• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.33-52
• /
• 2017

A cantilever beam with a breathing crack is studied to improve the breathing crack identification sensitivity by the parametric optimization of sample entropy and wavelet transformation. Crack breathing is a special bi-linear phenomenon experienced by fatigue cracks which are under dynamic loadings. Entropy is a measure, which can quantify the complexity or irregularity in system dynamics, and hence employed to quantify the bi-linearity/irregularity of the vibration response, which is induced by the breathing phenomenon of a fatigue crack. To improve the sensitivity of entropy measurement for crack identification, wavelet transformation is merged with entropy. The crack identification is studied under different sinusoidal excitation frequencies of the cantilever beam. It is found that, for the excitation frequencies close to the first modal frequency of the beam structure, the method is capable of detecting only 22% of the crack depth percentage ratio with respect to the thickness of the beam. Using parametric optimization of sample entropy and wavelet transformation, this crack identification sensitivity is improved up to 8%. The experimental studies are carried out, and experimental results successfully validate the numerical parametric optimization process.

• 한국정밀공학회지
• /
• 제25권7호
• /
• pp.116-123
• /
• 2008

In the fossil power plant, the reliability of the components which consist of the many welded parts depends on the quality of welding. The residual stress is occurred by the heat flux of high temperature during weld process. This decreases the mechanical properties as the strength of fatigue and fracture or causes the stress corrosion cracking and fatigue fracture. Especially, the accidents due to the residual stress occurred at the weld parts of high-temperature and high-pressure pipes and steam headers. Also, the residual stress of the welded part in the recently constructed power plants has been brought into relief as the cause of various accidents. The aim of this study is the measurement of the residual stress using the x-ray diffraction method. The merits of this are more accurate and applicable than other methods. The materials used for the study is P92 steel for the use of high temperature pipe on super critical condition. The variables of tests are the post-weld heat treatment, the surface roughness and the depth from the original surface. The test results were analyzed by the distributed characteristics of the full width at half maximum intensity (FWHM) in x-ray diffraction intensity curve and by the relation of hardness with FWHM.

• 한국항해항만학회지
• /
• 제27권1호
• /
• pp.15-30
• /
• 2003

연안 경비함정의 선상근무 환경은 육상근무 환경에 비하여 매우 열악하여 선상근무 기피와 성원고령화의 원인이 되고 있다. 특히 선박내 소음은 난청과 같은 직업병을 유발시키는 원인이 된다. 따라서 안락한 선상근무 환경 및 거주 환경의 확보를 통하여 선상근무 피로도를 경감시키는 것이 필요하다. 본 연구에서는 먼저 선박내 소음 및 진동의 실선 계측을 통하여 선상근무 환경을 체계적으로 평가한다. 그리고 선상근무 환경의 평가 결과에 기초하여 선상근무 피로도 경감대책을 제안한다

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.118-123
• /
• 2001

Most structures of automobile are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic farces for the evaluations of fatigue life and stress concentration exactly. It is rarely obtained the accurate load history of specified positions because of the errors such as modeling, measurement, and etc. In the beginning of design, exact load data are actually necessary for the fatigue strength and life analysis to minimize the cost and time of designing. In this paper, the procedure of practical dynamic load determination is developed by the combination of the principal stresses of F.E. analysis and experiment. Inverse problem and least square pseudo inverse matrix are adopted to obtain an inverse matrix of analyzed stresses matrix. Pseudo-Practical dynamic load was calculated for Lab. Test of sub-structure. GUI program(PLODAS) was developed for whole of above procedure. This proposed method could be extended to any geometric shape of structure.

• PNF and Movement
• /
• 제6권3호
• /
• pp.1-9
• /
• 2008

Purpose : The purpose of this study was to analyze the reaction of recovery for the fatigue by sports massage treatment after Taekwondo training and then to verify the effectiveness. Subject : The subjects of this study were all the 20 high school Taekwondo players divided into two groups (rest recovery group and sports massage group) selected by systematic random assignment sampling. Method : The variables were the level of hemoglobin, lactic acid and glucose, and measured at rest, immediately-after exercise and 30-minute recovery. The data from this study were analyzed by using one-way ANOVA, independent sample t-test. Results : The results are as follows ; 1. The measurement of the hemoglobin, there was not the significant differences between experiment group and control group. 2. The lactate showed lower in the experiment group than in the control group in 30-minute recovery (p<.001). 3. The glucose showed lower in the experiment group than in the control group in 30-minute recovery (p<.01). So I think the sports massage treatment is more effective in the relief of fatigue than static rest method during the recovery after sports. However the massage treatment influence on the activation of metabolism according to the intensity and the duration of sports, and vary the effect of treatment according to the method and execution time. Therefore the longitudinal investigation of the variation by the long time massage through the more detailed program must be requisite for us.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권5호
• /
• pp.380-388
• /
• 2004

