• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.99-108
• /
• 2011

Almost all companies have paid much attention to the safety management ranging from maintenance to operation even at the stage of designing in order to prevent accidents, but fatal accidents continue to increase throughout the world. In particular, it is essential to systematically prevent such fatal accidents as fire, explosion or leakage of toxic gas at factories in order to not only protect the workers and neighbors but also prevent economic losses and environmental pollution. Though it is well known that accident probability is very low in NPP(Nuclear Power Plants), the reason why many researches are still being performed about the accidents is the results may be so severe. HRA is the main process to make preparation for possibility of human error in designing of the NPP. But those techniques have some problems and limitation as follows; the evaluation sensitivity of those techniques are out of date. And the evaluation of human error is not coupled with the design process. Additionally, the scope of the human error which has to be included in reliability assessment should be expanded. This work focuses on the coincidence of human error and mechanical failure for some important performance shaping factors to propose a method for improving safety effectively of the process industries. In order to apply in these purposes into the thesis, I found 63 critical Performance Shaping Factors of the eight dimensions throughout studies that I executed earlier. In this study, various analysis of opinion of specialists(Personal Factors, Training, Knowledge or Experience, Procedures and Documentation, Information, Communications, HMI, Workplace Design, Quality of Environment, Team Factors) and the guideline for construction of PSF were accomplished. The selected method was AHP which simplifies objective conclusions by maintaining consistency. This research focused on the implementation process of PSF to evaluate the process of PSF at each phase. As a result, we propose an evaluation model of PSF as a tool to find critical problem at each phase and improve on how to resolve the problems found at each phase. This evaluation model makes it possible to extraction of PSF succesfully by presenting the basis of assessment which will be used by enterprises to minimize the trial and error of construction process of PSF.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.916-923
• /
• 2023

Purpose: Looking at the status of fatal accidents in the construction industry in the 2022 Industrial Accident Status Supplementary Statistics, 27.8% of all fatal accidents in the construction industry are caused by construction equipment. In order to overcome the limitations of tours and inspections caused by the enlargement of sites and high-rise buildings, we plan to build a model that can extract construction equipment using computer vision technology and analyze the model's accuracy and field applicability. Method: In this study, deep learning is used to learn image data from excavators, dump trucks, and mobile cranes among construction equipment, and then the learning results are evaluated and analyzed and applied to construction sites. Result: At site 'A', objects of excavators and dump trucks were extracted, and the average extraction accuracy was 81.42% for excavators and 78.23% for dump trucks. The mobile crane at site 'B' showed an average accuracy of 78.14%. Conclusion: It is believed that the efficiency of on-site safety management can be increased and the risk factors for disaster occurrence can be minimized. In addition, based on this study, it can be used as basic data on the introduction of smart construction technology at construction sites.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.804-810
• /
• 2017

Distress accidents occur annually by and failure of sea rescue and time delay lead to fatal accident. In the event of maritime distress, most of the equipments used for search and rescue are in responsible for the position of ships. An MOB equipment is a representative equipment for lifesaving and uses AIS communication method. However, the MOB equipment has problems of interference with existing vessel traffic process and it is difficult to apply because there is no proper certification standard. Therefore, this paper proposes a maritime search and rescue supporting system using smartphone. Utilizing the widely constructed IT infrastructure, it collects position information of the fishing boat and leisure ship using GPS embedded in the smartphone. Also the developed system supports to participate in the rescue by sending the information about the occurrence of the survivor in a certain area to the ship operator.

• The Korean Society of Law and Medicine
• /
• v.12 no.1
• /
• pp.43-67
• /
• 2011

Humankind history is faced with one gigantic turning point due to development of Living genetically Modified Organisms. Food production by means of LMO is on the acceleration in an effort to solve the shortage of food problems. Food is also used as alternative energy source. Use of LMO product is not only limited to food and energy, but is actively utilized in various fields of medicines. This paper is first to check out the state of biomedicine developed and associated problems from industries that use LMO, after which we made an attempt on legislative approach to find out means of relief, through examples of such laws legislated for the sufferer from the adverse effect of the biomedicine. As for the liable subject to bear the responsibility for compensatory damage in a way of relieving the victim owing to adverse effect of biomedicine, those who manufactured and sold biomedicine and who are related to the damage to the victim due to the accident and medical doctors and pharmacists who prescribe and administer the medicine in question have been looked into. Accidents involving medicines and medical supplies could take place without reason for imputation on part of the liable subjects or fault of the victim, in which case the victim can't receive damage compensation from any of both parties. When such accidents happened turn out to be no fault accidents, introduction of damage relief measures might have to be reviewed against side effects of medicine and medical supplies as no fault compensation in order for actual relief to be possible. Talking about technicality of legislation, we can suggest a method of strengthening the accountability of manufacturer for stereotypical agenda on biomedicines by newly legislating special regulation with an issue that resists claim on risks associated with the development of medicine and incorporating the same into Manufactured Product Liability Law. After all, when an accident happens associated with biomedicine, the damage will be done to the consumer. And the consumer will be exposed to fatal danger even without the time to cope with potential risks associated with medicine and medical supplies they take. Therefore, it is necessary to protect the potential victim by having the manufacturer of biomedicines bear the liability of medical risks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.5
• /
• pp.202-217
• /
• 2021

