• 한국연안방재학회지
• /
• 제1권4호
• /
• pp.149-155
• /
• 2014

Flexible risers have been used extensively in recent years for floating and early production systems. Such risers offer the advantage of having inherent heave compliance in their catenary thereby greatly reducing the complexity of the riser-to-rig and riser-to subsea interfaces. Another advantage with flexible risers is their greater reliability. Concerns about fatigue life, gas permeation and pigging of lines have been overcome by extensive experience with these risers in production applications. In this paper, flexible riser analysis results were compared through coupled and uncoupled dynamic analyses methods. A time domain coupled analysis capability has been developed to model the dynamic responses of an integrated floating system incorporating the interactions between vessel, moorings and risers in a marine environment. For this study, SPM (Single Point Mooring) system for an FSU in shallow water was considered. This optimization model was integrated with a time-domain global motion analysis to assess both stability and design constraints of the flexible riser system.

• Tribology and Lubricants
• /
• 제39권5호
• /
• pp.212-215
• /
• 2023

Diaphragm compressors play a crucial role in safely compressing large volumes of high-purity hydrogen gas without contamination or leakage, thereby ensuring quality and reliability. Diaphragm compressors use a thin, flat, triple-layered diaphragm plate that is subjected to repetitive piston pressure for compression. They are usually made of metallic materials such as stainless steel or Inconel owing to their high-pressure resistance. However, since they are consumable components, they fail due to fatigue from repetitive pressure and vibration stress. This study aims to evaluate the scratch characteristics of diaphragms in operational environments by conducting tests on three different samples: Inconel 718, AISI 301, and Teflon-coated AISI 301. The Inconel 718 sample underwent a polishing process, the AISI 301 sample used raw material, and the Teflon coating was applied to the AISI 301 substrate at a thickness of 50 ㎛. To assess the scratch resistance, reciprocating motion friction tests were performed using a tribometer, utilizing 220 and 2000 grit sandpapers as the counter materials. The results of the friction tests suggested that the Teflon-coated sample exhibited the lowest initial friction coefficient and consistently maintained the lowest average friction coefficient (0.13 and 0.11 with 220 and 2000 grit, respectively) throughout the test. Moreover, the Teflon-coated diaphragm showed minimal wear patterns, indicating superior scratch resistance than the Inconel 718 and AISI 301 samples. These findings suggest that Teflon coatings may offer an effective solution for enhancing scratch resistance in diaphragms, thereby improving compressor performance in high-pressure hydrogen applications.

• Tribology and Lubricants
• /
• 제40권1호
• /
• pp.24-27
• /
• 2024

A monotype valve body for a dual clutch transmission has the potential to reduce costs, weight, and manufacturing time by modularizing various parts, including those of existing solenoid packs and valve bodies, into one through the application of super-precision die casting technology. However, this approach may lead to challenges such as reduced rigidity and increased interference due to modularization and compactness, impacting both product performance due to the reduced weight as well as durability and reliability. Unlike existing products, this approach requires a high-precision thin-wall block to avoid more complicated flow line formation, interference between flow lines, and leaks, as well as a strict quality requirement standard and precise inspections including detection of internal defects. To conduct precise inspections, we built an equivalent model corresponding to a driving distance of 300,000 km. Testing involved simulating actual road loads using a real vehicle and a chassis dynamometer in the FTP-75 mode (EPA Federal Test Procedure). The aim of the study was to establish a vehicle load-based part durability model for manufacturing a mono-type valve body and to develop fundamental technology for part weight reduction through preliminary design by introducing analytical weight reduction technology based on the derived results.

