• Journal of the Chungcheong Mathematical Society
• /
• v.31 no.1
• /
• pp.137-149
• /
• 2018

In this paper, under the assumption of the symmetry point spread function, antireflective boundary conditions(AR-BCs) are considered in connection with the fast truncated Lagrange(FTL) method. The FTL method is proposed as an image restoration method for large-scale ill-conditioned BTTB(block Toeplitz with Toeplitz block) and BTHHTB(block Toeplitz-plus-Hankel matrix with Toeplitz-plus-Hankel blocks) linear systems([13, 17]). The implementation and efficiency of the FTL method in the AR-BCs are further illustrated. Especially, by employing the AR-BCs, both the continuity of the image and the continuity of its normal derivative are preserved at the boundary. A reconstructed image with less artifacts at the boundary is obtained as a result.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.160-165
• /
• 2007

In this paper, we propose a novel signal detection method that achieves the maximum likelihood (ML) performance but requires much less computational complexity than the ML detection. When the well-known linear decoding method is used for space-time block coded (STBC) OFDM systems in fast-fading channels, co-channel interference (CCI) as well as inter-carrier interference (ICI) occurs. A maximum likelihood (ML) method can be employed to deal with the CCI; however, its computational complexity is very high. In this paper, we propose a signal detection method for orthogonal space-time coded OFDM systems that achieves the similar error performance as the ML method, but requires much less computational complexity.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1E
• /
• pp.34-38
• /
• 1996

In this paper, a new fast voronoi divider for vector quantization (VQ) is introduced, which results from Theorem that the nearest vectors in the sense of minimum mean square error(MMSE) have almost the same mean values of their elements. An improved splitting method for a VQ codebook design using the fast voronoi divider is also presented. Experimental results show that the new method reduces the complexity of training a VQ codebook several times with a high signal to noise ratio(SNR) using an appropriate extensive parameter of codebook.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.5
• /
• pp.74-82
• /
• 2011

SSD has a limitation of number of erase/write cycles and does not allow in-place update unlike the hard disk because SSD is composed of an array of NAND flash memory. Thus, FTL is used to effectively manage SSD of having different characteristics from traditional disk. FTL has page, block, log-block mapping method. Among then, when log-block mapping method such as BAST and FAST is used, the performance of SSD is degraded because frequent merge operations cause lots of pages to be copied and deleted. This paper proposes a data allocation and replacement method based on access frequency by allocating PRAM as checking area of access frequency, log blocks, storing region of hot data in SSD. The proposed method can enhance the performance and lifetime of SSD by storing cold data to flash memory and storing log blocks and frequently accessed data to PRAM and then reducing merge and erase operations. Besides, a data replacement method is used to increase utilization of PRAM which has limitation of capacity. The experimental results show that the ratio of erase operations of the proposed method is 46%, 38% smaller than those of BAST and FAST and the write performance of the proposed method is 34%, 19% higher than those of BAST and FAST, and the read performance of the proposed method is 5%, 3% higher than those of BAST and FAST, respectively.

• Journal of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.1-8
• /
• 2001

We present a fast reduction method of survey data obtained using a single-dish radio telescope. Along with a brief review of classical method, a new method of identification and elimination of negative and positive bad channels are introduced using cloud identification code and several IRAF (Image Reduction and Analysis Facility) tasks relating statistics. Removing of several ripple patterns using Fourier Transform is also discussed. It is found that BACKGROUND task within IRAF is very efficient for fitting and subtraction of base-line with varying functions. Cloud identification method along with the possibility of its application for analysis of cloud structure is described, and future data reduction method is discussed.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.21-26
• /
• 2010

This paper proposed an efficient algorithm to reduce the amount of calculation for Scalability Extension which takes a great deal of the operational time in H.264/AVC. This algorithm decides a search range according to the direction of predicted motion vector, and then performs an adaptive spiral search for the candidates with JM(Joint Model) FME(Fast Motion Estimation) which employs the rate-distortion optimization(RDO) method. Experimental results by applying the proposed method to various video sequences showed that the process time was decreased up to 80% comparing to the previous prediction methods. The degradation of video Quality was only from 0.05dB to 0.19dB and the compression ratio decreased as small as 0.58% in average. Therefore, we are sure that the proposed method is an efficient method for the fast inter prediction.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.1100-1108
• /
• 2017

A thermal-hydraulic system code is an essential tool for the design and safety analysis of a nuclear power plant, and its accuracy quantification is very important for the code assessment and applications. The fast Fourier transform-based method (FFTBM) by signal mirroring (FFTBM-SM) has been used to quantify the accuracy of a system code by using a comparison of the experimental data and the calculated results. The method is an improved version of the FFTBM, and it is known that the FFTBM-SM judges the code accuracy in a more consistent and unbiased way. However, in some applications, unrealistic results have been obtained. In this study, it was found that accuracy quantification by FFTBM-SM is dependent on the frequency spectrum of the fast Fourier transform of experimental and error signals. The primary objective of this study is to reduce the frequency dependency of FFTBM-SM evaluation. For this, it was proposed to reduce the cut off frequency, which was introduced to cut off spurious contributions, in FFTBM-SM. A method to determine an appropriate cut off frequency was also proposed. The FFTBM-SM with the modified cut off frequency showed a significant improvement of the accuracy quantification.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.507-515
• /
• 2009

This paper proposes an autonomous decentralized control for a parallel connected uninterruptible power supply (UPS) system based on a fast power detection method using a FPGA based hardware controller for a single phase system. Each UPS unit detects only its output voltage and current without communications signal exchange and a quasi dq transformation method is applied to detect the phase and amplitude of the output voltage and the output current for the single phase system. Fast power detection can be achieved based on a quasi dq transformation, which results in a realization of very fast transient response under rapid load change. In the proposed method, the entire control system is implemented in one FPGA chip. Complicated calculations are assigned to hardware calculation logic, and the parallel processing circuit makes it possible to realize minimized calculation time. Also, an Nios II CPU core is implemented in the same FPGA chip, and the software can be applied for non-time critical calculations. Applying this control system, an autonomous decentralized UPS system with very fast transient response is realized. Feasibility and stable operation are confirmed by means of an experimental setup with three UPSs connected in parallel. Also, rapid load change is applied and excellent performance of the system is confirmed in terms of transient response and stability.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.140-148
• /
• 2016

HEVC(High Efficient Video Coding) has twice times better compression ratio than H.264/AVC, but since the computational complexity has significantly increased in the encoder side, it may cause difficulty in real-time SW implementation in the encoder side. This paper proposes two methods about fast intra prediction. First, fast mode and prediction unit decision method using transform coefficients of the original block is proposed. and second, fast prediction unit decision method using coded block flag(cbf) is proposed. The proposed method achieves 42% encoder speed up with 0.8% bitrate increase compared with HM16.0.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.270-280
• /
• 2013

A fast intra-prediction method is proposed for High Efficiency Video Coding (HEVC) using a fast intra-mode decision and fast coding unit (CU) size decision. HEVC supports very sophisticated intra modes and a recursive quadtree-based CU structure. To provide a high coding efficiency, the mode and CU size are selected in a rate-distortion optimized manner. This causes a high computational complexity in the encoder, and, for practical applications, the complexity should be significantly reduced. In this paper, among the many predefined modes, the intra-prediction mode is chosen without rate-distortion optimization processes, instead using the difference between the minimum and second minimum of the rate-distortion cost estimation based on the Hadamard transform. The experiment results show that the proposed method achieves a 49.04% reduction in the intra-prediction time and a 32.74% reduction in the total encoding time with a nearly similar coding performance to that of HEVC test model 2.1.