• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• The Journal of Korean Society for School & Community Health Education
• /
• v.11 no.2
• /
• pp.115-127
• /
• 2010

Objectives: This study was carried out to investigate the effects of improvement in health promotion behavior of nursing college students by the difference of self esteem. The students was divided two groups one is low level self esteem the other is high depending on median point of self esteem. The specific objectives were first, to find out the differences of health promotion behavior, self efficacy, health perception, fatigue level, depression, psychosocial wellbeing, second, to establish which factors determine their health promotion behavior between two groups. Methods: Self-administered questionnaires were given to 262 students enrolled in a nursing college. between may and June 2008. The questionnaire items included age, sex, education level, self esteem, self efficacy, health perception, fatigue, depression,, psychosocial well being and health promotion behavior. For statistical analysis, frequency, t-test, regression used for determining the factors effecting health promotion behavior. Results: The influencing factors were self efficacy among low level and self efficacy, fatigue and stress among high level. Self efficacy strong positive impact on health promotion behavior among both groups. Stress and fatigue was only effective among high level group. Conclusion: Based on the study results, improvement of health promotion behavior among nursing students requires the development and application of programs to manage self efficacy and stress as a precondition for depending on self esteem level.

• Perspectives in Nursing Science
• /
• v.15 no.1
• /
• pp.18-28
• /
• 2018

Purpose: This study was designed to explore the levels of physical activity and fatigue among nurses and to identify the relationship between these variables. Methods: Participants were 89 nurses working at an intensive care unit and an operating room in a children's hospital. Data were collected using self-reported questionnaires including the International Physical Activity Questionnaire and Brief Fatigue Inventory. Results: Most of the nurses' physical activity was work related, and there was a significant difference according to the working unit. Nurses with higher work stress and lower job satisfaction showed higher levels of fatigue than their counterparts did. Work-related physical activity and the interference of fatigue with relationships were related positively, whereas transport and leisure time physical activity were negatively related to usual fatigue and the interference of fatigue with life enjoyment. Conclusion: The levels of physical activity and fatigue of nurses were higher than those observed among other populations. The appropriate level of physical activity for these nurses needs to be investigated carefully. Also, in the intervention for nurses' fatigue, their level of work-related and leisure-time physical activity should be considered separately, and their work environment and psychological satisfaction level should be included.

• Korean Journal of Occupational Health Nursing
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2014

Purpose: The purpose of this research was to provide baseline data by utilizing solutions to health problems caused by work-related stress and to examine a way of treatment by comparing and analyzing how the stresses link to fatigue and quality of researchers' life. Methods: A survey was conducted with 50 researchers working for in H research institute in Daejeon Metropolitan City from April 10th to May 10th, 2012 to examine the correlation of work stress, fatigue and quality of life. The data were analyzed using the Kruskal-Wallis test to look into examine the difference in work stress, fatigue, and quality of life. Also, the correlation of work stress, fatigue and quality of life was measured through by the Pearson correlation coefficient. The data collected through the questionnaires was were analyzed by SPSS 21.0 based on the significant level with a p-value, 0.05. Results: The results showed that fatigue was caused by work stresses in researchers and quality of life was ranked in a relatively low level. Correlation of work stresses, quality of life and fatigue and work stresses against mental health index was negative and fatigue against physical index was also negative. Conclusion: It is necessary to maintain more detailed provisions in order to improve mental health and stress level of researchers. Moreover, systematic, in-depth evaluation should be done to reduce researcher's work-related stress and fatigue. In addition, stress management and prevention program should be implemented for these researchers.

• Animal Bioscience
• /
• v.36 no.2
• /
• pp.307-314
• /
• 2023

Objective: Chicken essence and branched chain amino acid (BCAA) supplementation has been recognized to significantly relieve fatigue. To obtain chicken essence with high amounts of BCAA, spent hens herein was used to prepare dripped chicken essence (SCE) and compared with commercial dripped chicken essence (CCE) for in vivo anti-fatigue effect. Methods: To determine the effect on anti-fatigue by dripped chicken essence, the exhaustive swimming was performed. Thirty-two 7-week ICR mice were divided into four groups, which included the control group (CG), CCE, SCE-1X and SCE-2X. The mice were given daily oral administration (0.012 mL/g body weight/d). The fatigue index analysis was conducted weekly. Results: The results showed that SCE had a higher BCAA level as expected, and mice treated with dripped chicken essence (CCE and SCE) could significantly improve exercise performance. The lower blood lactate level, blood urea nitrogen level and creatine phosphokinase activity were found in the supplement of SCE group compared with the CCE group, which suggested that the SCE possessed strong anti-fatigue ability. This could possibly be due to the higher content of BCAA. Conclusion: In this study, SCE promoted recovery from physical fatigue in mice and elevated endurance ability. Among them, the double dose (SCE-2X) showed the strongest anti-fatigue ability. Taken together, spent chickens could be a good source of chicken essence to improve the effect of anti-fatigue.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.217-222
• /
• 2009