• 마이크로전자및패키징학회지
• /
• 제10권3호
• /
• pp.19-27
• /
• 2003

플립칩 전자패키지에서 칩과 기판(PCB)를 연결할 때, 통상적으로 칩쪽은 금속패드/UBM 처리를 기판 쪽은 표면처리를 한 후 솔더로 연결하는데, 이 때 사용되는 UBM이나 표면처리에 따라, 칩/솔더, PCB/솔더에 생성되는 금속간 화합물의 종류와 두께 및 솔더의 조성이 변하게 되어 궁극적으로 솔더 접합부의 기계적 신뢰성에 영향을 주게 된다. 본 연구에서는 Cu와 Au/Ni의 두가지 금속 패드가 무연솔더의 저주기 피로특성에 어떠한 영향을 미치는 지에 대해 고찰해 보았다. 저주기 피로 실험은 Cu나 Au/Ni이 표면처리 된 기판에 무연솔더 (Sn-3.5Ag, Sn-3.5Ag-1.5Cu, Sn-3.5Ag-XBi(X=2.5, 7.5), Sn-0.7Cu)를 리플로하여 총변위를 변화시키면서 상온에서 시행하였다. 기판의 표면처리에 관계없이 Sn-3.5Ag, Sn-3.5Ag-XCu(X-0.75, 1.5), Sn-0.7Cu 합금이 Sn-3.5Ag-7.5Bi 합금보다 피로저항성이 현격히 좋았으며, Au/Ni 표면처리한 솔더 접합부가 Cu 처리한 경우보다 피로저항성이 뛰어난 것으로 나타났다. 파괴 후 단면을 조사한 결과 계면에 형성된 금속간 화합물 내에 미세균열이 발견되었는데, Cu 표면처리를 사용한 경우 더 많은 미세균열이 생성된 것을 볼 수 있었다. Sn-3.5Ag, Sn-3.5Ag-Cu(X=0.75, 1.5), Sn-0.7Cu 합금의 경우 금속간 화합물 내에 생기는 미세 균열이 거시 균열로 성장하지 않고 파단은 항상 솔더 내부로 일어난 반면. Bi를 함유한 솔더의 경우, 기판의 표면처리에 상관없이 금속간 화합물/솔더 계면으로 균열이 생성 진전되어 다른 솔더합금에 비해 열악한 피로저항성을 나타내는 것으로 보인다. 이것은 Bi의 금속간화 합물/솔더 입계 편석이나 Bi 합금이 다른 합금에 비해 높은 경도값을 가지는 것에 인한 것으로 보여 진다.

• 대한간호학회지
• /
• 제20권2호
• /
• pp.131-141
• /
• 1990

Recently, the rate of cesarean section in Korea has been increasing. The results of several previous studies in foreign countries on the emotional responses of cesarean section mothers showed that they might experience difficulties in the mother- infant interaction due to fatigue, lack of early mother - infant interaction, disappointments, anger, feelings of loss of control, and other factors. Human behavior is said to be determined by one's self concept, and self concept is influenced by both internal and external environmental factors. A scale to measure the self concept of cesarean section mothers was needed in order to identify those who might have difficulties in the mother- infant interactions in future. The purposes of this study were to develop a measuring scale, and to test its reliability and validity. The process of this study was as follows. A structured interview was done with 50 cesarean section and vaginal delivery mothers to find their state of emotional reaction after giving birth to their babies. Based on the results of the interviews, a 50 items Likert scale was developed. The self concept of 268 cesarean section and vaginal delivery mothers who were hospitalized at six hospital in seoul were measured, during the period between Feb. 1 and April 30. Reviewing the discriminating power of each item by means of crosstabulation, ten items were selected for the final scale. The reliability and validity of this ten item scale were tested by Cronbach's alpha and t-test, using spss pc＋package. The results of this study and recommendation are as follows. 1. The ten selected items were as follows. I feel pains in my breast. (－) I have a good appetite now. (＋) I feel pains in my flank. (－) I feel fine now. (＋) My body seems to have returned to its prepregnant state. (＋) Thinking of the delivery process, I feel sorry. (－) I want to hold my baby in my arms. (＋) I want to keep my own life, even if I became a mother. (－) I want to delegate the care of the baby to my mother / mother in law. (－) I think baby is my alter ego. (＋) 2. The reliability of this scale was tested by Cronbach's alpha, and the coefficient of this scale was .8066. 3. The construct validity of this scale was tested by means of known group methods. The value of self concept for cesarean section mother was significantly lower than for vaginal delivery mothers(t＝-5.51, df＝266, p＝0.007). 4. The criterion validity of this scale was tested indirectly. Though this scale could discriminate the differences in the self concept between cesarean section and vaginal delivery mothers, the five items on the personal self concept scale didn's show any differences between cesarean section and vaginal delivery mothers. Therefore, the study indicates that those who shows lower values in the personal self concept measurement, that is, lower than 12.03 points, could be regaled as “risk mothers” 5. Further studies using this scale to clarify the influencing factors on negative self concept are strongly recommended.

