기단계에서는 상당한 화산작용이 수반되었으며 이것은 특히 남쪽지역에서 리프트에 의해 유도되는 맨틀대류뿐만 아니라 슬랩에 의해 유도되는 약권의 상승을 반영한다고 보여 진다. 동해의 생성과 관련된 한반도 주변부의 구조 및 화산운동은 후열도 환경에서의 약권 상승에 의해 영향을 받는 화산작용을 수반한 비활성 대륙주변부에서 일어나는 과정으로 설명할 수 있다고 해석된다.