• 대한전자공학회논문지
• /
• 제25권9호
• /
• pp.1074-1080
• /
• 1988

A new approach to the measurement of muscle fatigue by adaptive digital filtering algorithm is proposed. Unlike previously reported methods, it can estimate the muscle fatigue at every sample as the EMG signal statistics change. As a result, the muscle conduction velocity ranged between 4.2-5m/s at low tension and 3-4m/s at fatigue state.

• 대한한의학회지
• /
• 제21권4호
• /
• pp.55-63
• /
• 2000

Objectives : Fatigue is a common symptom experienced by everyone. Nevertheless, clinicians have a tendency of ignoring it since fatigue itself is not considered a distinct disease. Actually, some limited research about chronic fatigue syndrome has been made within the country, but in reality, the probability of getting this syndrome is still considered very low due to the strict diagnosis standard. Therefore, there are tremendous numbers of patients who do not get enough attention from clinicians for their fatigue symptoms only because technically they do not belong to the syndrome. Therefore, a basic statistical database must be compiled and patient management programs must be developed. To accomplish this, we conducted this study by measuring degree of fatigue, clinical characteristics and processes of Oriental medical treatment of fatigue patients. Methods : The objects of this study were selected from the new patients who entered the tonification Clinic in Kynnghee Oriental Medical Center between August 11, 2000 and October 7, 2000. Their main complaint was fatigue and they did not suffer from any physical or mental problem either historically or at the time of the study. The objects were divided into two groups based on duration of fatigue; fatigue under 6 months is considered as acute fatigue and fatigue for longer than 6 months is chronic fatigue. The prepared survey sheet for measuring fatigue degree was distributed to the patients with their consent. The patients were divided again into three subgroups : the fIrst group went through 1st test and constitution test after tonification clinic; the second one went into constitution test skipping Ist measuring test; the third one went into only tonification clinic with neither 1st measuring test nor constitution test. Results : The total number of object patients was 47 and 80% of them were considered as 'fatigue patients' by the Chalder scale. Among all patients, 29.5% requested treatment for chronic fatigue, which is over 6 months. The average of scale II for all patients was 14.8, which indicates moderate fatigue. The averages of scale II-1, II-2, II-3 were respectively 7.5, 5.9, and 3.7 so the most common complaint was physical fatigue. When compared scale II based on occupations, student group scored 6.9 and office man group scored 8.5 in scale II-1, physical fatigue, but it was not significant. Conclusions : Numerous number of patients have come to Oriental medical centers or hospitals in Korea. Therefore, deeper statistical research and follow-up-monitoring are reqnired in the Oriental medical academic world. In this study, among all patients who entered the tonification Clinic in Kyunghee Oriental Medical Center, 29.5% requested treatment for chronic fatigue, which is over 6 months. This kind of statistical report is the first time trial in the Oriental medical academy world. Through these steps, more objective treatment can be made and standards of prognosis assessment can be established.tablished.

• 대한기계학회논문집
• /
• 제12권1호
• /
• pp.123-130
• /
• 1988

본 연구에서는 비교적 데이터 처리속도가 빠른 80286계의 CPU를 사용한 16bit 퍼스널 컴퓨터를 이용하는 경우보다, 가격면에서는 훨씬 유리하면서도, 성능은 거의 뒤지지 않는 피로시험 자동화 및 피로거동 고정밀 측정을 위한 시스템을 완성하였다. 본 연구에서 사용한 방법 및 작성한 소프트웨어등은 사용시험기, 피로연구 대상등에 거의 관계없이 이용이 가능하나, 여기서는 편의상, 시험기로서는 폐루우프(closed-loop)유압서어보 피로시험기를 사용하였으며, 피로거동의 측정에 대해서는 주로 피로균열지전을 대상으로 하였다.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.101-108
• /
• 2014

About 40% of reactors in the world are being operated beyond design life or are approaching the end of their life cycle. During long-term operation, various degradation mechanisms occur. Fatigue caused by alternating operational stresses in terms of temperature or pressure change is an important damage mechanism in continued operation of nuclear power plants. To monitor the fatigue damage of components, Fatigue Monitoring System (FMS) has been installed. Most FMSs have used Green's Function Approach (GFA) to calculate the thermal stresses rapidly. However, if temperature-dependent material properties are used in a detailed FEM, there is a maximum peak stress discrepancy between a conventional GFA and a detailed FEM because constant material properties are used in a conventional method. Therefore, if a conventional method is used in the fatigue evaluation, thermal stresses for various operating cycles may be calculated incorrectly and it may lead to an unreliable estimation. So, in this paper, the modified GFA which can consider temperature-dependent material properties is proposed by using an artificial neural network and weight factor. To verify the proposed method, thermal stresses by the new method are compared with those by FEM. Finally, pros and cons of the new method as well as technical findings from the assessment are discussed.

• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.26-33
• /
• 1984

Constant-load-amplitude fatigue crack growth tests were carried out on 5083-0 aluminum alloy under elastic and elastic-plastic conditions. Crack length, crack closure and monotonic fatigue deformation were measured by Kikukawa's unloading elastic compliance monitoring technique and elastic-plastic fatigue crack growth rates were analysed in terms of J integral. Elastic-plastic fatigue crack growth rates can be well expressed by effective cyclic J integral until general yielding occurs. Beyond general yielding, monotonic fatigue deformation becomes significant and growth rates cannot be characterized by a single parameter of effective cyclic J integral alone. However, introducing one more parameter, maximum J integral J$_{max}$ to account for the effect of monotonic fatigue deformation, can explain fatigue crack growth behavior beyond general yielding.