• 마이크로전자및패키징학회지
• /
• 제17권1호
• /
• pp.9-17
• /
• 2010

본 논문은 $20^{\circ}$ 각도의 굽힘과 50 ${\mu}m$ 인장조건에서 PGA (Pin Grid Array) 패키지의 lead pin에 발생하는 von Mises 응력과 전 변형률 에너지 밀도를 lead pin 소재의 열처리 온도 조건에 따라 유한요소법을 이용하여 해석하였다. 해석결과에 따르면 lead pin의 코너부와 리드핀의 헤드부와 솔더의 경계면이 국부적으로 응력이 집중되는 가장 취약한 위치이며 lead pin의 열처리 온도가 높을수록 발생하는 최대 응력과 변형률 에너지 밀도가 낮아져서 신뢰성이 우수한 것으로 판단된다. 또한 lead pin의 코너부에 라운드가공을 하면 헤드부와 솔더의 경계면에서 발생하는 von Mises 응력과 전변형률 에너지 밀도가 감소하였다. 이와 같은 해석결과는 전 변형률 에너지 밀도가 증가할수록 솔더의 피로수명이 감소하는 연구결과에 미루어볼 때 열처리를 통해 리드핀의 기계적특성을 변경하면 PGA 패키지의 신뢰성을 향상시킬 수 있음을 의미한다. 따라서, 리드핀의 형상최적화와 열처리를 통한 최적화된 소재특성을 통해 PGA 패키지의 신뢰성 향상이 요구된다.

• 동의생리병리학회지
• /
• 제18권5호
• /
• pp.1242-1253
• /
• 2004

Leukemia is a blood disease that occurs in the abnormal process of leukocyte maturation. Its main medical treatment is chemical therapy and bone medical transplant. But its treatments give rise to ill effects and sequela. At present, the cause of leukemia is not fully understood. But oriental concept of curing leukemia is the holistic thinking that emphasizes the unity, wholeness, and the relationship between the human organs, including western medical concept of blood cause. So it is estimated that holistic medical treatment in oriental medicine could present new medical way of curing leukemia. I read over the diary on struggles against leukemia, survey on the leukemia patients, and, medical charts in the oriental clinics that treated in the holistic way, and I interviewed the leukemia patients. With these materials, I classified the early main attacking symptoms according to the chief complaints of one hundred leukemia patients. With these results collected, I present new alternative treatment by oriental medical diagnosis. The chief early complaints that leukemia patients give are fatigue, enervation, cold, contusion, fever, high fever, sweating at sleep, myalgia, arthralgia, and dizziness, in order of main symptoms. Fatigue occurs mainly by spleen and stomach weakness and marrow shortage. So it is estimated that It is important to treat the spleen that is responsible for supplementing the marrow. Because the leukemia patients have anemia and hemorrhage, to treat the spleen is important for hematopoiesis and controlling blood. In case of cold, it penetrates into the body when the body is weak. So its treatment is to increase body's health. But the cause of fever is difficult to classify into outer cause and inner cause. But in case of children under 14 years old, fever is the main sypmptom. I think this is because children have the body with pure vital energy. Hemorrhage is thought to be the result of yin-lack and heat-miasma of spleen and stomach channels. Contusion occurs from the qi-weakness and the not-controlling-blood. Sweating at sleep is from the yin-weakness. It is found with all weak symptoms. Dizziness is from the yin-blood impairment. Weight-loss is from the marrow shortage. Myalgia and arthralgia is mainly from inner weakness, not outer maisma. Most leukemia patients have the idea that holistic treatment of leukemia could be of assistance and give help to the low immunity. So it is expected that holistic medical treatment could contribute to knowing the cause and treatment of leukemia, and give people reliability on oriental medical treatment, through the profound diagnosis of leukemia.

• 산업경영시스템학회지
• /
• 제40권3호
• /
• pp.59-65
• /
• 2017

The purpose of this study is to investigate the factors and effects of job stress of construction workers on construction accidents and turnover intention in order to improve the field work environment of construction industry which shows higher industrial accidents than other industries. To this end, research models and hypotheses were established based on previous research, and the questionnaire was distributed to 10 construction companies in Daejeon, Sejong, and Chungcheong provinces. The 301 data collected were performed statistical analysis such as basic statistical analysis, factor analysis, reliability analysis, correlation analysis, regression analysis, and logistic regression analysis using the statistical package (IBM SPSS 22). The results of this study are summarized as follows. First, job stress has a significant effect on accident occurrence. Among the sub-factors of job stress, there was positive (+) influence on work culture and relationship conflict between peers, and organizational system had negative influence. Job demands, compensation incompetence, and job instability were not statistically significant. Therefore, it is necessary to concentrate on the factors of work culture, organizational system, and relationship conflict in the construction site. Second, job stress has positive effect on turnover intention. Job stress, inadequacy of compensation, and work culture were positively related to turnover intention. Third, job demands have a slightly greater impact than compensatory inadequacies. The factors that make the job turnover more important are the excessive job burdens such as respect, internal motivation, responsibility rather than expectation non-conformity, time pressure, increase of work load. Therefore, in order to reduce the turnover intention of the construction worker, it is necessary to pay attention to improvement of the job requirement. Fourth, the worker's job stress could overcome by exercise and fatigue elimination, work environment management, and self-opening for others. It is necessary to establish a work environment management system for counseling and intimacy formation to open up the exercise and fatigue relief program of the workers at the construction site and to open themselves between the workers and the supervisors.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.280-280
• /
• 2007

