• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1689-1696
• /
• 2017

In recent academic and industrial circles of the Republic of Korea, the securement of available reactive power reserve against the line faults is at issue. Thus, simulations have been performed for the securing of effective reactive power reserve (effective Q) to prepare for the line faults and improve reactive power monitoring and control methods. That is, a research has been conducted for the fast-decoupled Newton-Raphson method. In this study, a method that distinguishes source and sink regions to carry out faster provision of information in the event of line fault has been proposed. This method can perform quantification with the formula that calculates voltage variations in the line flow. The line flow and voltage changes can be easily induced by the power flow calculation performed every second in the operation system. It is expected that the proposed method will be able to contribute to securement of power system stability by securing efficient reactive power. Also, the proposed method will be able to contribute to prepare against contingencies effectively. It is not easy to prepare quickly for the situation where voltage drops rapidly due to the exhaustion of reactive power source by observing voltage information only. This paper's simulation was performed on the large scale Korean power system in steady state.

• Earthquakes and Structures
• /
• 제2권3호
• /
• pp.257-277
• /
• 2011

An evaluation is presented of the response of a 3-storey R/C structure during the destructive Lefkada earthquake of 14/08/2003. Key aspects of the event include: (1) the unusually strong levels of ground motion (PGA = 0.48 g, $SA_{max}$ = 2.2 g) recorded approximately 10 km from fault, in downtown Lefkada; (2) the surprisingly low structural damage in the area; (3) the very soft soil conditions ($V_{s,max}$ = 150 m/s). Structural, geotechnical and seismological aspects of the earthquake are discussed. The study focuses on a 3-storey building, an elongated structure of rectangular plan supported on strip footings, that suffered severe column damage in the longitudinal direction, yet minor damage in the transverse one. Detailed spectral and time-history analyses highlight the interplay of soil, foundation and superstructure in modifying seismic demand in the two orthogonal directions of the building. It is shown that soil-structure interaction may affect inelastic seismic response and alter the dynamic behavior even for relatively flexible systems such as the structure at hand.

• 디지털콘텐츠학회 논문지
• /
• 제6권1호
• /
• pp.85-88
• /
• 2005

분산 멀티미디어 응용에 대한 요구는 정교한 QoS 관리를 위해서 필요하다. 분산 멀티미디어 시스템 견지에서 보면, QoS의 가장 중요한 범주는 시간성, 볼륨, 신뢰성이다. 본 논문에서는 결함 허용을 통해서 신뢰성을 향상시키는 방법에 대해서 기술한다. ERA는 분산 멀티미디어에서 하나의 소프트웨어 오류를 자동적으로 복구할 수 있는 시스템이다. 본 논문은 규칙-기반 DEVS 모델링과 시뮬레이션 기법을 사용하면서 분산 멀티미디어 상에서의 오류 복구 시스템의 성능 분석을 설명한다. DEVS에서 하나의 시스템은 시간 입력, 상태, 출력 및 함수들을 가지고 있다.

• 디지털콘텐츠학회 논문지
• /
• 제9권4호
• /
• pp.785-790
• /
• 2008

디지털 캐로절은 사용자들에게 미디어 동기화 메카니즘을 통하여 미디어 객체 공유를 가능하게 한다. 본 시스템은 공동 작업에 참여한 사용자들이 다른 참여자들에게 같은 뷰로써 공유된 미디어 또는 오류 객체들을 참조할 수 있도록 구축한다. 본 논문에서는 결함 허용을 통하여 신뢰성을 향상시키는 방법에 대해서 기술한다. ER은 분산 멀티미디어에서 하나의 소프트웨어 오류를 자동적으로 복구할 수 있는 시스템이다. 본 논문은 규칙-기반 DEVS(Discrete Event System Specification) 모델링과 시뮬레이션 기법을 사용하면서 분산 멀티미디어 상에서의 오류 복구 시스템의 성능 분석을 설명한다. DEVS에서 하나의 시스템은 시간, 입력, 상태, 출력 및 함수들을 가지고 있다.

• 전기학회논문지
• /
• 제58권12호
• /
• pp.2303-2310
• /
• 2009

Defense systems are needed to prevent catastrophic failures of a power grid due to cascaded events. Cascaded events can be attributed to improper operations of protective relays. Especially, it is the most dangerous problem that trips of backup relays by overload. In this paper, a new algorithm of predicting Zone 3 acting time of distance relay is proposed using the real time synchronized data from PMUs on the transmission system when the power system is danger. In the proposed, some part of the power system are outage when some unexpected fault in the power system, the algorithm will monitor the impedance locus of distance relay. At this time, if there is a big change of Impedance locus, the algorithm will calculate the Zone 3 acting time of the distance relay by the over load. In the case studies, the estimation and simulation network have been testified and analysed in Matlab Simulink.