• Structural Monitoring and Maintenance
• /
• 제5권4호
• /
• pp.429-443
• /
• 2018

Fatigue is a principal failure mode for steel structures, and it is still less understood than any other modes of failure. Fatigue life estimation of metal bridges is a major issue for making cost effective decisions on the rehabilitation or replacement of existing infrastructure. The fatigue design procedures given by the standard codes are either empirical or based on nominal stress approach. Since the fatigue life estimation through field measurements is difficult and costly, more researches are needed to develop promising techniques in the fatigue analysis of bridges through Finite Element Analysis (FEA). This paper aims to develop a methodology for the Fatigue life estimation of railway steel bridge using FEA. The guidelines of IIW-1823-07 were used in the development of the methodology. The Finite Element (FE) package ANSYS and the programming software MATLAB were used to implement this methodology on an Indian Railway Standard (IRS) welded plate girder bridge. The results obtained were compared with results from published literature and found satisfactory.

• 비파괴검사학회지
• /
• 제36권5호
• /
• pp.345-352
• /
• 2016

높은 고도에서 운행되는 항공기는 -$50^{\circ}C$이하의 극저온 피로환경에 노출된다. 이때 반복하중을 통해 발생되는 크랙과 같은 미세결함은 항공기 구조물의 물성변화를 야기하고 구조물 파단과 같은 심각한 구조적 결함을 야기한다. 따라서 효율적인 구조물의 유지보수 및 수명 예측을 위해 구조물의 지속적인 상태진단이 필요하다. 본 연구에서는 실제 항공기 운행조건과 유사한 극저온 피로환경에서 항공기 날개의 구조 건전성 모니터링을 수행하였다. 초기 결함 탐지를 위해 사각배열 압전구동기 및 센서를 구조물 하단에 부착한 뒤, 유도초음파 기반 능동센싱 기법을 통해 손상에 의한 산란 및 반사파를 측정하였다. 이후 통계학적 모델 분석과 위상배열기법을 통해 손상 발생 시점을 파악 및 손상 위치 탐지를 실시하였다. 또한, 극저온 환경에서의 센서의 생존성 파악과 구조 건전성 모니터링 결과의 신뢰성 향상을 위해 센서자가진단을 실시하였다. 실험 결과, 제안된 기법을 통해 극한환경에서 운행되는 구조물의 초기 손상 탐지 및 손상 위치 탐지가 높은 정확도로 가능함을 확인하였다.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.323-330
• /
• 2008

소구경 배관 소켓 용접부의 고주기 피로특성윽 평가하고 피로 균열의 발생을 음향방출법을 이용하여 실시간 모니터링 하였다. 스테인리스 316L강 시험편은 가스텅스텐아크용접 공정으로 루트부에 결함이 없는 시험편과 용입불량 결함이 있는 시험편으로 준비하였다. 피로파단은 고응력 일때는 토우부, 상대적으로 저응력일 때는 루트부에서 일어났다. 피로시험동안 음향방출 카운트가 급격히 증가하는 시점을 균열의 발생 싸이클 ($N_i$)로 정의하였고 방사선투과법과 전자현미경을 이용하여 피로균열 생성 싸이클 전과 후에서 균열을 확인하였다. 소켓용접배관의 굽힘피로 손상 진단 및 감시를 위해 균열의 존재와 파괴모드 그리고 균열의 발생 싸이클에 관한 연구를 수행하였다.

• Smart Structures and Systems
• /
• 제2권2호
• /
• pp.101-113
• /
• 2006

Structural health monitoring results obtained with the electro-mechanical (E/M) impedance techniqueand Lamb wave transmission methods during fatigue crack propagation of an Arcan specimen instrumented with piezoelectric wafer active sensors (PWAS) are presented. The specimen was subjected in mixed-mode fatigue loading and a crack was propagated in stages. At each stage, an image of the crack and the location of the crack tip were recorded and the PWAS readings were taken. Hence, the crack-growth in the specimen could be correlated with the PWAS readings. The E/M impedance signature was recorded in the 100 - 500 kHz frequency range. The Lamb-wave transmission method used the pitch-catch approach with a 3-count sine tone burst of 474 kHz transmitted and received between various PWAS pairs. Fatigue loading was applied to initiate and propagate the crack damage of controlled magnitude. As damage progressed, the E/M impedance signatures and the waveforms received by receivers were recorded at predetermined intervals and compared. Data analysis indicated that both the E/M impedance signatures and the Lamb-wave transmission signatures are modified by the crack progression. Damage index values were observed to increase as the crack damage increases. These experiments demonstrated that the use of PWAS in conjunction with the E/M impedance and the Lamb-wave transmission is a potentially powerful tool for crack damage detection and monitoring in structural elements.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1887-1894
• /
• 2024

Fatigue strength of the structural materials of lead-cooled fast reactors (LFRs) and accelerator-driven systems (ADS) may be degraded in liquid metal (Lead or lead-bismuth eutectic (LBE)) environments. The fatigue crack growth (FCG) data of structural materials in liquid LBE are necessary for damage tolerance design, safety assessment and life management of key equipment. A novel monitoring system for fatigue crack length was designed on the compliance method and the monitor technology of crack opening displacement (COD) of CT specimens by the linear variable differential transformers (LVDT) system. It can be used to predict the crack length by monitoring the COD of CT specimens in harsh high-temperature liquid LBE using a LVDT system. The prediction accuracy of this system was verified by FCG experiments in room temperature air and liquid LBE at 150, 250 and 350 ℃. The first results obtained in the FCG test for T91 steel in liquid LBE at 350 ℃ are presented.