Safe navigation is closely related to the fatigue of marine officers. Also, the fatigue of duty officer can cause serious marine accidents. In this study, the documentary survey about the marine officers' working environments, fatigue factors and symptoms was conducted. And the questionnaire survey which is related to the fatigue analysis factors such as sleepiness, mental physical workload and alcohol for apprentice officers was carried out, and the results of questionnaire survey were analyzed. Lastly, on the basis of this study, the fatigue analysis model was suggested in order to assess the marine officers' performance in the future.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.5
• /
• pp.247-254
• /
• 2001

Silent period(SP) is transient stops of muscle activity that are induced by mechanical or electrical stimulus and the duration of silent period is a important parameter that have been associated with symptoms of masticatory dysfunction. Muscle fatigue is induced by sustained muscular contractions. It is associated with the external manifestations as the inability to maintain a desired force output, muscular tremor, and localized pain. Muscle fatigue is a parameter that have been measured or monitored the deterioration of a performance of muscles. On the study of relationship between SP and masticatory muscle fatigue, Nagasawa suggested that SP increases up to 3 min. from the beginning of clenching when the subjects performed sustained contractions at 50% maximum clenching level. In this paper, in order to evaluate a relationship between SP and muscle fatigue, 10 SPs per 1 minute are measured at 10%, 20%, 50% maximum clenching level. We used the median frequency in order to quantify the degree of muscle fatigue. However, the results shows that the duration of silent period was not significantly affected by differing levels of muscle fatigue. Therefore, we suggest that the SP is not increased or decreased as the results of muscle fatigue, also the origin of the SP generation mechanism is discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1690-1697
• /
• 2002

The effects of re-peening on the fatigue damaged material are studied in this paper. The effects of re-peening process on surface hardness, surface roughness, surface compressive residual stress, and fatigue life are investigated. The results can be summarized in brief as follows: The depth of hardening layer was increased by re-peening process. There is no large variation of the surface roughness by re-peening process. The compressive residual stress of shot-peened specimen decreases under the fatigue loading and then increases again by re-peening process. Re-peening process increases the fatigue lifo of shot-peened and fatigue damaged specimen. The increase of fatigue lift under high stress level is much higher than under low stress level.

• Journal of Mechanical Science and Technology
• /
• v.14 no.9
• /
• pp.935-946
• /
• 2000

Elastic-plastic stress analysis has been performed to evaluate the fatigue life of an autofrettaged pressure vessel containing cross-bores subjected to pulsating internal pressure of 200 MPa. Finite element analyses were used to calculate the residual and operating stress distributions of the pressure vessel due to the autofrettage process and pulsating internal pressure, respectively. Theoretical stress concentration factors of 3.06, 2.58, and 2.64 were obtained at the cross-bore of the pressure vessel due to internal pressure, 50%, and 100% autofrettage loadings, respectively. Local stresses and local strains determined from the elastic-plastic finite element analysis were employed to calculate the failure location and fatigue life of the pressure vessel with radial cross-bores, incorporating the low-cycle fatigue properties of the pressure vessel steel and fatigue damage parameters. Increase in the amount of overstrain by autofrettage process moved the crack initiation location from the inner radius toward a mid-wall, and extended the crack initiation life. Predicted fatigue life of the fully autofrettaged pressure vessel with cross-bores increased about 50%, compared to the unautofrettaged pressure vessel. At the autofrettage level higher than 50%, the failure location and fatigue life of the pressure vessel were not significantly influenced by the autofrettage level.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.4
• /
• pp.296-309
• /
• 2009

Thick-walled cylinder with high pressure have had wide application in the armament industry. In the thick-walled cylinder, fatigue crack is generated at inner radius and developed toward the outer radius. To prevent generation of fatigue crack, the autofrettage process had been used. The compressive residual stress induced by the autofrettage process extends loading pressure and fatigue life of the thick-walled cylinder. In this study, the residual stress of single and compound cylinder by the autofrettage process was evaluated. The analytical compressive residual stress of single cylinder was good agreement with experimental result at inner radius. The analysis on the residual stress of compound cylinder was conducted. The compressive residual stress at inner radius was increased with the overstrain level. And fatigue life of the compound cylinder with initial crack was evaluated. The considered initial crack shape was straight and semi-elliptical. The fatigue life was extended with the overstrain level. The fatigue life of the compound cylinder with semi-elliptical crack was longer than straight crack. The suitable way to extend fatigue life of the compound cylinder was proposed.