This study proposed an improved spike detection algorithm which automatically detects suitable spike threshold on the amplitude of surface electromyography(SEMG) signal during isometric contraction. The EMG data from the low back muscles was obtained in six channels and the proposed signal processing algorithm is compared with the median frequency and Gabriel's spike parameter. As a result, the reliability of spike parameter was inferior to the median frequency. This fact indicates that a spike parameter is inadequate for analysis of multi-channel EMG signal. Because of uncertainty of fixed spike threshold, the improved spike detection algorithm was proposed. It automatically detects suitable spike threshold depending on the amplitude of the EMG signal, and the proposed algorithm was able to detect optimal threshold based on mCFAR(modified Constant False Alarm Rate) in the every EMG channel. In conclusion, from the reliability points of view, neither median frequency nor existing spike detection algorithm was superior to the proposed method.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.871-876
• /
• 2008

The blade vibration problem of bladed disk is the most critical subject to consider since it directly affects the stable performance of the engine as well as life of the engine. Especially, due to complicated vibration pattern of the bladed disk, more effort was required for vibration analysis and test. The research of measuring the vibration of the bladed disk, using NSMS(Non-intrusive stress measurement) instead of Aeromechanics testing method requiring slip ring or telemetry system with strain gauge, was successful. These testing can report the actual stresses seen on the blades; detect synchronous resonances that are the source of high cycle fatigue(HCF) in blades; measure individual blade mis-tuning and coupled resonances in bladed disks. In order to minimize the error being created due to heat expansion, the tip timing sensor is installed parallel to the blade trailing edge, yielding optimal result. Also, when working on finite element analysis, the whole bladed disk has gone through three-dimensional analysis, evaluating the family mode. The result of the analysis matched well with the test result.

• Korean Journal of Otorhinolaryngology-Head and Neck Surgery
• /
• 제60권3호
• /
• pp.99-106
• /
• 2017

Listening effort is defined as a listener's mental exertion required to understand a speaker's auditory message, especially when distracting conditions are present. This review paper analyzed several subjective scaling tools used to measure the listening effort in order to suggest the best tool for use with hearing-impaired listeners who have to expend much effort even in everyday life. We first explained the importance of measuring listening effort and discussed various kinds of measurements. We then analyzed and categorized 15 recently published articles (i.e., from 2014 to 2016) into three topics: performance and listening effort, listening effort and fatigue, and clinical implication of listening effort. We compared the articles in terms of pros and cons and also identified 10 tools for use in the subjective scaling. Although none of these tools were unified or standardized easily, we concluded that 7-point scale would be the most reasonable as a less time-consuming measurement for compartmentalizing the degree of listening effort. If used with objective tools for measuring the listening effort, the subjective scaling could be a powerful tool for clinical use.

• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.24-32
• /
• 2021

The size of container ships is increasing to increase the cargo loading capacity. However, container ships are limited in terms of the hull longitudinal strength. To overcome this limitation, brittle crack arrest steel can be used. This study was aimed at examining the influence of the heat input on the welding procedures of flux cored arc welding and submerged arc welding. In the experiment, the crack tip opening displacement test, which pertains to a parameter of fracture mechanics, was performed, and a 3-point bending tester was adopted. Based on the results, the crack measurement method was presented, and the stress expansion coefficient value for the pre-fatigue crack length was derived according to the heat input after the pre-cracking length was measured. It was noted that the heat input affected the crack tip opening displacement of brittle crack arrest steel.

• 콘크리트학회논문집
• /
• 제15권5호
• /
• pp.635-642
• /
• 2003

최근들어 노후화된 교량의 증가에 따라 바닥판의 보강효과에 대한 많은 연구가 이루어지고 있으나 대부분의 연구는 실험실 수준에 국한되어 있으며, 구조물의 피로거동은 이동하중이 아닌 고정반복하중에 의한 연구가 집중적으로 시행되고 있다. 본 연구에서는 이동하중의 영향을 반영하기 위하여 국내에서 실측된 축하중으로 활하중 모델을 제시하였다. 확률론적 해석과 신뢰성 해석을 적용하여 탄소섬유쉬트와 격자형 탄소섬유로 성능향상된 바닥판의 보강효과 및 연장수명을 예측한 결과 성능향상 된 설계 2등급의 교량바닥판은 일반적인 증가 차량하중에 대하여 사용기간동안 충분한 내하력뿐만 아니라 충분한 피로거항성을 갖는 것으로 나타났다.