$Pb(Zr,Ti)O_3$ (PZT) 강유전체 박막은 높은 잔류 분극 (remanent polarization) 특성 때문에 현재 강유전체 메모리 (FeRAM) 소자에 적용하기 위하여 가장 활발히 연구되고 있다. 그런데 PZT 물질은 피로 (fatigue) 및 임프린트 (imprint) 등의 장시간 신뢰성 (long-term reliability) 특성이 취약한 단점을 가지고 있다. 이러한 신뢰성 문제를 해결할 수 있는 효과적인 방법 중의 하나는 $IrO_2$, $SrRuO_3$(SRO) 등의 산화물 전극을 사용하는 것이다. 많은 산화물 전극 중에서 SRO는 PZT와 비슷한 pseudo-perovskite 결정구조를 갖고 격자 상수도 비슷하여, PZT 커패시터의 강유전 특성 및 신뢰성을 향상시키는데 매우 효과적인 것으로 알려져 있다. 따라서 본 연구는 PZT 커패시터에 적용하기 위하여 SRO 박막을 증착하고 이의 전기적 특성 및 미세구조를 분석하고자 하였다. 또 실제로 SRO 박막을 상부전극과 PZT 사이의 버퍼 층 (buffer layer)으로 적용한 경우의 커패시터 특성도 평가하였다. 먼저 다결정 SRO 박막을 $SiO_2$/Si 기판 위에 DC 마그네트론 스퍼터링 법 (DC magnetron sputtering method)으로 증착하였다. 그 다음 이러한 SRO 박막의 미세구조, 결정성 및 전기적 특성이 증착 조건들의 변화에 따라서 어떤 경향성을 보이는지를 평가하였다. 기판 온도는 $350\;{\sim}\;650^{\circ}C$ 범위에서 변화시켰고, 증착 파워는 500 ~ 800 W 범위에서 변화시켰다. 또 Ar+$O_2$ 혼합 가스에서 산소의 혼합 비율을 20 ~ 50% 범위에서 변화시켰다. 이러한 실험 결과 SRO 박막의 전기적 특성 및 미세 구조는 기판의 증착 온도에 따라서 가장 민감하게 변함을 관찰할 수 있었다. 다른 증착 조건과 무관하게 $450^{\circ}C$ 이상의 온도에서 증착된 SRO 박막은 모두 주상정 구조 (columnar structure)를 형성하며 (110) 방향성을 강하게 나타내었다. 가장 낮은 전기 저항은 $550^{\circ}C$ 증착 온도에서 얻을 수 있었는데, 그 값은 약 $440\;{\mu}{\Omega}{\cdot}cm$ 이었다. SRO 버퍼 충을 적용하여 제작한 PZT 커패시터의 잔류 분극 (Pr) 값은 약 $30\;{\mu}C/cm^2$ 정도로 매우 높은 값을 나타내었고, 피로 손실 (fatigue loss)도 $1{\times}10^{11}$ 스위칭 사이클 후에 약 11% 정도로 매우 양호한 값을 나타내었다.

• Journal of Yeungnam Medical Science
• /
• 제9권1호
• /
• pp.156-166
• /
• 1992

1987년 1월 부터 1991년 6월 까지 영남대학교 영남의료원 정신과에 외래 및 입원한 정서장애 환자중 불안장애로 진단 받은 환자 남자 127명(77.3%), 여자 38명(23.0%)인 총 165명을 대상으로 하였다. 이들에게 Zung의 자가 평가 불안척도를 사용하여 불안을 측정한 결과는 다음과 같다. 불안성적의 평균 총점은 $42.40{\pm}7.74$을 보였다. 불안의 항목별 상위성적은 두통 및 신체동통, 피로, 불안, 공황, 빈뇨 등의 순서로 높았다. 항목별 하위성적은 초조, 우려, 호흡곤란, 발한, 불면 등의 항목이었다. SAS에서 심계항진과 공포, 심계항진과 진전, 피로와 혼돈, 졸도와 현기증, 공포와 불안, 악몽과 공포, 혼돈과 공황, 현기증과 혼돈, 심계항진과 공황, 피로와 두통 및 신체동통, 혼돈과 불안, 공황과 불안, 감각이상과 심계항진, 진전과 공포, 진전과 불안, 공황과 공포 등의 문항 간에는 확실히 상관이 있었다. 성적 분포는 50점 이상인 경우가 17.5%(29명)이였다. SAS에서 각 문항들의 신뢰도는 Cronbach 알파를 사용하여 검토한 결과 비교적 양호한 것으로 나타났다. SAS의 문항 전체의 신뢰도는 0.71로 나타났다.