Following the fatal accident of pedestrians caused by Autonomous Vehicle by Uber, the world's largest ride-hailing company, two people were killed in a self-driving car accident by Tesla in April. There is a need to ensure the safety of road users. Accordingly, in order to secure the safety of Autonomous Vehicle driving, it is necessary to evaluate Autonomous Vehicle driving technologies in various situations based on the road and traffic environment in which the Autonomous vehicle will actually drive. Therefore, this study used UC-win/Road ver.14.0 based on general driver's license test questions to present a virtual reality-based Autonomous Vehicles driving ability evaluation tool among various driving ability test method. Based on this, it was intended to test driving ability for unexpected situations in complex and diverse driving environments, and to confirm its practical applicability as an optimal tool for Autonomous vehicle ability test and evaluation.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• Journal of Environmental Health Sciences
• /
• v.38 no.2
• /
• pp.166-174
• /
• 2012

Introduction: After 17 years since the first production of humidifier disinfectants in Korea, Korea Centers for Disease Control and Prevention (KCDC) announced that the odds ratio of lung injury related with humidifier disinfectant usage was 47.3 (95% confidence interval 6.0-369.7) according to a case-control study with 18 adult cases, including 8 pregnant women at a university hospital in Seoul. Results: From September 2011 to April 2012, one-hundred and seventy four victim cases have been reported to an environmental non-governmental group (NGO). We summarized timetable of humidifier disinfectants accidents, analyzed health outcomes (death, lung or lung and heart transplantation, pulmonary disease) of reported victims, and classified some information for humidifier disinfectants with health outcomes, and government action for this accident. Among the victims, number of death cases are 52 (30.0%), including 26 babies less than 3 years old. Sixty-nine victims come from twenty-seven family with 2 to 4 members per family. About twenty types of humidifier disinfectant products and about 600,000 product items a year have been sold. Fifty-two death cases used 7 different types of disinfectant products, including imported goods and some private brands of well-known supermarkets. KCDC confirmed inhalation toxicity of 6 products through an animal experimental test, and based on this observation recalled disinfectants containing PHMG (polyhexamethylene guanidine) and PGH (Oligo(2-(2-ethoxy)ethoxyethyl guanidinium chloride). Discussions: The use of these biocides involved highly fatal consequences among biologically vulnerable victims, such as pregnant women, several family member victims after semi-acute exposure. This is the first biocide disaster in Korea with non-specific targets, and unknown scale of victims, warranting concerns on use of biocides in the living environment. Conclusions: Special administrative agency for chemical safety and compensation act for environmental health victims are needed to prevent similar problems.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.83-89
• /
• 2013

Energy industry facilities can cause fatal damage for internal industry employee as well as external general people because handling various kinds of gas and harmful substance might be spread to large scale severe accident by fire, explosion, and toxic gas leakage. In order to prevent these accidents, quantification by damage effect on structure and human is tried by using quantitative risk assessment, but it is difficult to process instantly exceptional cases and requires knowledge of expert. This paper aims to minimize exceptional cases and knowledge of expert, and present risk with human perceptible. So, we designed and developed zone-base risk analysis system that can compute risk of zone in real time at that point using database and incremental model.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.15-25
• /
• 1994

Based on Fatal Accident Reporting System (FARS) data, safety belt effect- tiveness in preventing fatalities is investigated for the following five types of crashes: frontal, left, rear, right, and rollover. Passenger cars containing two occupants, a driver and a right front passenger, are included in this analysis. For each crash type, these cars containing the two occupants are classified into four categories according to the safety belt usage categories for the two front seat occupants, namely, both belted, both unbelted, and either one was belted but not both. Relative risks of driver and right front passenger fatalities are compared among these four cases. For each crash type, two independent estimates of safety belt effectiveness are obtained for drivers and for right front passengers. The weighted average of the two estimates is calculated for drivers and for right front passengers for the five crash types. Using FARS data starting 1978 throught 1983, safety belts are more effective in rollover accidents than in frontal collisions. In rollover accidents, safety belt effectiveness estimate for drivers is $68%{\pm} 6% $ and that for right front passengers is $71%{\pm}6% $ , in which the error limits indicate one standard error. Sfety belt effectiveness estimates for drivers and right front passengers involved in frontal collisions are $41%{\pm} 9% $ and $37%{\pm} 10% $ , respectively. For left and right sided collisions and for both drivers and right-front-passengers, none of the four estimates are significantly different from 0%, statistically : however, when left and right sided collisions are combined with far sided occupants(drivers involved in right sided collisions and right front passengers involved in left sided collisions) safety belt effectiveness is significant, $38%{\pm} 12% $ . For rear collisions, the estimate for drivers shows statistically significant positive effect, $60%{\pm}23% $ . while for right-front-passengers the estimate is not significantly different from 0%. These results show that a safety belt is an effective restraint system not only in frontal crashes but also in a variety of crashes.

• Journal of Chest Surgery
• /
• v.30 no.2
• /
• pp.213-218
• /
• 1997

Pseudoaneurysm of the thoracic aorta is potentially fatal. However, reports of such cases are rare even in large series. We report four cases of thoracic aortic pseudoaneurysm who underwent surgical repair, The causes were considered as infection in two cases (VSD repair, descending thoracic aortic aneurysm resection) and blunt chest trauma by traffic accident in two patients. The pseudoaneurysms developed on ascending aorta suspected as sites of arterial and cardiolplegic needle insertion in one patient. The others were located at descending thoracic aorta immediatly below the left subclavian artery. One patient died of sepsis associated with bile peritonitis and others were followed up from 10 to 18 months with specific morbidity. This study suggest that the incidence of pseudoaneurysm of the thoracic aorta followed by open heart or aorctic surgery can be repaired succesfuly and careful inspection of associated injury is very important in cases of traumatic thoracic pseudoaneurysm.