• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.185-186
• /
• 2016

Maximum power point tracking (MPPT) techniques play a big role in improving the efficiency of photovoltaic (PV) system. Among various schemes, the incremental conductance (INC) method is mostly discussed in literature because of its fast response to the rapid irradiation changes and high tracking accuracy. However, the existing INC algorithm has trade-offs between fast dynamic response and steady state stability. This study proposes a novel INC method to meet high efficiency and fast tracking performance at the same time.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.345-348
• /
• 2002

This paper presents new fast scalar multiplier of elliptic curve cryptosystem that is regarded as next generation public-key crypto processor. For fast operation of scalar multiplication a finite field multiplier is designed with LFSR type of bit serial structure and a finite field inversion operator uses extended binary euclidean algorithm for reducing one multiplying operation on point operation. Also the use of the window non-adjacent form (WNAF) method can reduce addition operation of each other different points.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.143-148
• /
• 1995

In this paper, we describe a fast 3D video segmentation method using mathematical morphology. The proposed 3D video segmentation algorithm is composed of intra-frame segmentation step and inter-frame segmentation step. In the intra-frame segmentation step, the first frame is segmented using the fast hierarchical segmentation method. Then, in the inter-frame segmentation step, the next frames are segmented using markers that are extracted from the difference of previous segmentation result and simplified present image. Experimental results show that the proposed method has more fast structure and is suitable for video segmentation.

• 한국전자파학회논문지
• /
• 제12권7호
• /
• pp.1076-1085
• /
• 2001

본 논문에서는 균일한 유전체 내의 복잡한 3차원 구조체에 대한 효율적인 기생(Parasitic) 임피던스 성분 추출을 위하여 반복법의 일종인 GMRES(Generalized Minimal RESidual Method)와 결합된 고속 멀티폴(FMM : Fast Multipole Method) 알고리즘을 구현하였다. 이 알고리즘은 준정적 기반 고속 멀티폴 방법으로 다중 도체들 간의 임피던스를 계산하는데 있어 기존의 모멘트법(MoM: Method of Moment)이 가지고 있는 계산량과 시간의 문제를 극복하기 위한 고속화 기술이다. 본 논문에서는 기존 MoM과의 비교를 통해 FMM의 정확성과 효율성을 입증하였다. 또한 멀티폴 알고리즘을 이용하여 기존 MoM으로는 해석이 불가능한 FC-PGA (Flip Chip Pin Grid Array) 패키지 핀에서의 기생 임피던스 성분들을 추출함으로써 신호간의 간섭에 의한 EMI/EMC 문제의 발생 가능성을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.339-350
• /
• 2016

Based on the resonance integral (RI) tables produced by the NJOY program, the conventional subgroup method usually ignores both the resonance elastic scattering and the resonance interference effects. In this paper, on one hand, to correct the resonance elastic scattering effect, RI tables are regenerated by using the Monte Carlo code, OpenMC, which employs the Doppler broadening rejection correction method for the resonance elastic scattering. On the other hand, a fast resonance interference factor method is proposed to efficiently handle the resonance interference effect. Encouraging conclusions have been indicated by the numerical results. (1) For a hot full power pressurized water reactor fuel pin-cell, an error of about +200 percent mille could be introduced by neglecting the resonance elastic scattering effect. By contrast, the approach employed in this paper can eliminate the error. (2) The fast resonance interference factor method possesses higher precision and higher efficiency than the conventional Bondarenko iteration method. Correspondingly, if the fast resonance interference factor method proposed in this paper is employed, the $k_{inf}$ can be improved by ~100 percent mille with a speedup of about 4.56.

• 대한전자공학회논문지SP
• /
• 제44권4호통권316호
• /
• pp.109-116
• /
• 2007

대부분의 2차 및 3차 위상 보간을 사용하는 하모닉 합성 방법은 각각의 정현파 성분에 대해 샘플단위로 합성되기 때문에 구현하는데 있어 많은 연산량이 요구된다. 본 논문에서는 이러한 문제를 해결하기 위해 2차 및 3차 위상 항을 가지는 정현파 음성 및 오디오 모델을 위한 빠른 하모닉 합성 방법을 제안한다. 제안하는 빠른 하모닉 합성 방법은 2차 및 3차 위상함수의 계수를 하모닉과 독립적으로 강요함으로써 오버 샘플링 함수와 위상 변조 함수를 정의하고, Inverse Fast Fourier Transform(IFFT)을 이용한 합성식을 유도한다. 제안한 빠른 하모닉 합성 방법은 연산량과 Segment SNR(Segment Signal-to-Noise Ratio)을 코사인 함수를 이용한 합성 방법과의 비교를 통해 음질의 저하없이 연산량이 현저히 줄어드는 것을 확인할 수 있었다.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1926-1931
• /
• 2012

We investigated a novel fast non-uniform illumination correction method for bi-level images. The proposed method divides a bi-level image into sub-images and roughly estimates block-wise illumination by low pass filtered maximum values of sub-images. After that, we apply bilinear interpolation using the block-wise illumination to estimate non-uniform illumination, and compensate for the effect of non-uniform illumination using the estimated illumination. Since the proposed method is not based on computation intensive iterative optimization, the proposed method can be used effectively for applications that require fast correction of non-uniform illumination. In simulations, the proposed method showed more than 20 times faster speed than existing entropy minimization method. Moreover, in simulations and experiments, the restored images by the proposed method were more close to true images than images restored by conventional method.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3482-3486
• /
• 2013

페이딩 채널에서 야기되는 진폭 및 위상 왜곡을 예측하여 보상하는 PSAM(Pilot Symbol Assisted Modulation)방식의 경우에는 fast 페이딩 채널에서 도플러확산에 의해 심한 성능 저하를 갖는다. 이에 대한 문제점을 분석하고, 이를 개선하기 위한 페이딩 보상 방식을 제안한다. 도플러 확산은 BER 성능을 저하시키는 주된 원인이 된다. 기존의 PSAM 방식과 비교해 보면, 한 심벌 주기 이내의 지연파의 간섭이 있는 환경에서는 기존 PSAM 방식은 도플러확산에 의해 BER이 $10^{-1}$ 정도의 매우 심각한 성능저하를 보이지만 제안된 방식은 도플러 확산이 클수록 성능저하는 발생하지만 기존 방식에 비해 BER이 $10^{-2}$ 이하로 성능이 우수함을 알 수 있다.

• 한국군사과학기술학회지
• /
• 제15권4호
• /
• pp.513-518
• /
• 2012

In this paper, we proposed a method of fast track merging which is the foundation of track to track association technique. The existing method of track merging is performed throughout comparison between tracks to tracks. Therefore, it has heavy calculation time. In our research, we developed a method for fast clustering by using nearest neighbor measurement identification. The simulation results show that the proposed method is more faster than previous method about 3.3%. We expect that this method could be effectively used in multi-target tracking particularly in heavy clutter environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.131-134
• /
• 1988

This Paper describes a algorithm for evaluating the loss of load probability of a generating system using Fast Hartley Transform. The Fast Hartley Transform(FHT) Is as fast as or faster than the Fast Fourier Transform(FHT) and serves for all the uses such as spectral, digital processing and convolution to which the FFT is at present applied. The method has been tested by applying to IEEE reliability test system and the effectiveness is demonstrated.