• 한국정밀공학회지
• /
• 제9권4호
• /
• pp.22-35
• /
• 1992

In highly automated machining centers, intelligent sensor fddeback systems are indispensable on order to monitor their operations, to ensure efficient metal removal, and to initate remedial action in the event of accident. In this study, an on-line tool wear detection system for thrning operations is developed, and experimentally evaluated. The system employs multiple sensors and the signals from these sensors are processed using a multichannel autoegressive (AR) series model. The resulting output from the signal processing block is then fed to a previously tranied artificial neural network (multiayered perceptron) to make a final decision on the state of the cutting tool. To learn the necessary input/output mapping for tool wear detection, the weithts and thresholds of the network are adjusted according to the back propagation (BP) method during off-line training. The results of experimental evaluation show that the system works well over a wide range of cutting conditions, and the ability of the system to detect tool wear is improved due to the generalization, fault-tolearant and self-ofganizing properties of the neural network.

• 한국소음진동공학회논문집
• /
• 제25권8호
• /
• pp.553-558
• /
• 2015

This paper aims at making a dedicated vibration monitoring and diagnosis framework for 3MW WTG(wind turbine generator). Within the scope of the research, vibration data of WTG drive train are used and WTG operating conditions are involved for dividing the vibration data class which included transient and steady state vibration signals. We separate two health detections which are CHD(continuous health detection) and EHD(event health detection). CHD has function of early detection and continuous monitoring. EHD makes the use of finding vibration values of fault components effectively by spectrum matrix subsystem. We proposed framework and showed application for 3MW WTG in a practical point of view.

• 문화기술의 융합
• /
• 제6권4호
• /
• pp.783-788
• /
• 2020

낙뢰의 직격이나 유도에 의해 발생되는 서지, 전력계통의 차단기의 빈번한 개폐동작 등은 과도 과전압이 발생하며 이는 변압기, 차단기, 전력기기의 정상운전에 지장을 초래하게 된다. 본 연구는 이러한 현상을 예방하기 위해 전력기기 또는 선로에 피뢰기를 병렬로 설치하여 대책을 수립하는 방법에서 한층 더 나아가 원격으로 피뢰기의 상태를 점검하며 이벤트 발생 시 즉각적인 대책을 마련하여 부가적으로 발생하는 피해를 미연에 방지함에 그 연구의 목적이 있다.

• 한국지구과학회지
• /
• 제27권3호
• /
• pp.341-347
• /
• 2006

2001년부터 2005년까지 한반도 남서부에서 발생한 7개 미소지진에 대한 진원 기구해를 분석하였다. 진원 기구해를 구하기 위하여 P파 초동극성과 SH/P 진폭비 자료를 이용한 격자탐색을 수행하였다. 분석 결과, 대부분의 지진들이 일부 역단층 성분을 포함하는 주향이동 단층 운동과 관계된 것으로 해석된다. 전체적으로 한반도 남서부 지역의 지진원에서 단층 운동을 일으키는 주 압축 응력 방향은 ENE-WSW 또는 NE-SW 방향인 것으로 해석되며, 이 결과는 남한 내의 주요 지진에 대하여 알려진 주 응력장의 방향과 유사하다.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.960-967
• /
• 2009

Power supply system of electric railway has a diversity of safety problems since it should supply high electric power to the trains moving high speed with a lot of passengers on board. This paper provides a risk assessment approach to safety management of the electric railway facilities. Construction of database from field accident information, risk assessment and management of the risk are carried out systematically to ensure the safety. The risk assessment includes hazard identification, cause analysis by FTA(Fault Tree Analysis), consequence analysis by EVA(Event Tree Analysis), and loss analysis. In terms of the severity and the probability of the accidents deduced by these analyses, the risk of the accidents is assessed by using a risk matrix designed for electric railway facilities. Based on the risk assessment, possible risk mitigation options are identified and evaluated by analyzing their impact on the risk reduction and their cost benefit ratio. The long-term safety of the electric railway facilities can be ensured by renewal of the risk assessment and the risk mitigation option analysis with continuous accident database update. The proposed approach is applied to the electric railway facilities of Korean railway based on the accident data from 2002 to 2008.